Gate Parts & Welding in Burleson - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across Burleson

A sagging farm gate off a county road in 76097 or an HOA ornamental iron gate that won’t close in 76028 both come down to the same thing: the metal has to be right, and the parts have to match. In Burleson, gate repair usually means one of three problems. The hinges gave out. The post moved. Or the weld finally cracked after fifteen years of Johnson County clay pushing against it. We fix all three. Ironworks Gate Co. sends background-checked, uniformed technicians to Burleson with the welding gear and parts stock already on the truck. Call (817) 961-9404 and a live person answers, 24 hours a day, 7 days a week. No voicemail tree. No waiting until Monday.

Call (817) 961-9404

Most gate parts and welding jobs in Burleson are completed in a single visit. The price is settled before a single bolt is turned, and every job is backed by our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.

Why Ironworks Gate Co. Is Burleson’s Preferred Gate Parts & Welding Company

Burleson sits in a strange spot for gate work. Drive five minutes east on County Road 528 and you’re in a subdivision with ornamental iron driveway gates governed by an HOA that wants every picket to match the original community spec. Drive five minutes west toward Bethesda Road and you’re looking at a pipe-steel farm gate on a solar opener, holding back a pasture. Our Gate Parts & Welding team works both sides of that line every week. That’s not a marketing line. It’s the route sheet.

Victor Salinas leads our crew. He’s spent years working on gates that other companies walked away from, the ones where the post is leaning, the rack is stripped, and the homeowner has been told they need a whole new gate when they actually need three hours of welding and a heavier hinge. We’d rather fix the gate than sell you a new one when a fix is what’s called for. Burleson homeowners tend to stay in their homes for twenty, thirty years. They remember the contractor who tried to upsell them. We’d rather be the company they call twice in a decade than the one they warn their neighbors about.

Response time to Burleson is coordinated from our Dallas-Fort Worth office, with crews dispatched locally. For a sagging hinge or a gate that won’t latch, we can typically get a technician to most Burleson addresses the same day or next day. Emergency calls, like a gate stuck open with horses inside the fence line, get priority routing.

Our Gate Parts & Welding Services in Burleson

This page covers the metal side of gate work: hinges, posts, rails, rollers, latches, and custom welding. If the motor is the problem rather than the metal, that’s handled by our gate opener and automation service. But a surprising number of “opener problems” in Burleson are actually welding problems. The operator burns out because a hinge seized. The gate binds because the post moved. The rack teeth strip because the gate wasn’t hung square to begin with. Fix the metal first, and the motor lives longer.

Hinge Replacement

Most hinge failures in Burleson happen at the weld joint, not the hinge barrel. On pipe-steel farm gates in 76097, the weld-on hinge plate tears away from the post as the gate sags under its own weight. On ornamental iron gates in 76028 subdivisions, the hinge pin simply wears out after ten to fifteen years of daily cycling. We cut out the old hinge, grind the post clean, and weld in a heavier replacement, then re-hang the gate so it swings without dragging. If you’re out past 76097 with a livestock gate, we recommend weld-on heavy-gauge hinges rather than bolt-on hardware. They hold up better against the daily abuse of a gate that opens and closes thirty times a day.

Post Replacement

The single biggest recurring gate problem in Burleson is the post, not the gate. Johnson County’s black-clay soil shrinks in the drought and swells after rain. It’s called expansive clay, and it heaves. A gate post set in a shallow 24-inch footing will move within a few seasons. We see it constantly. Post replacement here means digging out the old footing, going deeper, and setting a new post with a larger concrete collar and rebar. On wide farm gates, we use oversized rebar cages to counter the heave. In 76028 subdivisions, we match the original post cap and finish so the HOA can’t tell the difference.

Rail Repair

Farm tube gates in Burleson take a beating. Livestock lean on them, tractors clip them, and the top rail eventually bends or cracks at the mid-rail weld. We cut out the damaged section, sleeve or splice in new tube steel, and weld it flush. The repair is ground smooth and painted to match. On ornamental iron gates, rail repair usually follows a panel impact, a backing trailer, or a wind storm that torqued the frame. We straighten what can be straightened and replace what can’t.

Custom Welding

Sometimes the right part doesn’t exist because the gate was custom-built in 1987 by someone who’s no longer in business. That’s when the welder comes out. We fabricate replacement hinges, extend gate width, build new gate leaves to match an existing frame, weld in panel sections, reinforce cracked joints, and build mounting plates for solar operator arms. Victor has done custom gate fabrication for rural Burleson properties for years. If it’s steel or iron and it’s attached to a gate, we can weld it.

We also handle gate rollers, latch and lock hardware, and manual gate stops. If the gate doesn’t latch because the ground settled, the fix is usually a new striker plate welded at the right height, not a new gate.

Trusted Brands We Service in Burleson

The operator on your gate doesn’t matter to us the way it matters to a parts counter. We’re trained and equipped on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Burleson acreage in 76097, we see a lot of Viking solar operators and BFT rack-and-pinion slide operators. Linear units are common on production-builder subdivision gates in 76028. We stock or can quickly source parts for all of them, which matters when an HOA gate is down and the neighborhood is lined up behind it.

The parts we weld and replace have to be compatible with the operator. A hinge that’s positioned wrong will bind the operator arm. A rack section that’s not aligned will strip the pinion gear. We do the metal and the motor together, so the whole system works.

Common Gate Parts & Welding Problems We See in Burleson Homes

• Leaning hinge posts on wide farm gates. Burleson’s black-clay soil shrinks in drought and swells after rain, which slowly pushes shallow footings out of plumb. The post leans, the gate sags, and the weld joints at the post-to-hinge connection shear. This is the number one rural gate failure mode in 76097.
• Stripped rack-and-pinion teeth on subdivision slide gates. Production-builder slide gates in 76028 often use plastic rack sections. After ten to fifteen years of HOA-mandated daily cycling, those teeth strip out and the gate starts slipping. Steel rack replacement fixes it before the operator burns out.
• Solar operator failures after cold snaps. After Winter Storm Uri in February 2021, a lot of solar-powered gate openers around rural Burleson lost battery capacity. Now they work fine in the summer sun but fail on cold mornings. We test the battery bank, replace dead cells, and weld in heavier gauge battery trays if needed.
• Cracked weld joints on ornamental iron gates. In 76028 subdivisions, we see hairline cracks at the top hinge weld on ornamental gates. It’s metal fatigue from years of wind load on a tall gate leaf. The gate still works, right up until it doesn’t. We grind out the crack, re-weld, and gusset the joint so it doesn’t come back.

Pricing for Gate Parts & Welding in Burleson, TX

We Also Serve Cities Near Burleson

Our gate parts and welding crews work throughout southern Tarrant and northern Johnson County. If you’re in Crowley, Joshua, Alvarado, or Kennedale, you’re on our route. The same technicians, the same 90-Day Done Right Promise, the same live-answer phone line. We’re proud to be Gate Parts & Welding in Burleson and the surrounding communities.

FAQs - Gate Parts & Welding in Burleson