Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Alvarado
Gate parts and welding in Alvarado come down to two things: hinges that hold true in gumbo clay, and welds that outlast Johnson County weather. A typical hinge replacement runs $140-$280 per gate, while custom welding jobs range from $85 for a quick latch repair to $600+ for structural post work. We’re Ironworks Gate Co., and our Gate Parts & Welding team has been fixing and fabricating across Alvarado’s rural acreages and newer subdivisions for over 42 years. When a gate drags, sags, or won’t close at all, call (817) 961-9404 and a live person answers, day or night. We’ll send a background-checked technician in a stocked truck who knows Alvarado’s soil, its farm gates, and its newer automated driveway entrances.
Why Ironworks Gate Co. Is Alvarado’s Preferred Gate Parts & Welding Company
Alvarado isn’t one kind of town, and the gate work here isn’t one kind of job. West of I-35W you’ll find pipe cattle gates hung on cedar posts that have been standing since the 1970s. East toward the newer subdivisions along FM 1807 and County Road 401B, you’ll see ornamental iron driveway gates with solar operators and keypads. We work both, often on the same property.
Victor Salinas leads our crews, and he’s built the company on a simple rule: work on a customer’s gate the way you’d work on your own mother’s. That means clean welds, properly sleeved posts, and no shortcuts under the paint. Alvarado homeowners call us because they’ve lived here long enough to know which contractors disappear after the check clears. We’ve been around since 1984, and we plan to be around for another forty years.
Most Alvarado gate parts jobs are completed in one visit. We carry hinge sets, roller assemblies, latch hardware, and welding equipment on every truck. The price is quoted and agreed before a single bolt is turned, and every job carries our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Our Gate Parts & Welding Services in Alvarado
Here’s what we handle most often across Alvarado, from cattle gates to automated driveway entrances.
Hinge Replacement
Alvarado’s heavy clay soil shifts constantly, and when a post moves, the hinge takes the punishment. We remove worn or seized hinges, weld in heavy-duty replacements sized to the gate’s actual weight, and realign the panel so it swings clean instead of dragging. On a 12-foot pipe gate off County Road 401, that’s the difference between a gate your grandkids can open and one you fight every morning. Hinge replacement in Alvarado typically runs $140-$280 per gate, including materials and on-site welding.
Post Replacement
This is the most recurring repair call in Alvarado, and the reason is the soil. Blackland Prairie clay shrinks in summer droughts, opening cracks you can lose a boot in, then swells after heavy rains. A post set shallow or without proper footings will lean within a single wet-dry season. We dig out the old post, excavate for a properly sized concrete footing or bell-bottom pier, set the new post plumb, and weld or bolt the gate back in place. Post replacement in Alvarado usually runs $380-$750 per post depending on depth, diameter, and whether we’re re-hanging an existing gate or fabricating a new one.
Rail Repair
Wide farm gates take abuse from livestock, wind, and daily use. Horizontal rails crack at the welds, sag in the middle, or pull loose from the hinge post. We cut out the damaged section, weld in fresh steel, and reinforce the corners where the stress concentrates. On ornamental gates, we match the existing profile and finish so the repair disappears. Rail repair in Alvarado runs $120-$400 depending on the extent of the damage and whether repainting is needed.
Custom Welding
Sometimes the part you need doesn’t exist anymore. That’s where our welding shop comes in. We fabricate replacement hinges for old pipe gates, weld broken latch brackets back together, extend gate panels to fit a wider opening, and build custom mounting plates for gate operators on non-standard posts. In newer Alvarado subdivisions, we’ve welded custom brackets for solar panel mounts on arched ornamental gates where the factory bracket didn’t fit. Custom welding is quoted per job, with most Alvarado work falling between $85 and $600.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alvarado
On Alvarado’s acreage properties, we see a lot of Ghost Controls and Viking operators on solar-powered swing gates, along with BFT and Linear units on the newer ornamental driveway systems. Our technicians are trained and equipped on nine major operator brands, and we keep common parts stocked locally so a service call doesn’t turn into a two-week wait for a backordered gear set. When a Linear operator strips a plastic gear on a 16-foot farm gate, we replace it with the correct part and adjust the system so it doesn’t happen again in eighteen months.
Common Gate Parts & Welding Problems We See in Alvarado Homes
- Expansive clay heaving tilts hinge posts. Alvarado’s black gumbo soil cycles through shrink and swell every year, and posts without proper footings lean just enough to bind the gate against the latch post. In our experience, most “broken hinges” are actually post problems.
- Wide farm gates overload residential-grade operators. A 14 or 16-foot pipe gate is a lot of mass, and lighter residential operators from brands like Linear or LiftMaster strip gears quickly under that load. We recommend and install heavy-duty operators rated for the gate’s actual weight and cycle frequency.
- Solar swing gates stuck mid-travel in winter. Alvarado’s cloudy stretches from December through February drain solar batteries on rural gates where running mains power to the driveway isn’t practical. We replace failing batteries, verify panel output, and adjust the operator’s limits so the gate never parks itself half-open.
- Livestock-damaged latches and hinges. On the cattle and horse properties that surround Alvarado, gates get pushed, leaned on, and occasionally charged. Bent latch bars and stretched hinge pins are routine. We weld in heavier hardware that holds up to the pressure.
Pricing for Gate Parts & Welding in Alvarado, TX
Here’s what you can expect to pay for common gate parts and welding work in Alvarado:
- Hinge replacement: $140-$280 per gate, parts and welding included
- Post replacement: $380-$750 per post, depending on depth and diameter
- Rail repair: $120-$400, depending on extent of damage
- Custom welding: $85-$600, quoted per job before we start
- Gate roller and track replacement: $180-$350 for sliding gate systems
- Latch and lock replacement: $90-$220, including alignment and adjustment
The price we quote is the price you pay. Every job is priced and agreed before we start, and senior and veteran customers always get 5% off. For repairs over $250, there’s a $50 discount available. Estimates are free, and we’ll give you a written price on the spot. Call (817) 961-9404 to schedule.
We Also Serve Cities Near Alvarado
While this page focuses on Alvarado, our crews regularly work in Keene, Burleson, Cleburne, and Mansfield. If your property sits between towns or you have family in a neighboring city who needs gate work, we can handle it on the same trip. Dispatch is coordinated from our Dallas-Fort Worth metro office, with crews serving Alvarado locally.
Serving Alvarado, TX - Our Local Coverage Area
We’re based in the Alvarado area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Alvarado
Alvarado sits directly on the Blackland Prairie’s expansive clay, called black gumbo locally. This soil shrinks dramatically in summer drought, opening deep cracks, then swells after heavy rain. The movement pushes posts out of plumb within a single season. The sandier ground west toward Cleburne doesn’t hold water the same way, so posts there stay truer. Here, posts need deeper footings, and we set them with that soil movement in mind. If your post is leaning, call (817) 961-9404 for a free assessment.
Yes. We do this regularly on the cattle and horse properties around Alvarado. We cut away the bent hinge and latch hardware, fabricate heavier-duty replacements, and weld them on with proper penetration. If the post itself has moved, we’ll address that in the same visit. Call (817) 961-9404 and we’ll schedule a time to look at the gate.
We service all nine major operator brands, including the ones we see most on Alvarado solar gates: Ghost Controls, Viking, BFT, and Linear. That covers battery replacement, panel and regulator testing, limit switch adjustment, and gear drive repair. If your solar gate stopped responding, call (817) 961-9404 for a service appointment.
Usually it’s hinge work with a post correction. A sagging 14-foot pipe gate typically means the hinge post has leaned under the load, pulling the hinges out of alignment. We reset the post, replace the hinges with heavier units, and realign the latch. Most jobs run $250-$600 and are done in one visit. Call (817) 961-9404 for an exact quote with a written price before any work begins.
We do, and often on the same property. On a rural acreage off County Road 401, we recently reset a leaning hinge post for a decades-old pipe cattle gate hung on a cedar post, welded in new heavy-duty hinges, and then serviced a solar-powered swing gate with a Ghost Controls operator fifty feet away at the paved driveway apron. Every truck carries both welding gear and gate operator remotes. If your property has both, one visit covers it. Call (817) 961-9404 to schedule.
Contact Ironworks Gate Co. in Alvarado
If your gate needs hinge work, post resetting, custom welding, or a new latch, call us at (817) 961-9404. A live person answers 24 hours a day, seven days a week. We’ll schedule a free estimate, give you a written price before any work starts, and stand behind the job with our 90-Day Done Right Promise. Victor Salinas and the team have been doing this work for over 42 years, and we intend to keep doing it in Alvarado for a long time.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Alvarado and Johnson County communities.