Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Crowley
When a gate post heaves out of plumb on Crowley’s black clay, you don’t need a handyman with a crescent wrench. You need a welder who understands why the ground moved. We’re Ironworks Gate Co., and we’ve repaired, rebuilt, and re-welded gates all over Crowley for years. Hinge replacement, post resetting, custom welding, rail repair, rollers, latches and locks. If it’s steel and it swings, slides, or latches, our Gate Parts & Welding team handles it. Call (817) 961-9404 and a live person answers, any hour, any day.
Why Ironworks Gate Co. Is Crowley’s Preferred Gate Parts & Welding Company
Crowley homeowners tend to be particular about who works on their property. Many have lived here through the big buildout years, watched the subdivisions go up around Deer Creek and along FM 1187, and learned the hard way which contractors stand behind their work and which ones vanish. That’s a big part of why Gate Parts & Welding in Crowley calls go to us so often. We show up when we say we will, our technicians are background-checked and wear uniforms, and every job we complete carries our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork. No arguing.
Victor Salinas leads our crews. He’s been putting his hands on Gate Installation in Crowley long enough to know that Crowley is not Fort Worth, not Burleson, not anywhere else. The clay moves differently here. The HOA expectations run differently here. The difference matters when a weld has to hold through a North Texas ice storm and a July heat wave in the same calendar year.
We also know what it’s like to manage HOA requirements. Your community likely has rules about gate style, height, finish, and even hinge hardware. We work within those rules, coordinate with management companies when needed, and handle the paperwork so the gate gets approved and the job gets done the first time.
Our Gate Parts & Welding Services in Crowley
Post Replacement
In Crowley, post replacement isn’t just cutting out old steel and dropping in new. The Blackland Prairie clay under your driveway swells when it rains and shrinks when it doesn’t, and that movement tilts posts out of plumb season after season. We dig out the old footing, set the new post deeper with compacted base that resists that clay movement, and regrade the surrounding pad so water doesn’t pool at the base. A typical post replacement in Crowley runs $350 to $900 depending on depth, concrete volume, and whether we’re resetting a swing gate post, a slide gate track post, or a latch post.
Custom Welding
Whether it’s a broken hinge ear on a decorative wrought-iron gate, a cracked rail on a 2000s-era tubular steel panel, or a complete custom fabrication to match an HOA-approved design, our welders handle it in Crowley. We weld on-site for most repairs, which means less downtime and no need to haul a 400-pound gate across town. Custom welding rates in Crowley typically run $95 to $185 per hour plus materials, and we always quote the full price before the first arc is struck.
Hinge Replacement
Here’s the thing most gate companies won’t tell you about Crowley: a hinge that binds in February was probably fine in August. The gate didn’t sag because the hinge wore out. The post moved. That’s why our hinge replacement service starts with checking post plumb and footing integrity. We replace worn hinge pins and barrels, weld on new heavy-duty adjustable hinges when needed, and re-hang the panel so it latches correctly right now and through the next clay cycle. Hinge replacement in Crowley typically runs $180 to $520 depending on gate weight, hinge style, and whether the post needs re-shimming or resetting.
Rail Repair
Ornamental gates take a beating in Crowley. Wind loads across the open prairie push against the panel, and sun-baked steel expands and contracts through 70-degree temperature swings. Rails crack at the welds, sag in the middle, and pull away from the stiles. We cut out the damaged section or weld in reinforcement, match the finish to the existing HOA-approved color, and get the panel square again. Rail repair on a typical Crowley driveway gate runs $225 to $650.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
Your Crowley Gate Motor & Opener should work as reliably as your gate swings. We service and install automation from BFT, Linear, Viking, and Ghost Controls, among others, and we keep common parts for these systems on our trucks. When a Ghost Controls arm fails on a solar-powered swing gate off FM 1187, we don’t want to make a second trip just for a part. We carry what the job needs, and when we don’t, we know the local suppliers who do. Most Crowley gate welding and hardware jobs are done in a single visit.
Common Gate Parts & Welding Problems We See in Crowley Homes
- Heaving posts each winter. Clay contracts as it dries after fall rains stop, the ground drops a fraction of an inch, and the gate’s latch side drops with it. Your gate that closed fine in October is scraping the driveway by January. Resetting the post is the real fix. Adjusting the hinge is a temporary one.
- Cracked welds after sudden freezes. The February 2021 ice storm did a number on ornamental gates across Crowley. Steel that was never stress-relieved for rapid 50-degree temperature drops develops hairline cracks at welded joints. We see those cracks open up most often on the top rail corners and at the hinge attachment plates.
- Slide gate rollers binding on the track. When rain-saturated clay swells, it pushes upward on the track’s mounting posts. The rack and pinion alignment shifts, and the gate starts grinding instead of gliding. Fixing it means realigning the track posts and often resetting one or both of them deeper than the original install.
- HOA finish matching. Your neighborhood approved a specific black powder-coat finish, and a botched weld touch-up with spray paint won’t pass the next architectural review. We match finishes properly, including heat-tolerant coatings that won’t discolor after the first Texas summer.
Pricing for Gate Parts & Welding in Crowley, TX
Here’s what you can expect in the 76036 area. Hinge replacement runs $180 to $520. Post replacement runs $350 to $900 for a typical 4-by-4 or 6-by-6 steel post with new concrete footing. Custom welding runs $95 to $185 per hour plus materials, with most repair jobs falling between $250 and $700 total. Rail repair runs $225 to $650. Latch and lock replacement runs $140 to $380. If you’re in a Crowley HOA community and need finish matching to spec, add $40 to $120 for custom color matching. Every quote is written, itemized, and agreed to before we start. No surprises on the bill. Call (817) 961-9404 for a free estimate, and ask about $50 off any repair over $250.
We Also Serve Cities Near Crowley
While this page focuses on Crowley, our crews regularly work in Crowley and the surrounding communities of Burleson, Joshua, Kennedale, and Keene. If you’re just outside the Crowley city limits, call us anyway. We likely cover your street.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Crowley
Yes, in most Crowley communities with an HOA or architectural review committee, you need written approval before changing gate style, height, finish color, or sometimes even hinge hardware. The answer your management company will give is usually governed by your community’s architectural standards, which apply to driveway gates just as much as to fencing or exterior paint. We help you fill out the application, supply drawings and material specs when required, and coordinate with your property manager before any cutting or welding starts. If your HOA denies a proposed change, don’t take it personally. We can usually adjust the design to get it approved. Call (817) 961-9404 if you want help with the process.
Your post has moved. It’s not the hinge or the latch. Crowley sits on Blackland Prairie clay that swells when it rains and contracts dramatically when it dries out over winter. That seasonal movement heaves the post out of plumb, and an inch of drop at the latch side means the gate tongue misses the strike plate entirely. The short-term fix is adjusting the hinge, but the real fix in Crowley is resetting the post on a deeper, better-drained footing and then re-hanging the gate. Call us for an exact assessment – estimates are free.
Yes. We weld the ear back onto the gate frame, grind the repair smooth, and then touch up the finish with a heat-tolerant coating matched to your HOA’s approved black. The weld itself will be stronger than the original casting if we add a small gusset plate behind the ear, which we do on gates that carry real weight. This is standard work for us in Crowley, and we’ve done it on gates in Deer Creek and throughout 76036. Call (817) 961-9404 and we’ll quote it before we touch anything.
It’s usually an Gate Access Control - Crowley issue, not a welding issue. The gate frame and hinges are unlikely to be the problem if the gate opens and closes smoothly for other vehicles. The issue is more likely your vehicle’s magnetic signature not triggering the loop detector, a keypad code that got deleted from the system, or a transmitter that stopped sending. But before you call an access control company, check one thing: does the gate lag or bind slightly when your neighbor’s car triggers it? If it does, that’s a hardware issue, and we should inspect the rollers and track. We trouble shoot both sides of that problem in Crowley, so call (817) 961-9404 and we’ll figure out which one you have.
Yes, we work directly with HOA boards and property management companies in Crowley on shared entry gates, perimeter gates, and amenity area gates. We handle the written quote, the architectural approval paperwork, the scheduling, and the final inspection walkthrough with your management team. Victor Salinas has been coordinating jobs like this for years, and our 90-Day Done Right Promise applies to HOA work exactly as it does to a single-family driveway gate. Call (817) 961-9404 and ask for our HOA and property management services.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crowley’s gate parts and welding needs with care and precision.