Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Aledo
When a wrought iron gate drags across your driveway or a hinge weld shears on a 900-pound ornamental swing gate, you need a crew that understands Aledo’s specific conditions. We do. Our Gate Parts & Welding team works on the heavy estate gates, ranch entrances, and equestrian property driveways throughout 76008, where clay soil movement and Texas heat put unusual stress on steel. We’re not a general handyman service. We’re gate specialists who weld, reinforce, and repair gates so they cycle smoothly for years. Call (817) 961-9404 and a live person answers, day or night.
Why Ironworks Gate Co. Is Aledo’s Preferred Gate Parts & Welding Company
Gate parts and welding in Aledo is not the same work you’d find in a dense Fort Worth suburb. Most properties here are on acreage with automatic entrance gates sized for horse trailers, ranch trucks, and wide agricultural equipment. That means heavier steel, bigger hinge assemblies, and more load on every weld and post. Our technicians come to Aledo equipped for exactly that. We carry reinforced hinge plates, heavy-wall tubing, and the welding equipment needed to repair a 900-lb gate on site, not rig it temporarily and promise to come back.
Victor Salinas runs every job with the same standard: if it’s not right, we make it right. That’s the 90-Day Done Right Promise, and it’s written, not verbal. No paperwork for you to file. No argument. We come back and fix it. Aledo homeowners who’ve lived on their property for twenty years understand what that guarantee means. They’ve dealt with contractors who disappear. We’ve been doing gate work for over 42 years, and we plan to be doing it here for another forty.
When you call about a sagging gate or a bent operator arm, we’ll give you a straight answer on response time to your specific part of Aledo. Many jobs in the 76008 area are completed in a single visit because our trucks carry the common parts and steel stock these repairs need. You’ll also get the price before we start, agreed in writing, so there’s no reckoning at the end.
Our Gate Parts & Welding Services in Aledo
Hinge Replacement
Heavy ornamental gates on Aledo’s estate properties put constant strain on hinge assemblies. When clay soil shifts beneath a post, the gate pulls out of plane and the hinge welds fail first, typically at the bottom barrel or the plate where the hinge meets the post. We cut out the old hinge, grind the post clean, and weld in heavier plates than what came off. On gates sized for horse trailers, we often upgrade to adjustable heavy-duty barrel hinges so future alignment corrections don’t require another weld job. On properties near Old Granbury Road and other long private drives, we see hinge replacement as the second most common repair after post movement.
Post Replacement
This is the Aledo problem. Parker County’s expansive clay heaves and contracts with rainfall, and a gate post set in a shallow footing can move several inches in a single wet season. Once a post moves, the gate binds, the operator arm bends, and the whole system struggles. We don’t just pull the old post and pour a new footing. We bore below the active clay zone, set the post in a concrete collar with a steel core, and often add a backing plate for extra resistance. For automatic swing gates, we verify the post plumb with laser alignment before remounting the gate. That’s the difference between a repair that lasts and one that fails again after the next heavy rain.
Rail Repair
Rails on Aledo’s ornamental iron gates take abuse from sun, impact, and the flexing that comes with soil movement. A cracked or rusted bottom rail lets the gate droop and scrape. We repair or replace rail sections, matching the existing steel profile so the repair doesn’t look like a patch. On custom estate gates with decorative scrollwork or insulated privacy panels, we preserve the original design while restoring structural strength. This matters on Aledo’s newer custom homes, where the gate is part of the property’s curb appeal, not just a security feature.
Custom Welding
Sometimes the right fix is fabricating a part that no longer exists. Older ranch gates around Aledo were often built by local welders who’ve long since retired. When a hinge ear breaks or a latch mount tears out, there’s no catalog part to order. We weld custom replacements on site, matching the original steel thickness and profile. We also build new top rails, reinforcement braces, and complete gate frames. If you need a custom gate built from scratch to match existing fencing or a specific architectural style, we’ll measure, fabricate, and install it with the same 90-Day Done Right Promise on the finished work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aledo
Whether your automatic gate runs on a BFT hydraulic operator, a Linear swing arm, or a Viking slide motor, we service it correctly the first time. Our technicians are factory-trained on nine gate-automation brands, and our trucks are stocked for the repairs we most often perform in Aledo, including limit switches, control boards, and safety edge components. If your Ghost Controls operator is fighting a misaligned gate rather than the gate itself being the fault, we’ll confirm that before recommending any repair. The goal is a gate that opens and closes silently and reliably, regardless of what brand operates it.
Common Gate Parts & Welding Problems We See in Aledo Homes
- Post heave from expansive clay. The clay under Aledo’s gate posts expands when wet and contracts when dry. A post can shift four inches in one spring, bending the operator arm and shearing hinge welds before the gate even looks visibly out of level.
- Hinge weld failure on heavy estate gates. Gates sized for horse trailers weigh hundreds of pounds more than standard residential gates. Over time, repeated cycling fatigues the welds at the hinge plates, and the bottom hinge typically fails first.
- Operator arm bending from forced operation. After a winter ice storm, some owners try to push a frozen gate open rather than wait for it to thaw. That force doesn’t break the gate. It bends the operator arm or strips the internal gears, and then the motor burns out trying to cycle a gate it can no longer move.
- UV-damaged wiring and control boards. Aledo summers push temperatures past 100°F for weeks at a time. Wiring insulation on exposed gate runs gets brittle, and circuit boards inside operator housings degrade faster than in cooler climates. Intermittent failures that only happen on hot afternoons are a classic sign.
Pricing for Gate Parts & Welding in Aledo, TX
Here’s what you can expect for common gate parts and welding work in Aledo. Hinge replacement on a standard ornamental swing gate typically runs $280 to $520 per gate, including labor and heavy-duty hardware. Post replacement with a concrete collar and steel core runs $600 to $1,400 per post, depending on depth, gate weight, and access. Rail repair or replacement runs $180 to $650, depending on the rail profile and length. Custom welding work is quoted by the job: a reinforced hinge plate might be $150 to $350, while a full custom gate frame fabrication can run $1,800 to $6,000 or more. Every price is agreed in writing before we start. You’ll also receive the $50 Off Any Repair Over $250 offer, and if you have another written estimate, we’ll provide a free second opinion. Call (817) 961-9404 for an exact quote on your gate.
We Also Serve Cities Near Aledo
Our technicians serve the full Aledo area and the surrounding communities. If you’re in Crowley, Joshua, Burleson, or Kennedale, we provide the same gate parts and welding expertise with the same 90-Day Done Right Promise. Gate Parts & Welding in Aledo is our focus, but our service area extends to every neighboring town in the western Fort Worth corridor.
Serving Aledo, TX - Our Local Coverage Area
We’re based in the Aledo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Aledo
Your gate post has almost certainly moved. Aledo sits on expansive Parker County clay that swells when wet and shrinks when dry, and a shallow-set post can heave several inches in a single wet season. When the post moves, the gate drops out of plane and scrapes. The fix is not adjusting the hinges and hoping. The post needs to be pulled, re-set below the active clay zone, and reinforced with a concrete collar. Call (817) 961-9404 and we’ll assess it in person.
Yes. We match the existing rail profile and steel thickness, and we can reproduce decorative elements if your gate has scrollwork or ornamental details. The new rail gets welded in, ground smooth, and primed so the repair blends with the original gate. On many Aledo estates, we do this while the gate is still hung, provided the posts are square and the gate is secure.
Upgrade to heavy-duty adjustable barrel hinges with reinforced backing plates welded to both the post and the gate frame. The original hinges on many Aledo ranch gates were sized for a lighter gate, and the weight of a 16-foot gate swinging in Parker County wind eventually fatigues them. We weld the new hinge plates across a wider surface area and often add a third hinge to distribute the load. If the post has already moved, we address the post first; new hinges won’t fix a shifting foundation.
The most common cause in Aledo is ice. When a winter storm freezes the gate track or the hinges, the operator can’t move the gate, but it keeps applying force. Something has to give, and it’s usually the operator arm or the internal gears. If the arm bends, the gate is also likely out of alignment, and continuing to operate it will burn out the motor. Turn the operator off and call us. We’ll straighten or replace the arm, verify the gate alignment, and check the track or hinges that caused the bind. We answer the phone 24/7 at (817) 961-9404.
In most cases, yes. A surface-mounted V-track system can be anchored to an existing concrete or asphalt approach without excavation, provided the surface is stable. On Aledo’s clay soils, we prefer a pier-mounted track system for heavier slide gates because surface mounting can shift with the ground. We’ll assess your driveway, your gate weight, and your soil conditions, then give you a written quote before any work begins.
Call Ironworks Gate Co. for Gate Parts & Welding in Aledo
If your gate is binding, sagging, or broken, don’t wait until the operator burns out or the gate falls off its hinges. Call (817) 961-9404. We’ll answer, ask the right questions, and schedule a visit to your Aledo property. You’ll get an upfront price in writing before we touch a bolt, and every job is covered by our 90-Day Done Right Promise. Victor Salinas and the Ironworks Gate Co. team have been doing this work for over 42 years. We’ll do yours right too.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Aledo and the surrounding Parker County area.