Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Everman, TX
A gate that won’t close in Everman is not a small problem. It’s a security gap, a liability, and on the black gumbo clay this part of Tarrant County sits on, it’s rarely a one-bolt fix. If your swing gate is dragging the ground after a wet spell or swinging wide open after a dry one, that’s the soil moving under the post, not just a loose hinge. We’re Ironworks Gate Co., and we answer the phone ourselves, 24 hours a day, 7 days a week. Call (817) 961-9404 and a live person picks up. Not a voicemail tree, not a callback queue. Most gate repair calls in Everman are handled in a single visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Everman Homeowners Choose Ironworks Gate Co.
We’ve been doing gate work for over 42 years, since 1984, and in that time we’ve learned something about Everman specifically: the older chain-link and tubular steel gates here were put in decades ago, and they weren’t necessarily set for the soil they’re standing in. Homeowners on the blocks off Enon Avenue and around Johnson Park have called us for years with the same complaint: the gate worked fine for twenty years, and now it won’t stay latched. That’s almost always a post that’s quietly leaned out of plumb, riding the seasonal heave of the clay. Our technicians are background-checked, uniformed, and guided by a straightforward code: Krafted right, Every time, Your home first, Standing behind it. Every job we finish in Everman, whether it’s a welded repair on a driveway gate near I-35W or a full hinge replacement off Trammel Drive, carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing.
Gate Repair Services We Offer in Everman
Gate Repair
A sagging, dragging, or no-latch gate is what we see most often in Everman, and the fix usually involves more than swapping a hinge. We assess the post, the frame, and the hardware together, because on this soil they fail together. Learn more about our Gate Repair in Everman.
Gate Installation
When an old gate is too far gone to rebuild, or when a homeowner in Everman wants a heavier, better-anchored replacement, we install it square on day one. We order, measure, and set everything properly, with a written price agreed before any work starts. Learn more about our Gate Installation in Everman.
Gate Motor & Opener
An automatic opener that struggles or whines on an Everman morning is often fighting a gate frame the clay has torqued out of alignment. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the correct repair happens on the first trip. Learn more about our Gate Motor & Opener in Everman.
Gate Access Control
Keypads, intercoms, and vehicle sensors need to work the first time, every time, especially on properties where the gate is the only secure entry point. We run, program, and test the full access system, not just the pad on the post.
Gate Parts & Welding
Everman’s older steel gates often need a cracked weld repaired or a rotted bottom rail replaced, work that requires a welder’s hand and an honest eye for what’s worth saving. We carry the common hardware and cut and weld what’s not off the shelf.
Neighborhoods We Serve in Everman
We work throughout Everman, including the established blocks around Enon Avenue, the neighborhoods near Johnson Park, the streets off Trammel Drive toward the eastern edge of town, and the older sections west of I-35W. Typical response time for a gate repair call in Everman is same-day or next-day, depending on the time of day you reach us.
- Enon Avenue corridor
- Johnson Park area
- Trammel Drive neighborhoods
- West of I-35W
- Central Everman off Everman Parkway
Why Everman’s Climate & Housing Affect Gate Repair
Everman sits squarely on the Blackland Prairie’s shrink-swell black clay, the same “black gumbo” that makes foundation work a constant topic across North Texas. It heaves in wet springs and contracts in summer droughts, and a gate post set shallow forty years ago simply cannot hold plumb through that cycle. Most of Everman’s housing stock was built between the 1950s and early 1980s, and much of that original chain-link and tubular steel fencing is still in service. The result is a specific pattern our techs know by heart: a swing gate that drags the latch side in March after a wet winter, then swings past the strike and stands gaped open by August when the clay has dried and pulled the post back the other way. The same gate, oscillating between two failure modes every year, because the post was never set for soil that will not stay still.
Then there’s the heat. Summer temperatures in Everman routinely cross 100°F, which accelerates rust at weld points and blisters powder coat on steel gates faster than in more temperate parts of the state. A hinge that looked serviceable in May can be seized or sheared by September. That’s why we don’t patch a symptom and call it done. We check what the soil and the sun have actually done to the gate as a structure, and we correct the post lean or the footer sink before we rehang it.
Pricing for Gate Repair in Everman
Every job is quoted and agreed before any work starts. That’s not a courtesy, it’s how a square deal works. Here’s what Everman homeowners can generally expect for common gate repair work:
- Hinge or latch replacement: $140-$260, including hardware
- Gate post reset (concrete footer): $250-$450, depending on depth and access
- Weld repair on steel gate frame: $120-$300, based on the extent of the crack
- Gate opener repair (board, arm, or sensor): $180-$380
- Full chain-link swing gate rehang: $300-$600
We offer a $50 discount on any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans receive a permanent 5% discount. Call (817) 961-9404 for an exact quote, and you’ll know the number before we turn the first bolt.
Service Area - Cities Near Everman
While this page is for Everman, our crews also serve the surrounding areas of Cleburne, Itasca, Keene, and Joshua. If your property sits just outside Everman, call and we’ll confirm coverage.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Everman
Gate repair in Everman typically runs between $140 and $600 depending on whether it’s a hinge swap, a post reset, or a full rehang. You’ll get an exact written price before any work begins. Call (817) 961-9404 for a free estimate.
In most cases, yes. We carry the common hardware and welding equipment on the truck, and most Everman repair calls are completed in a single visit. Call early in the day for the best chance at same-day service.
It’s the Blackland Prairie clay under the post. Wet springs swell the soil and heave the post, and dry summers shrink the soil and pull it back. A post set shallow decades ago can’t hold through that cycle, which is why we reset the footer rather than just adjusting the hinges.
We’ll tell you straight. If the existing gate is sound and worth saving, we reset the post and rehang it. If the gate itself is rotted, split, or too far out of square to make reliable, we’ll recommend a full replacement and give you a written price either way.
Yes. We’re trained and equipped on nine opener brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener is fighting a gate frame the clay has twisted out of square, we’ll correct both. Call (817) 961-9404 and describe what it’s doing.
Call Ironworks Gate Co. for Gate Repair in Everman, TX
A gate that won’t close, latch, or hold its line is a problem that gets worse every week in Everman’s soil. Don’t wait through another drought cycle. Call (817) 961-9404 and a real person answers, 24 hours a day, 7 days a week. We’ll get you a free estimate, give you a written price before any work starts, and stand behind the job with our 90-Day Done Right Promise. Done right, and backed in writing. That’s the whole deal.
Written by Victor Salinas, Owner at Ironworks Gate Co., a gate specialist serving the Dallas-Fort Worth metro since 1984.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Everman Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher