Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Cleburne
Gate hinge replacement in Cleburne typically runs $275-$695, post replacement runs $425-$1,150 per post, and custom welding jobs usually land between $180 and $800 depending on the frame damage. Most of our repair calls in Cleburne are done in one visit, and we quote the full price before we strike an arc. Our Gate Parts & Welding team knows what Johnson County clay does to a gate post, and we plan the repair around it. Call (817) 961-9404 and a live person answers, 24 hours a day.
Why Ironworks Gate Co. Is Cleburne’s Preferred Gate Parts & Welding Company
We’ve run enough calls in Cleburne to know the difference between a subdivision lot near Nolan River Road and a 15-acre place off FM 4 where the driveway gate is the only thing between the house and stray cattle. That local reading of the job is why we get called for hinge replacements on pipe swing gates that have been in service longer than most gate companies have been in business. Homeowners in the Westhill and Country Club Road areas, and out toward Sand Flat Road and County Road 1235, call us because we show up when we say and we stand behind the work in writing.
Our welders are the same crew Cleburne calls for rotted post bases, snapped hinge welds, and gates that have shifted out of plumb enough to bind the latch. Every job, from a simple latch replacement in an in-town 1950s bungalow driveway to a full post reset on a working ranch gate, falls under the same 90-Day Done Right Promise. Victor Salinas set the standard for that promise years ago, and it hasn’t changed: if it’s not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Cleburne
Hinge Replacement
Cleburne’s clay-heavy soil holds water against post bases, and the old creosote-treated posts so common on acreage gates eventually rot at the soil line. The gate tilts, the hinge welds pull and snap, and the whole frame drops. We cut out the bad hinge, weld fresh steel plates onto the gate frame, and re-hang it square. A typical Cleburne hinge replacement with steel plate fabrication runs $275-$695.
Post Replacement
When the post itself is rotted or heaved out of plumb, swapping the hinge is a band-aid. We pull the old post, pour a new concrete footing sized for Johnson County soil, set schedule-40 steel posts, and weld the gate back onto them. Post replacement for a standard swing gate in Cleburne runs $425-$1,150 per post, and we keep the driveway passable during the work so you’re never locked in or out.
Rail Repair
Pipe-frame gates take hits from trucks, tractors, and the occasional wayward trailer. Bent or cracked top and bottom rails throw the gate out of square, and a sagged bottom rail drags nothing but dirt and frustration. We straighten what can be straightened, sleeve what can’t, and weld new rail sections where the damage is too deep. Rail repair in Cleburne runs $180-$650 depending on the frame damage.
Custom Welding
Some gates aren’t worth patching, and some lots need a gate built to fit. We fabricate and weld custom swing and slide gates, heavy pipe-frame driveway gates, side-yard pedestrian gates, and horse and cattle gates for Cleburne ranches. A custom welded gate for a typical Cleburne driveway runs $1,400-$4,200 depending on size, steel weight, and hardware. If you have an older gate with a broken frame, we’ll tell you honestly whether a weld repair or a new build is the better spend.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cleburne
We service and stock parts for the opener brands Cleburne actually runs on its acreage gates: BFT, Linear, Viking, and Ghost Controls among them. When a solar operator on a County Road 1235 gate has a cooked circuit board, we carry common replacement boards and photocells on the truck so the gate is running again in the same visit. We don’t make you wait while we figure out what brand is on your post. That’s part of doing Gate Parts & Welding in Cleburne right.
Common Gate Parts & Welding Problems We See in Cleburne Homes
- Hinge post rot at the soil line. Clay-heavy Johnson County soil holds moisture against creosote-treated posts, rotting them from the outside in. The gate tilts, the latch binds, and the bottom hinge weld eventually snaps from the strain.
- Clay heave throwing operators out of alignment. Cleburne’s expansive clay swells through wet cycles and shrinks through dry ones, shifting post footings just enough to knock a BFT or LiftMaster operator out of line. The gate stops mid-travel or reverses unexpectedly, and the fix is re-aligning the operator and re-setting the post.
- Solar opener failures in the summer heat. Cleburne regularly pushes 100°F or more in July and August. Rubbery seals degrade, circuit boards cook, and solar batteries stop holding charge on remote driveways without line power. We see this pattern most on acreage gates outside the city utility line.
- Frozen rack and pinion after an ice storm. North Central Texas ice storms seize slide gate mechanisms and crack seals inside chain drives. The February 2021 storm left a trail of stuck slide gates across Johnson County, and we still get calls each winter when the temperature drops hard.
Pricing for Gate Parts & Welding in Cleburne, TX
| Service | Typical Cleburne Range |
|---|---|
| Hinge replacement (steel plate fabrication) | $275 - $695 |
| Post replacement (per post, concrete footing) | $425 - $1,150 |
| Rail repair (straighten, sleeve, or weld new section) | $180 - $650 |
| Custom welded driveway gate | $1,400 - $4,200 |
| Latch and lock replacement | $95 - $240 |
| Gate roller replacement (slide gates) | $210 - $440 |
Prices above are real ranges from Cleburne work, not ballparks off a national chart. What moves the number: post condition, gate weight and length, how many hinge points need work, and whether the operator needs re-alignment. Every price is quoted and agreed before any work begins, so the bill matches the quote. Call (817) 961-9404 for a free estimate on your gate.
We Also Serve Cities Near Cleburne
Our crew runs daily from the Dallas-Fort Worth office to serve all of Johnson County. If you’re in Keene, Joshua, Alvarado, or Burleson, you get the same 90-Day Done Right Promise and the same live-answer phone line. We know the back roads between them as well as we know FM 4 and Nolan River Road.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Cleburne
Your posts are leaning because Cleburne’s expansive clay soil swells when wet and shrinks when dry, which shifts post footings a fraction of an inch each cycle, and after a few years of that, the post is out of plumb. We reset the post in a deeper concrete footing sized for the clay load, and the lean stops. Call (817) 961-9404 and describe what you’re seeing; we’ll tell you if it’s a post problem or an operator alignment problem before we come out.
Yes. In most Cleburne acreage gates, we weld new steel hinge plates onto the existing gate frame and re-hang it. As long as the gate frame is structurally sound, there’s no reason to scrap a good pipe gate over a snapped hinge. The price for that job typically runs $275-$695, quoted before we touch it.
It is common in Cleburne after hard freezes. Ice expands inside the rack housing and can crack the pinion sleeve or throw the rack out of alignment with the gear. We realign the rack, replace the damaged gear, and check the track and rollers under it. A typical freeze-related slide gate repair in Cleburne runs $285-$700.
We set up a temporary access pattern before we start, so both houses keep using the driveway while we work. Whether it’s a swing gate that needs a hinge replaced or a slide gate that needs rollers, we stage the work around the gate’s cycle so neither neighbor gets locked out. The keypad and safety photocells get checked and re-aligned before we leave. Call (817) 961-9404 and tell us the setup; we’ll walk you through what the repair will look like.
Usually, yes. In Cleburne’s older in-town lots off Granbury Street and Main Street, the gate is often set close to the house with a fence on both sides. We replace the gate frame and hinges in place, or remove just the gate section and leave the fence intact. A standard in-town gate replacement runs $1,200-$2,800, and the fence stays standing. Call (817) 961-9404 for a free measured quote.
Why Cleburne Soil Keeps Our Welders Busy
Here’s the Cleburne-specific fact most gate companies never talk about: the expansive clay under Johnson County doesn’t just move. It holds water. During the wet months, the clay swells and grips the post base. During the dry months, it shrinks and releases. The repeated grip-and-release is what works posts loose and tilts them, and the constant moisture against creosote post bases is what rots them at the soil line. In Burleson or Midlothian, where the soil is sandier and drains better, a hinge post set in 1995 might still be upright. In Cleburne, a post set in 1995 on acreage has usually been reset at least once, and quite often its gate frame has carried snapped hinge welds because of it. We build our post footings deeper and wider here, because we know what the soil does.
Our crew ran a call off County Road 1235 in Cleburne’s rural fringes where a 16-foot schedule-40 steel swing gate had been hung decades ago on creosote-treated wooden hinge posts. The clay-heavy soil had held moisture against the post bases until they rotted at the soil line, tilting the gate enough to bind the latch and finally snap the bottom hinge weld. We cut out the rotted posts, poured new concrete post footings, welded fresh steel hinge plates onto the gate frame, and re-hung it so the keypad entry and safety photocells lined up square again. The driveway stayed passable the whole time.
If your Cleburne gate is leaning, binding, or dragging the ground, call (817) 961-9404. We’ll quote the repair before any work starts, and we’ll stand behind it with the 90-Day Done Right Promise, written and no-hassle.
Written by Victor Salinas, Owner at Ironworks Gate Co., dedicated to gate parts and welding in Cleburne and across Johnson County.