Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Joshua
When a gate post leans, a hinge tears loose, or a weld cracks on a Joshua property, the fix usually comes down to two things: the right part and a footing that will actually hold in Johnson County clay. Our Gate Parts & Welding crew handles both. We weld on site, we stock the hinges, rollers, latches, and brackets that fail most often out here, and we get to your gate quickly when it will not close or will not open. Call (817) 961-9404 and a live person answers, day or night.
Why Ironworks Gate Co. Is Joshua’s Preferred Gate Parts & Welding Company
Joshua is not a one-size-fits-all gate market. The older ranchette lots along County Road 913 and the streets branching off FM 917 carry a different set of gate problems than the newer subdivisions off of Ranch Road and the HOA entries near Joshua High School. We have welded pipe gates on horseback properties, re-hung ornamental iron driveway gates in 2000s-era neighborhoods, and rebuilt the hardware on just about everything in between. Homeowners around Joshua call us because we show up with the right steel, the right brackets, and a written quote before any work begins.
Every technician who works in Joshua is background-checked and uniformed. Every job, from a single latch replacement to a full post reset, is covered by our 90-Day Done Right Promise. If it is not right, we come back and fix it. No paperwork, no arguing. That is the Keystone Standard, and it applies to every weld we strike and every hinge we hang in Joshua.
Our Gate Parts & Welding Services in Joshua
Hinge Replacement
Hinge failure on Joshua gates rarely starts with the hinge itself. It starts in the soil. The Blackland Prairie clay under your post swells in spring, the post moves, and suddenly the hinge carries a load it was never meant to hold. We replace the hinge, yes, but we also reset the geometry so the new hinge is not fighting the same lean. Typical hinge replacement in Joshua runs $120 to $260 per hinge depending on whether we are welding new bracket plates or bolting into existing steel.
Post Replacement
This is the job we do most often on the ranchette properties east and south of downtown Joshua. An old agricultural gate post, set twenty or thirty years ago at eighteen inches deep, cannot hold a modern opener arm. The clay shifts, the post cants inward, and the motor burns itself out trying to push against a binding arm. We pull the old post, set a new one at the proper depth with the right concrete footing for Johnson County soil, and weld the hinge brackets square. Post replacement in Joshua typically runs $350 to $700 depending on post size, depth, and whether we are also relocating the operator mount.
Rail Repair
A bent top rail or a sagging bottom rail on a pipe gate is usually the result of wind load or a livestock push. Solid infill gates on exposed acreage catch north Texas wind like a sail, and the torque bends steel over time. We straighten what can be straightened, cut and weld new sections where it cannot, and reinforce the corners so the same wind does not re-bend the frame next season. Rail repair work in Joshua usually falls between $180 and $400 depending on how much steel we are replacing.
Custom Welding
Not every gate problem has an off-the-shelf fix. When a hinge point is wallowed out, when a latch does not line up with the post, or when you need a bracket fabricated for a Ghost Controls arm on an odd post size, we weld it on site. Our welders have been doing this work for decades, and they know the difference between a weld that holds for a season and one that holds for forty years. Custom welding jobs in Joshua start around $150 for a small bracket or latch plate and scale with the size of the fabrication.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Joshua
When a storm knocks out power or a control board fries, the brand on your opener matters. We service and stock parts for LiftMaster, BFT, Linear, Viking, and Ghost Controls openers, among others. That means when your solar Viking arm stops cycling after a rain, or a BFT board fails after an ice event, we usually have the replacement part on the truck the first visit. For Joshua homeowners with acreage gates running on solar Ghost Controls or Linear operators, that local parts availability cuts the wait from weeks to a day or two.
Common Gate Parts & Welding Problems We See in Joshua Homes
- Clay soil saturation in spring causes under-depth gate posts to cant forward. The Blackland Prairie expands and contracts dramatically between droughts and wet seasons. Posts set shallow, often from the original agricultural installation, lean into the gate path and bind swing arms. This strips hinge welds and burns out motors in a pattern we do not see in rockier or sandier counties.
- Solid infill gates on exposed acreage torque hinge posts in high wind. North Texas thunderstorm fronts push against flat steel faces. Over time the lag bolts pull loose from wood posts, or the weld at the post base cracks. Homeowners off of FM 1902 and the open ranch roads south of town deal with this more than anyone in a sheltered subdivision.
- Ice storms bend tubular steel frames and crack control boards. February 2021 was the worst we have seen, but every few years a Joshua ice event does real damage. Water gets into the frame, freezes, and splits the tube. Control boards short when power flickers and surges. We straighten and weld the frames, and we rebuild the electronics.
- Mismatched hardware from the agricultural-to-residential transition. Joshua’s older ranchette properties were built for manual gates. Now they carry LiftMaster and Ghost Controls arms bolted to posts that were never poured deep enough. The hardware fights the soil, and the motor loses every time.
Pricing for Gate Parts & Welding in Joshua, TX
| Service | Typical Range in Joshua |
|---|---|
| Hinge replacement (per hinge) | $120 - $260 |
| Post replacement (single gate post) | $350 - $700 |
| Rail repair / straightening | $180 - $400 |
| Custom welding (small bracket or latch plate) | $150 - $350 |
| Full custom welding / major frame rebuild | $500 - $1,200 |
These are the ranges we see most often in Joshua. What changes the number is the condition of the post footing, the thickness of the steel, and whether we are repairing or replacing. We quote the job before we start, we write the price down, and we do not add a dollar to the bill unless you approve it first. Estimates are free. Call (817) 961-9404 and we will come out, look at the gate, and hand you a written price.
We Also Serve Cities Near Joshua
Our Gate Parts & Welding in Joshua team also runs calls to Keene, Burleson, Crowley, and Cleburne throughout the week. The soil and the gate stock are similar across northern Johnson County, so the same failure patterns show up, and the same fixes apply. If you are outside Joshua proper, we can still get a crew to you quickly.
Serving Joshua, TX - Our Local Coverage Area
We’re based in the Joshua area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Joshua
Most swing gate openers in Joshua have a manual release, usually a keyed lock or a pull lever on the operator housing. Turn the opener off at its switch first, then use the release to disengage the motor from the arm. Do not force the gate by hand with the motor still engaged. You can push the gate to open or close it manually. If you cannot find the release or the arm is binding, call us at (817) 961-9404. We can walk you through it over the phone or come out the same day after severe weather.
The clay soil in Joshua expands when saturated and contracts in drought, and that movement pushes shallow posts out of plumb. Most of the leaning gates we see were set at eighteen to twenty-four inches deep decades ago, which is not enough for Johnson County ground. A proper fix means pulling the post, digging to at least thirty-six inches, pouring a wider footing, and sometimes adding a horizontal brace between posts. We also match the post depth to the gate weight and the opener type. Call us and we will tell you exactly what is under your gate and what it will take to stop the cycle.
Yes. We straighten and weld bent tubular and angle-iron frames on ranch and acreage gates every season in Joshua. If the steel is kinked beyond straightening, we cut out the damaged section and weld in a new sleeve or replacement tube. We also check the hinge geometry and the post footing while we are there, because a wind-bent frame often means the post moved too. After the weld is done, we test the full swing and make sure the opener, if there is one, cycles smoothly. Call (817) 961-9404 for a free repair estimate.
It is common enough. Cloud cover the day before, morning dew, and a low sun angle all reduce the charge a solar panel can deliver. In Joshua, spring thunderstorms followed by overcast mornings can leave a solar opener running low. The fix is usually a larger panel, a battery replacement, or both. We service solar openers from Ghost Controls, Viking, and Linear, and we can test the battery draw and panel output on site. Call (817) 961-9404 and we will tell you exactly what your system needs.
We pull the old post and set a new steel post at a minimum of thirty-six inches deep, with a concrete footing at least twelve inches wide. For a LiftMaster arm on a heavy gate, we often go deeper and wider. The old agricultural posts were set for manual swing, not for the constant push of an operator arm, and the Joshua clay will move a shallow post within a few seasons. We set the new post plumb, weld the hinge brackets square, and remount the opener so the arm travels without binding. The right fix ends the motor-burning cycle for good.
If your gate is leaning, binding, or torn loose at the hinge, call (817) 961-9404. We will come to your property in Joshua, look at the gate, and give you a written price before any work starts. Free estimates, live answers, and a 90-Day Done Right Promise on every job.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Joshua and Johnson County with gate repair, welding, and automation for over 42 years.