Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Keene
Gate hardware fails in Keene for reasons most out-of-town shops never figure out. Hinge welds crack on 50-year-old tubular steel. Posts heave in the clay and throw everything out of line. The fix is rarely as simple as bolting on a new part. That’s why we stock replacement hinges, rollers, latches, and welded components sized for the gates actually built in this town, and why our crews know the difference between a worn bearing and a post that has shifted two inches in the Blackland Prairie soil. If your gate drags, droops, or won’t latch, call us at (817) 961-9404 for a straight answer and a free estimate.
Key Takeaways:
- Same-week scheduling for Keene gate repairs; Sunday service available and expected here
- We weld, replace posts, and repair rails on gates built from the 1950s through today
- Free estimates with a written price before any work begins
- 90-Day Done Right Promise, in writing, on every job
Why Ironworks Gate Co. Is Keene’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has spent 42 years doing gate work across Johnson County, and Keene is its own animal. The housing stock is older and more consistent than what you see in Burleson or Cleburne, with a dense core of 1950s-to-1980s homes built around Southwestern Adventist University. Those houses came with real steel gates, not the lightweight aluminum panels you see on the newer infill lots at the town’s edges. We know which era your gate came from, how its hardware was originally hung, and what it takes to keep it working without tearing out half the fence.
Victor Salinas leads our team with one rule: the gate works, or we come back. That’s not a vague promise. It’s a written 90-Day Done Right Promise on every parts and welding job we complete in Keene. If a hinge weld cracks or a replacement post shifts, we return and make it right. No paperwork chase, no arguing.
Call us at (817) 961-9404 and you’ll reach a live person, not a voicemail tree. We schedule work around your week, including Sunday service for Keene households that observe Saturday Sabbath. That’s a detail we learned fast, and it matters more than most people realize.
Our Gate Parts & Welding Services in Keene
Hinge Replacement
Hinges on Keene’s older iron and tubular steel gates take a beating from clay-heave cycles. As the ground swells and shrinks, the post tilts and the hinge carries load it was never designed for. Weld-on barrel hinges and strap hinges are our standard replacement, cut to match the original swing geometry so the gate hangs square and closes without dragging. We can also convert worn pin hinges to greaseable bearings if the gate sees heavy daily use.
Post Replacement
This is the repair that separates gate specialists from handymen. A gate post in Keene’s Vertisol clay needs more than a new bag of Quikrete. Our crew digs out the old footing, re-plumbs the post, and sets it in concrete with a wider footing than the original, which gives the clay room to move without taking the post with it. On a 1970s swing gate near the university, we reset a hinge post that had heaved nearly an inch out of true and replaced the worn FAAC rack and pinion in the same visit. The gate has closed square through two season changes since.
Rail Repair
Bottom rails on older steel gates collect water and rot from the inside, while top rails bow under years of sag. We cut out the failed section, weld in matched steel, and reinforce stress points where the original fabricator left a weak weld. The finished repair gets primed and painted to match closely enough that the patch disappears into the gate. For Keene homeowners who plan to stay in their homes another twenty years, this is the repair that returns real service life, not a one-season bandage.
Custom Welding
Some jobs call for a part that was never stocked by anyone. We fabricate custom hinge plates, latch brackets, gate extension panels, and steel stiffeners in-house. If you have an older gate that needs a structural change to accept a modern operator or a new latch position, our welding bench in the field truck is set up for clean MIG work on the spot. Victor has built and repaired enough gates that he can tell you within minutes whether a weld repair or a full replacement makes better financial sense. We’ll give you the honest answer, even when it means a smaller job for us.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keene
Keene driveways carry a mix of old and new automation gear. We regularly service and source parts for BFT, Linear, Viking, and Ghost Controls operators, plus the legacy FAAC units still running on many of the original Adventist-built homes. When your control board fails or your safety photocells stop passing their self-test, the first step is identifying whether parts for that generation are still manufactured. For newer BFT and Linear models, we stock common boards and switches for same-week replacement in Keene. For obsolete Viking or Ghost Controls units, we’ll find a compatible retrofit or tell you straight if the whole operator should be replaced. No guesswork, no three-week parts roulette.
For a full look at what we handle, see our Gate Parts & Welding service page.
Common Gate Parts & Welding Problems We See in Keene Homes
- Swing gates that drag or bind every season change. Keene’s Vertisol clay swells in wet winters and cracks in summer drought. The hinge post tilts a fraction of an inch, and the latch strike no longer lines up. If all we do is re-hang the gate, you’ll call us back in six months. We reset the post properly instead.
- Corroded hinge welds on 40-to-60-year-old steel gates. The original welds on many tubular steel gates near Southwestern Adventist University are now rust-through failures. Grinding out the old weld and laying fresh steel is often the last payment for another decade of use.
- Bent panels on lightweight aluminum slide gates after spring wind storms. 60-to-80 mph straight-line winds do real damage to gates engineered down to a price. We reinforce bent frames and re-hang panels, then advise whether the gate or its track was matched to the wind load in the first place.
- Obsolete control boards and dead safety photocells on legacy operators. Older automatic gates in Keene sometimes fail modern UL 325 entrapment protection checks. A worn board might still open the gate, but the safety circuit is shot. We’ll tell you what you have, what it needs, and what replacement costs before touching a single wire.
Pricing for Gate Parts & Welding in Keene, TX
We quote every job before any work begins, and the price we agree on is the price you pay. No open-ended time-and-materials surprises. Here’s what Keene homeowners can expect:
| Service | Typical Range in Keene |
|---|---|
| Hinge replacement (weld-on steel = 2 hinges) | $190-$380 |
| Post replacement with wider concrete footing | $420-$850 |
| Rail repair (cut out and weld new steel section) | $280-$550 |
| Custom welding (latch brackets, stiffeners, extensions) | $150-$450 |
| Seasonal tune-up (lube, alignment, safety check) | $89 |
Costs climb when a post reset requires saw-cutting through an old concrete walkway, or when a gate needs hoisting and re-plumbing in the same visit. Estimates are free, and our standing offer applies: $50 off any repair over $250, and a free second opinion on any written estimate from another company. A 5% discount extends to senior and veteran households, always.
We Also Serve Cities Near Keene
Ironworks Gate Co. runs regular routes through Keene and the surrounding Johnson County communities. You’ll find us working in Cleburne, where the housing stock shares Keene’s clay-soil realities; in Joshua and Alvarado, where ranch gates and suburban swing gates meet; and in Burleson, where we service everything from 1970s steel to new operator retrofits. Same crew, same written promise, same 24/7 phone answer.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Keene
Your hinge post is moving with the ground. Keene’s Blackland Prairie Vertisol clay swells in wet winters and shrinks in summer drought, tilting buried posts and throwing your latch strike out of alignment. The permanent fix is to reset the post in a wider concrete footing that resists the clay’s seasonal movement. We handle post replacement in Keene as standard repair work, not an upsell. Call (817) 961-9404 for a free inspection - we’ll tell you whether your post is actually moving or whether the gate just needs an alignment tune-up.
Most 1980s tubular steel gates in Keene are worth retrofitting. The steel is generally heavier than anything made today, and the gate has survived four decades of clay heave, which counts for something. If the hinge welds are sound and the gate swings square after a post check, we can mount a new operator and safety edges without replacing the gate. If the rail is rusted through or the post footings are failed, replacement is the cheaper long-run answer. We’ll tell you which one applies to your gate, honestly, before you spend anything.
Aluminum can be welded, but thin extruded aluminum slide-gate panels rarely take a repair that lasts. We will evaluate the frame. If the bend is in a steel-reinforced spine, we’ll straighten and weld it. If the panel itself is creased, you are usually better served replacing that panel or upgrading to a wind-rated gate. We do not recommend welding thin aluminum panels on Keene’s windy edge lots; the first 70 mph gust will find the weak spot again. Call (817) 961-9404 and Victor will give you a straight read on it.
Yes, we do. Keene’s Seventh-day Adventist community observes Saturday Sabbath, and we respect that. Sunday is our standard service day for Keene households that cannot take Saturday work. We schedule around your household’s calendar, and our dispatch team is familiar with the pattern. If you need a gate job done Sunday, it is not an afterthought here.
Modern automatic gates must meet UL 325 standards for entrapment protection, which means working safety photocells and a reversing mechanism that responds properly to obstruction. If your gate was installed in the 1990s or early 2000s and has never had a safety circuit replacement, it is worth checking. We test safety edges and photocells as part of our $89 Seasonal Tune-Up, and we will show you exactly what passes and what does not. Call (817) 961-9404 to schedule; the safety check is quick and the results are easy to understand.
Schedule a Gate Parts or Welding Repair in Keene
If your gate drags, won’t latch, or needs a weld that will outlast the next clay heave cycle, we’re the crew to call. Ironworks Gate Co. has been doing this work for over 42 years, and Victor Salinas still answers the phone. You’ll get a written price before any work starts, a 90-Day Done Right Promise on the finished job, and a gate that works the way it should. Call (817) 961-9404 for a free estimate. We’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keene since 1984.