Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Burleson
Gate motor repair in Burleson typically runs $240-$540 for most operator failures, and we’re usually on site within one business day. If your driveway gate stopped opening, a circuit board, limit switch, or gear is the likely culprit, and we stock parts for the brands most common across 76028 and 76097. Call (817) 961-9404 and a live person answers, day or night. We know Burleson’s gate systems because we work on them every week, not once in a while.
Why Ironworks Gate Co. Is Burleson’s Preferred Gate Motor & Opener Company
Since 1984, Ironworks Gate Co. has held the same line: quote the job honestly, do it correctly, and stand behind it in writing. In Burleson that matters more than most places. Homeowners here remember the last contractor who did not. We hear it on service calls near Chisenhall Fields, off Hidden Creek Parkway, and throughout the 76028 and 76097 ZIPs: the gate worked for a year, then it stopped, and the installer never answered the phone again.
We are the dedicated gate specialist, not a general handyman. That narrow focus means our crews arrive with the right motor, the right board, and the right welding setup on the truck. We service nine opener brands including FAAC, BFT, Linear, Viking, Ghost Controls, LiftMaster and others. And the 90-Day Done Right Promise backs every completed job: if something is not right, we come back and make it right. No paperwork, no argument. Victor Salinas, our owner, put that promise in writing because a guarantee you have to fight for is not a guarantee.
Burleson sits in a specific spot on the map. Dispatch runs from our Dallas-Fort Worth office, and our crews serve Burleson directly, so response times are measured in hours and days, not weeks. A live person answers every call, 24/7. Not a voicemail tree. When a gate motor dies on a Sunday afternoon and your cars are stuck in the driveway, that matters.
Our Gate Motor & Opener Services in Burleson
Most of our work in Burleson falls into four categories. Here is how we approach each one, with the local conditions that shape the job.
Motor Installation
New gate operators in Burleson require more than bolting a motor to a post. In 76028, the HOA architectural committee usually needs to sign off on any replacement, and they often require the new opener and panel finish to match the community’s original spec. On 76097 acreage, the job is different: heavier welded-pipe ranch gates need a motor rated for the panel’s weight, sometimes a slide motor, and hardware that tolerates Johnson County clay movement. We handle the approval paperwork with the management company and install the operator that actually fits the gate, not whatever is on the shelf.
Motor Repair
A failed opener in Burleson usually comes down to one of three things: a burned circuit board, stripped gears, or a limit switch that fell out of adjustment. Production-built subdivisions along the I-35W corridor went up between 2000 and 2020, and hundreds of those original swing-arm operators are now hitting their 10 to 15 year failure window at the same time. We diagnose on the first visit and complete most repairs that same day, because our trucks carry boards, gears, and arms for the brands Burleson homeowners actually have.
Linear Motor
Linear arm operators are common on Burleson’s ornamental iron driveway gates, especially in HOA communities where the arm style was part of the original build spec. When a Linear motor fails, the gate usually stops mid-travel or begins jerking. The arm’s internal screw drive wears over time, and black-clay soil heave accelerates the problem by putting the arm under constant binding pressure. We replace or rebuild the arm and reset the post alignment, so the repair lasts more than a season.
Slide Motor
Slide gates show up more in 76097 and on wider driveway openings in 76028. The failure pattern we see most often in Burleson is a rack and pinion that has drifted out of mesh because the gate posts moved with the soil. The motor is often fine; the alignment is not. We correct the post, rebed the rack, and test the full travel cycle before we leave. If the motor needs replacement, we install a slide operator sized for the gate’s actual weight and length.
We also handle intercom integration for Burleson communities with shared entry systems, and battery backup installation so a gate still opens when the power drops during a North Texas storm. Those are separate discussions, but they start with the same phone call.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
Our technicians are trained and certified on nine opener brands, and the ones we see most in Burleson are FAAC, BFT, Linear, Viking, and Ghost Controls. Because we work this area every week, we know which operators the production builders installed in 76028 and which brands the ranch gates in 76097 run on. We stock boards, arms, gears, and remotes for those systems, so we are not waiting on a distributor in Dallas when your gate is down. If your opener carries a name we did not list, call anyway. We will tell you straight whether we can service it.
Common Gate Motor & Opener Problems We See in Burleson Homes
- Aging production-builder operators failing in waves. The 2000s-era LiftMaster and FAAC swing-arm operators installed across Burleson’s subdivisions are now dying within a few years of each other. If your neighbors have replaced theirs, yours is likely next.
- Hinge post drift from expansive black-clay soil. Johnson County clay swells when wet and shrinks when dry. That cycle slowly pushes gate posts out of plumb, which binds the opener, strips gears, and burns out motors.
- Ice-loading damage from freeze events. Winter Storm Uri in February 2021 damaged operators and low-voltage wiring all over Burleson, and the area remains vulnerable. Ice adds weight to the gate panel, and the motor strains against it until something gives.
- HOA style-match requirements. Many Burleson communities require gate panels, picket spacing, cap styles, and powder-coat colors to match the original community spec. A repair that cannot be color-matched often becomes a custom fab job. We manage that scope before it becomes a surprise.
Pricing for Gate Motor & Opener in Burleson, TX
Here are honest numbers for the Burleson market. Motor repair on a swing gate opener typically runs $240-$540 depending on whether the fault is a board, a gear, or an arm. A full operator replacement with new motor, arms, and remotes usually lands between $1,200 and $2,800, with slide motors on the higher end. Battery backup installation adds roughly $350-$600 to a new install. Intercom integration for shared community gates starts around $800 and goes up based on the number of stations.
What moves the price in Burleson is the gate’s size, the post condition, and whether the HOA requires finish matching or custom fabrication. We quote every job before any work starts. The price we agree on is the price on the bill. No surprises. Estimates are free. Call (817) 961-9404 and we will give you a number you can plan around.
We Also Serve Cities Near Burleson
Our Gate Motor & Opener crews work throughout the southern DFW metro. Along with our Gate Motor & Opener in Burleson service area, we regularly run calls in Crowley, Joshua, Alvarado, and Kennedale. If you are a few miles past the Burleson city limit, call us anyway. We are already in the area.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Burleson
Yes, in most Burleson HOA communities, any exterior change including a gate operator replacement requires architectural committee approval. The committee usually cares about the finish color, the arm style, and sometimes the motor housing placement. We work directly with Burleson HOAs and management companies on this every week, and we handle the submission and paperwork as part of the job. The fastest path is to call us, tell us your community name, and we will tell you what the committee is likely to require. Call (817) 961-9404 and we will start that process today.
The most common post-freeze failure is moisture intrusion into the control board or the low-voltage wiring, not physical ice damage to the gate itself. When ice loaded the panel during Winter Storm Uri, the motor drew extra current, and that surge damaged components that fail days or weeks later. You will not always see the damage. We test the board, the capacitor, and the transformer, then replace only what failed. If your gate acted up after a freeze and has never been fully right, call us for a diagnostic.
Yes. We work with Burleson HOA requirements on finish matching every month, so we know how to source the specific powder-coat color, picket spacing, and cap style your community requires. When an exact color is no longer manufactured, we have the welding and fab capability to produce replacement panels that match the community spec closely enough for architectural approval. This is not a scope item to ignore; it is part of doing the job right in Burleson.
Usually the problem is the hinge post, not the panel. Burleson’s expansive black-clay soil shifts posts over time, which drops the gate and puts the opener under constant strain. A sagging gate will burn out a new motor if the post is not reset first. We check post plumb, hinge wear, and panel weight before recommending any motor work. In many cases we reset the post and rebuild the hinges, and the original motor gets years of added life.
Yes, and we recommend it for any automated gate in Burleson. North Texas storms knock out power more often than homeowners expect, and a gate without backup leaves the driveway unusable until power returns. A battery backup keeps the gate operating through short outages. We install backup systems as a retrofit on existing openers or as part of a new installation, and the cost runs $350-$600. Call (817) 961-9404 and we will spec the right backup for your gate.
Call Ironworks Gate Co. for Gate Motor & Opener Work in Burleson
If your gate motor is dead, struggling, or just making a sound it did not make last month, call (817) 961-9404. A live person answers. We will talk through what you are seeing, give you a straight answer about what it probably costs, and schedule a time that works. Every job is quoted before work begins, every job is backed by the 90-Day Done Right Promise, and every technician working at your home is background-checked and uniformed. Senior and veteran homeowners save 5% on every job, and you can always ask for a free second opinion on any written estimate. Burleson deserves a gate company that will still be here in another 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., founded in 1984.