Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Aledo
When an automatic gate stops responding on a 10-acre property off Old Annetta Road or a custom estate near the Aledo Country Club, you need a technician who understands what those gates actually go through in Parker County. Most gate motor failures in Aledo trace back to two things we see constantly: expansive clay shifting posts out of plumb, and North Texas heat cooking the electronics inside the operator housing. We service every brand your gate was built with, and we carry the parts to fix it right the first visit. Call us at (817) 961-9404 and a live person answers, day or night.
Why Ironworks Gate Co. Is Aledo’s Preferred Gate Motor & Opener Company
Aledo is not a generic suburban market. The gates here run heavier than anything you’ll find in Burleson or Crowley, and they fail differently. We’ve spent 42 years learning the difference. Homeowners across 76008 keep our number because we show up when we say we will, we quote a fixed price before any work starts, and we back every finished job with a written 90-Day Done Right Promise. If it’s not right, we return and make it right. No paperwork. No argument.
Victor Salinas leads our gate automation work, and he’s trained every technician on the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it. That’s why Aledo homeowners with $40,000 ornamental gates let us work on them. The 400th job gets the same care as the first.
Our Gate Motor & Opener Services in Aledo
Gate Motor Installation
A new operator on an Aledo estate gate has to handle a gate leaf that might weigh 800 pounds or more, swing wide enough for a horse trailer, and keep working through July heat and February ice. We size the operator to the gate, not the other way around. Whether it’s a slide motor on a ranch entrance or a linear arm on a wrought-iron swing gate, the installation includes correct post anchoring, proper force settings, and safety photocells wired for entrapment protection.
Gate Motor Repair
Before we replace anything, we diagnose. A gate that won’t move in Aledo is often not a motor failure at all – it’s a shifted post, a corroded wiring harness, or a control board that got baked last summer. We trace the problem to its source, then quote you a fixed price to fix it. On a long drive off Old Annetta Road, our crew arrived to a 20-foot ornamental iron swing gate that wouldn’t budge. The owner assumed a blown motor, but we found the hinge post had heaved over two inches after spring rains, putting the LiftMaster operator arm in a bind. We excavated the post footing, re-set and re-plumbed the post, corrected the sag at the hinge point, and reinstalled the operator with new safety photocells. That gate now swings silent, even during August heat.
Linear Motor and Slide Motor Service
Slide gates are common on Aledo acreages because they handle long, heavy spans well and don’t require the swing clearance a wide driveway demands. Linear motors push those gates along a track, and that track sits right in the path of Parker County’s wet-dry soil cycles. We align tracks, replace rollers, and tune linear operators so the gate doesn’t strain against the ground it sits on. When a slide gate gets stuck in freezing rain, the fix starts with drainage and track heat-trace considerations, not just forcing the motor.
Intercom and Access Integration
Your Gate Motor & Opener is only half of what an Aledo estate gate does for you. The other half is knowing who’s at the driveway before you walk 200 feet to find out. We integrate gate motors with video intercoms, phone apps, and keypad entry systems so you can open the gate from the house or from downtown Fort Worth. If your existing operator is compatible, we can add control without replacing the motor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Aledo
We service and stock parts for BFT, Linear, Viking, and Ghost Controls, among others. That matters when your gate goes down on a Friday afternoon before a holiday weekend. If we don’t have the control board or limit switch on the truck, we can usually have it in hand the same day and get you running. Aledo customers don’t wait a week for a part that a Fort Worth distributor has on the shelf.
Common Gate Motor & Opener Problems We See in Aledo Homes
- Post heave from expansive clay. Aledo’s Parker County soils expand when wet and contract when dry. A gate post can rise several inches in one wet season, throwing the gate out of alignment and bending or shearing the operator arm before you even notice the ground moved.
- Heat-related control board failures. When July pushes past 100°F for two straight weeks, the inside of a metal operator housing can reach 140°F. Circuit boards and wiring harnesses fail intermittently, especially on underground operators at estate entrances.
- Ice storm track freezing and motor burnout. Freezing rain glazes slide gate tracks and keypad wiring. Owners who force a frozen gate open cause rapid cycling, and rapid cycling burns out motors. It’s one of the most preventable failures we see every winter.
- Undersized operators on oversized gates. Many Aledo gates were built for horse trailers and agricultural equipment, but the operator installed with them was sized for a standard suburban gate. A motor that’s too small works harder every cycle and dies years early.
Pricing for Gate Motor & Opener in Aledo, TX
A complete gate motor replacement on a standard Aledo swing gate typically runs $1,400 to $3,200 installed, depending on the gate’s weight, the operator’s duty rating, and whether we’re also correcting post alignment. Slide motor replacement on a ranch entrance runs $1,800 to $3,800. If your gate motor is still viable, repair work is less: a new control board averages $350 to $850, a limit switch replacement averages $180 to $420, and a full safety photocell retrofit averages $250 to $600 per pair.
The price we quote is the price you pay. We agree on it before a single bolt is turned, and we don’t add surprises to the invoice. Call (817) 961-9404 for a free estimate on your Aledo gate motor repair or replacement.
We Also Serve Cities Near Aledo
Our gate motor and opener crews serve Aledo and the surrounding Parker County communities, including Crowley, Joshua, Burleson, and Kennedale. If you’re just outside 76008, call us and we’ll let you know when we can be there. We cover the wider metro area from our Dallas-Fort Worth dispatch office, and our technicians know these roads well. See more about Gate Motor & Opener in Aledo and our local service footprint.
Serving Aledo, TX - Our Local Coverage Area
We’re based in the Aledo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Aledo
If your gate was working fine and then gradually started dragging, binding, or failing to fully close after a wet season, the post is the prime suspect. In Aledo’s expansive clay, posts heave enough to throw the gate out of alignment while the motor still works perfectly. Look for fresh gaps in the soil around the post base or a hinge line that no longer sits level. A quick visual check by a technician confirms it in minutes. Call (817) 961-9404 and we’ll diagnose it on the first visit.
Yes, in most cases we can add video intercom and smartphone control to an existing operator without replacing the motor. We wire the intercom into the operator’s control board and set up the app so you can see and speak to whoever is at the gate, then open it from anywhere. This works especially well on estate properties where the driveway entrance is 200 feet or more from the house. We’ll assess compatibility for free when you call (817) 961-9404.
Freezing rain binds the track and freezes the keypad contacts, and the real damage happens when someone forces the gate to move. The fix is usually a combination of track drainage correction, weather-sealed keypad replacement, and sometimes heat-trace cable along critical track sections. We can also add a manual release protocol so you’re never trapped outside your own gate during a Parker County ice event. Give us a call at (817) 961-9404 and we’ll walk the gate with you.
Plan on a professional alignment check every 12 to 18 months. Aledo’s clay soils move a gate out of plumb faster than almost any other condition we see in the business. A gate that weighs 1,000 pounds and swings off an operator arm needs that arm to travel in a true, unloaded plane. If the post drifts even a few degrees, the motor works harder every cycle. We offer an $89 seasonal tune-up that includes alignment, hinge lubrication, and controller diagnostics. Call (817) 961-9404 to schedule.
Yes. Any automatic gate motor installed in Texas must have functioning entrapment protection: safety photocells, an audible alarm, and correct force settings that reverse the gate if it meets resistance. These are not optional accessories. If your gate was installed before current code standards or you’re not sure the photocells work, we can inspect and retrofit it for safety compliance. Call (817) 961-9404 for a free safety check on your Aledo gate system.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Aledo with gate motor and opener expertise and a written 90-Day Done Right Promise on every job.