Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cleburne
A steel pipe-frame driveway gate that won’t budge, or a Cleburne Gate Motor & Opener that just hums and quits, shuts down an entire property. In Cleburne, most gate failures come down to two things: clay soil heaving the posts out of plumb, and operators that have weathered twenty or thirty Johnson County summers. We fix both. Our crews work Cleburne driveways weekly, from the in-town streets near the high school to the ranch gates out past Nolan River Road, and we carry the heavy hardware and control boards to handle most repairs in a single visit. Call (817) 961-9404 for a straight answer and a free estimate.
Why Ironworks Gate Co. Is Cleburne’s Preferred Gate Repair Company
Cleburne is not a suburb. It is a Johnson County seat where a driveway gate is often a working piece of farm equipment, not a decorative touch. The gates out here are heavier, the posts sit in expansive clay, and the operators do not get a gentle life. We have been called to enough 5-to-20-acre homesteads around Cleburne to know what that means for a repair schedule. A properly set post and a correctly adjusted operator last years; a shortcut fails the first time the ground swells after a good rain.
The company behind the work is Victor Salinas, whose crews have kept the same standard across every Cleburne job: background-checked, uniformed technicians who treat a customer’s driveway the way they would treat their own mother’s. The 90-Day Done Right Promise is written on every invoice, not spoken as a sales line. If the gate binds up again or the operator faults within ninety days, we come back and make it right. No paperwork, no argument, no exceptions.
We also answer the phone. A live person picks up 24 hours a day, 7 days a week. When a gate fails on a Sunday evening and a vehicle is stuck inside, the last thing anyone needs is a voicemail tree and a Monday-morning callback.
Our Gate Repair Services in Cleburne
Electric Gate Repair
Most electric gate failures around Cleburne trace to one of three culprits: a control board that has aged out, a wiring run that has been chewed or corroded, or an operator that lost its limits and no longer knows where the gate ends. Gate Access Control in Cleburne often means diagnosing these issues before replacing parts. We carry control boards and arm assemblies for the brands your gate is likely wearing, and we diagnose before we replace. A humming operator is often a $40 capacitor; we tell you that instead of selling you a $900 board.
Automatic Gate Repair
Automatic gate repair in Cleburne often means working on operators installed in the 1980s and 1990s, before UL 325 entrapment standards required photo-eyes and edge sensors. We service those legacy units honestly. If the operator is a solid-brand unit with a replaceable board, we retrofit the safety devices and keep it running. If it is an orphaned brand with no parts available, we tell you straight that replacement is the cheaper answer over the next five years.
Hinge & Post Repair
Out here, the post is the foundation and the foundation moves. Johnson County’s expansive clay swells with winter and spring moisture, then shrinks through the dry summer. That cycle works a creosote-treated wooden hinge post loose season after season until the post tilts, the gate binds at the latch, and the hinge weld cracks. Our Gate Repair team resets posts in concrete footings sized for the soil, and when an old wooden post is rotted at the base, we replace it with steel instead of betting on another piece of lumber.
Gate Realignment
A swing gate that scrapes the ground or refuses to latch has usually moved at the post, not at the hinge. In Cleburne’s clay, even a steel post can drift a quarter-inch a year if it was set in a shallow footing. We re-hang gates with sag correction, re-plumb the posts, and re-tune the operator limits so the gate closes soft against the stop instead of banging or hanging open. This is where a generalist handyman usually fails – the Cleburne Gate Parts & Welding and the electronics have to move together.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cleburne
We are trained and equipped on nine major gate-automation brands, including Cleburne Liftmaster service, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Cleburne we see a lot of older Viking and Linear units on ranch gates, and a growing number of Ghost Controls and BFT on newer acreage builds. Because we stock common control boards, arms, and safety-edge parts for these brands on the truck, we are not waiting a week on a distributor to resolve a gate that left a homeowner trapped. Most Cleburne repairs are done in one visit.
Common Gate Repair Problems We See in Cleburne Homes
- Tilted posts from clay heave. Cleburne sits on expansive clay that swells wet and shrinks dry. A wooden hinge post set in that clay will tilt within a few hard seasons, throwing a heavy pipe gate out of plumb. The latch binds, the operator strains, and eventually something snaps.
- Rotted creosote posts at the soil line. On older ranches, the original hinge posts were creosote-treated timber. Creosote buys decades, but the soil line is the kill zone. Moisture sits against the post base, rot takes hold, and the post tilts as the gate’s weight works the softened wood. We replace these with steel posts in concrete – never another piece of lumber in the same clay.
- Obsolete operator boards with no photo-eyes. Many Cleburne acreage gates run operators installed before 2000, built before UL 325 mandated entrapment sensors. The boards still work, but they lack modern safety circuits. We assess whether a retrofit with photo-eyes and edge sensors is practical, or whether the operator has reached the end of its service life.
- Solar operator failures in the summer heat. Remote driveways outside Cleburne’s power reach rely on solar-powered openers. The problem is not the sun – it is the heat. Johnson County summers routinely exceed 100°F, which degrades rubber seals and cooks circuit boards. We see failed solar charge controllers and swollen batteries on a regular basis from June through September.
Pricing for Gate Repair in Cleburne, TX
Cleburne repair pricing runs on the heavy side, because Cleburne’s gates run heavy. A typical hinge and post reset on a pipe-frame swing gate runs $350 to $700, depending on whether we are replacing a rotted wooden post with steel or resetting an existing steel post in a deeper concrete footing. Gate realignment adjustments run $180 to $320. Electric gate repair ranges from $150 for a limit-switch adjustment or capacitor replacement to $450 to $950 for a control board or arm assembly on a modern operator. A legacy solar operator with a fried board and dead battery runs $600 to $1,200 to repair properly, and sometimes replacement at $1,800 to $3,200 is the honest answer. Every price is quoted and agreed before a single bolt is turned. Call (817) 961-9404 for an exact quote – estimates are free, and $50 off any repair over $250 applies.
We Also Serve Cities Near Cleburne
Our crews regularly work Gate Repair in Cleburne and the surrounding Johnson County communities. If you are in Keene, Joshua, Alvarado, or Burleson, the same technicians, the same stocked trucks, and the same 90-Day Done Right Promise apply. We schedule Cleburne jobs daily and route nearby calls together to keep response times short.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cleburne
Because the expansive clay under your hinge post swells with spring moisture and pushes the post out of plumb. The gate shifts with it, the latch lands wrong, and the whole mechanism fights itself. The fix is a post reset and realignment, not another latch adjustment. Call (817) 961-9404 and we will take a look – estimates are free.
Sometimes yes, sometimes no. A solid brand like LiftMaster or Viking with a replaceable board can usually accept aftermarket photo-eyes and edge sensors, and that retrofit runs $350 to $600. An obsolete orphaned brand with no board support usually costs more to patch repeatedly than to replace at $1,800 to $3,200. We will give you both numbers and let you decide without pressure. Call (817) 961-9404.
A rotted creosote post that tilted at the soil line and threw the gate out of plumb. We cut the hinge welds, set a new steel post in a four-foot concrete footing, and re-hang the gate with sag correction. That job runs $500 to $900 on most Cleburne acreage gates. Call (817) 961-9404 for an exact quote on yours.
They work, but the heat is hard on them. Repeated 100°F+ summers degrade the rubber seals and cook charge controllers. Good solar operators with well-vented battery boxes last five to eight years out here; cheap ones do not survive their third summer. We stock replacement batteries and controllers for the brands common on Cleburne’s remote driveways. Call (817) 961-9404 and we will assess yours.
There is no Cleburne city ordinance requiring photo-eyes on private residential gates, but a gate without entrapment sensors is a serious safety hazard, especially with children or animals on the property. UL 325 has required these devices on new operators since 2001. We recommend retrofitting photo-eyes and edge sensors on any legacy operator, and we will quote the retrofit separately from the repair so you know exactly what you are paying for. Call (817) 961-9404 for a free estimate.
Call Ironworks Gate Co. for Gate Repair in Cleburne
When your gate is down, you need a crew that knows Cleburne’s soil, Cleburne’s heat, and Cleburne’s older operators. Our Gate Repair technicians work these driveways every week. We arrive on time, diagnose honestly, quote the price up front, and stand behind the work in writing. Call (817) 961-9404 for a free estimate, or to schedule a same-week appointment. A live person answers, and the price you agree to is the price you pay.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cleburne’s heavy gates and clay-soil post work since 1984.