Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Repair in Keene, TX | Ironworks Gate Co.
We handle Keene Gate Repair for DoorKing operators, and we get there fast when a gate stops closing. The one thing that makes our DoorKing work different here is simple: we know Saturday service calls don’t work in this town, so we run our Keene queue on Sunday when the Sabbath observance ends. That’s local knowledge you won’t find on a generic DoorKing page.
Our techs have torn down and rebuilt DoorKing 9150s, 9050s, 6300s, and 1603s for over two decades in North Texas clay. We’re an independent service provider, not manufacturer-affiliated or authorized, which means we answer to you, not to a corporate warranty department. Call (817) 961-9404 and a live person picks up, 24 hours a day.
Why Keene Residents Choose Us for DoorKing Service
Victor Salinas grew up in Cleburne and spent decades working metal and motors across Johnson County. He learned welding and electrical systems hands-on at Hill College in Hillsboro, and that grounding shows in how we approach every DoorKing repair in Keene, whether it’s a 40-year-old swing gate on a 1960s ranch house or a newer 9150 slide operator on the edge of town.
We carry OEM DoorKing boards, capacitors, and lock kits in the truck because matched tolerances matter. Keene’s clay soil punishes equipment, and the difference between a gate that works and a gate that binds often comes down to a part that fits exactly right. We’ll also run a quality aftermarket gear or battery when it outlasts factory spec and you want the gate up tomorrow. Our techs are background-checked, uniformed, and guided by a simple code: Krafted right, Every time, Your home first, Standing behind it. Every job carries a written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Common DoorKing Gate Repair Problems We Solve in Keene
- Cooked start capacitors in 115V slide operators. Keene’s grid brownouts hit DoorKing 9150s and 9050s hard. The capacitor fails, the gate creeps half-open, and the auto-close sensor trips. We stock replacements and can usually have the gate cycling correctly the same visit.
- Sheared swing-arm bolts on 6300 operators. Vertisol clay swells in wet winters and cracks in summer drought. When a gate post shifts, the 6300’s steel mounting bolts shear clean off. We drill and re-tap them to a heavier grade-8 spec so it doesn’t happen again next season.
- Limit switch failures from wind-blown debris. Keene’s 60-80 mph straight-line winds fill the 9050’s limit switch bracket with dust and dead grass. The gate slams into the end stop and the motor brake burns out. We clean, calibrate, and replace the switch before the motor pays the price.
- DoorKing APX keypad failures in wet springs. Without the rubber gasket seated correctly, these keypads die in one or two wet seasons. We pull them, smear dielectric grease on the ribbon cable, and reseat the gasket so the buttons keep working through Johnson County rain.
- Corroded hinge welds on original gates. Many Keene homes near the university still have their 1950s-1980s wrought-iron or tubular steel gates. Deep corrosion at post bases and hinge welds is common. We repair or replace hinges and re-plumb posts rather than telling you to buy a new gate.
DoorKing Service in Keene: What Local Conditions Mean for Your Equipment
Keene sits on Blackland Prairie Vertisol clay that swells in winter and cracks dramatically in summer. A post-drought crack event can shift a buried gate post two inches or more laterally in a single season. For a DoorKing 6300 swing operator, that shift throws the latch strike out of alignment and the gate starts dragging or binding. For a 9150 slide operator, the chain tension changes and the drive sprocket key shears. Technicians who only re-hang the gate without re-plumbing and re-setting the post in concrete with a wider footing get called back within six months. We know this because we’ve fixed those repeat jobs. On College Drive near Southwestern Adventist University, our tech pulled a 9150 where the gate was dragging the chain and groaning after a March rain. The post had leaned a full two inches, sheared the drive sprocket key, and fried the motor’s overload. We re-plumbed the post in a 10-inch footing, replaced the sprocket and key with OEM DoorKing, and that gate has run silent for a year. That’s the repair Keene’s clay demands.
DoorKing Models & Products We Service in Keene
We repair the full DoorKing lineup found on Keene driveways and estate entrances. The 9150 and 9050 slide gate operators are common on larger lots, the 6300 swing gate operator appears throughout the older residential core near the university, and the 1603 barrier gate operator shows up at small private drives and community entrances. We keep OEM DoorKing boards, capacitors, and lock kits stocked locally so most Keene jobs don’t wait on shipping. When a part is backordered, we’ll tell you straight and offer an aftermarket option with a realistic lifespan estimate. We’re also the shop for DoorKing sales & service, from new operator installations to full gate replacements, hinges, motors, and intercom integration.
DoorKing Service Pricing in Keene
DoorKing gate repair in Keene typically runs $180-$340 for most mechanical and electrical fixes, including labor and standard parts. A replacement circuit board can push a job higher, while a simple limit switch adjustment or keypad repair lands on the low end. We quote the price and agree on it before any work starts, so you won’t see a larger invoice than the number you approved. Estimates are free, and we offer a free second opinion on any written estimate from another company. Senior and veteran customers always receive a 5% discount. Call (817) 961-9404 for an exact quote on your DoorKing repair in Keene, and ask about our $50 off any repair over $250.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - DoorKing Gate Repair in Keene
Yes. We repair shifted-post 9150s regularly. The fix means re-plumbing the post in a wider concrete footing, then replacing any sheared drive components like the sprocket key or chain. A basic re-hang without the post work will fail within six months in Keene’s Vertisol clay. Call (817) 961-9404 and we’ll assess the post, the operator, and the full gate before quoting.
That reversal usually tracks to a limit switch bracket packed with storm-blown dust and grass, or a misaligned photo eye knocked loose by high wind. The gate’s safety circuit triggers the reverse. We clean and recalibrate the limit switch, re-aim the photo eyes, and test the auto-close function before we leave.
Yes. Keene’s Seventh-day Adventist community observes Saturday as Sabbath, which means our Saturday callback rate here is effectively zero and our Sunday service queue is triple any other Johnson County zip code. We schedule Keene DoorKing repairs for Sunday and weekday slots, and emergency calls are answered 24/7. Call (817) 961-9404 on a Sunday and you’ll get a live person.
It can be. Keene’s grid brownouts and spring storms are hard on 115V DoorKing operators, especially when the start capacitor is already weak. But we also check the swing arm for binding against a shifted post, which makes the motor draw more current and blow fuses. We’ll test both before recommending a fix.
We stock common 1603 parts like boards, capacitors, and lock kits locally for fast Keene turnaround. If your barrier gate needs something unusual, we’ll tell you the shipping timeline honestly and offer an aftermarket option if it makes sense. Most 1603 repairs in Keene are completed in one visit.
Service Areas Near Keene
We run DoorKing service calls throughout Johnson County from our home base. That includes Keene service area neighborhoods near Southwestern Adventist University, plus DoorKing service in Cleburne, DoorKing service in Itasca, Joshua, Alvarado, and Crowley. Same-day service is available in most cases when you call before noon.
Book Your DoorKing Service in Keene Today
If your DoorKing gate has stopped closing, dragging, groaning, or blowing fuses, call (817) 961-9404. We’ll get a tech out, quote the price before we touch a bolt, and stand behind the work in writing. If it swings, rolls, or latches, we can sort it out.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keene since 1984.