Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Crowley
Gate repair in Crowley usually runs $180 to $520 for common fixes like hinge replacement and realignment, while full electric gate operator replacements run $900 to $2,400 depending on the brand and gate weight. Most repairs in Crowley are completed in one visit, and the price is always quoted and agreed before any work starts. If your gate is dragging, sagging, or stuck, call (817) 961-9404 and a live person answers, day or night.
Crowley’s Blackland Prairie clay doesn’t hold still. It swells after spring rain and cracks open in August, and that movement is what tilts hinge posts, throws gates out of plumb, and makes an opener strain until it burns out. Our crews work these drives every week: subdivision gates off Crowley Road, acreage entrances off FM 1187, and the older ornamental steel gates common to the town’s HOAs. We know this ground, and we know what it does to a gate.
Why Ironworks Gate Co. Is Crowley’s Preferred Gate Repair Company
Ironworks Gate Co. has specialized exclusively in driveway and estate gates for over 42 years, founded in 1984. Homeowners in Crowley call us because the gate is the first thing they open in the morning and the last thing they close at night, and they want it working without argument or delay. Led by Victor Salinas, our technicians arrive in uniform, background-checked, and ready to diagnose the gate in front of them, not sell a replacement that isn’t needed.
Crowley homeowners tend to stay put. They’ve lived through the 2000s buildout, they’ve seen what a North Texas summer does to cheap hardware, and they don’t want a handyman guessing at an opener circuit board. Our reputation across the Crowley area is built on showing up, doing the job once, and standing behind it with the written 90-Day Done Right Promise. If it’s not right, we return and make it right. It’s that simple, and it’s in writing.
Our Gate Repair Services in Crowley
Hinge & Post Repair
In Crowley, the hinge post is the failure point more often than the gate panel itself. Blackland Prairie clay shrinks and swells so aggressively that a post set in 2008 can be 1.5 inches out of plumb by 2024 without any impact, collision, or accident. A post that leans even half an inch will make a swing gate drag on its latch side, bind on the operator, and eventually tear hinge welds loose. We reset posts in deeper concrete footings, regrade the pad where water has pooled, and rehang the gate so it swings true through another decade of wet-dry cycles.
Gate Realignment
A gate that latched fine all summer will often be an inch out of plumb by February after the clay contracts. That’s not a hinge adjustment problem; that’s the ground moving under the post. Our realignment work for Crowley homes starts with measuring the post, checking the operator’s open and close limits, and determining whether the fix is an adjustment or a full reset. We’ll tell you which one it is before we touch a bolt.
Electric Gate Repair
Electric gate systems fail in specific ways in Crowley’s climate. Summer heat over 100°F cooks capacitors and power supplies inside opener housings. Ice storms like the February 2021 freeze crack solder joints and make circuit boards fault out weeks later. And the constant strain of a clay-tilted post causes motors to overdraw current until the thermal breaker trips. We service LiftMaster, BFT, Linear, Viking, Ghost Controls, and four other major brands, and we diagnose the electrical fault on the first visit in most cases.
Automatic Gate Repair
Automatic gates on Crowley’s rural-edge properties face a different set of problems than suburban ones. Long driveways, solar-powered operators, wide farm gates on pipe posts, and livestock pushing against panels all take a toll. On a rural driveway off FM 1187 south of Crowley, our crew found a 16-foot pipe swing gate sagging badly on a LiftMaster operator. The hinge post had heaved out of plumb from clay movement, so we reset the post in a deeper concrete footing, re-greased the hinges, and reprogrammed the operator’s open/close limits. The gate now runs true without binding, even after a heavy spring rain. That’s the kind of repair we do regularly across Crowley’s southern acreage.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
We’re trained and equipped on nine gate-automation brands, so whatever is on your driveway, we’ve seen it before. In Crowley we commonly service BFT, Linear, and Viking operators, along with LiftMaster and Ghost Controls on residential installs. Because we stock common boards, remotes, and safety eyes for these systems, most Crowley repairs are completed in a single visit rather than requiring a second trip after a part order. And every job carries our written 90-Day Done Right Promise.
Common Gate Repair Problems We See in Crowley Homes
- Clay heave tilting hinge posts: The Blackland Prairie soil swells with spring rain and contracts in summer drought, slowly pushing posts out of plumb. A gate that drags in winter but latches fine in July is almost always a post problem, not a hinge problem.
- Summer heat warping wooden privacy gates: 100°F plus direct sun warps cedar and pine panels on the 2000s-era privacy gates common to Crowley subdivisions. We see boards split, frames twist, and latch strikes move far enough to stop catching.
- Ice storm weld cracks on tubular steel gates: The February 2021 freeze hit ornamental wrought-iron and tubular-steel driveway gates hard. Sudden cold makes steel brittle; welds crack at hinge tabs and mid-rail joints. Those cracks spread with every open-close cycle until the gate fails.
- Operator burnout from misaligned gates: An opener that’s fighting a tilted post or dragging panel pulls more current than it should. Over a Crowley summer, that overheats the motor windings and burns out the capacitor. The fix is realignment first, then the electrical repair.
Pricing for Gate Repair in Crowley, TX
Here’s what gate repair in Crowley typically costs, based on what we see across 76036:
- Hinge replacement (single gate): $180-$320
- Post reset and regrade in clay soil: $350-$850, depending on depth and concrete type
- Gate realignment and operator limit reset: $200-$420
- Electric gate opener repair (boards, capacitors, limit switches): $280-$650
- Full opener replacement on an existing gate: $900-$2,400, brand and gate weight dependent
- Weld repair on tubular steel or wrought iron: $150-$450 per location
Older 2000s-era gates in Crowley HOAs tend to hit the lower end of hinge and realignment ranges unless clay movement has thrown the post badly. Rural pipe gates on the south side run higher because the posts are deeper and heavier. Every quote is written and agreed before work begins, so the number on the invoice is the number you approved. Call (817) 961-9404 for a free estimate on your gate.
We Also Serve Cities Near Crowley
Our Gate Repair team works throughout the Crowley area, including nearby Burleson, Joshua, Kennedale, and Keene. If you’re on Crowley’s edge near the Johnson County line or closer to the Burleson side, the same crew that keeps Crowley gates closing true is already working in your neighborhood. Learn more about our local coverage on the Gate Repair in Crowley page.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Crowley
Your gate is reacting to Crowley’s clay soil. Summer heat dries the Blackland Prairie clay around your hinge post, it contracts, and the post pulls back closer to plumb so the latch catches. Winter rain re-saturates the ground, the clay swells, and the post tilts again, dragging the gate an inch or more out of alignment. The permanent fix is resetting the post deeper and regrading drainage around the pad, not just adjusting the hinge every February. Call (817) 961-9404 and we’ll measure the post lean and tell you exactly what’s moving.
Yes. We install and service solar-powered openers on rural entrances south of Crowley regularly. A solar opener makes sense where running mains power to the gate would require a long trench, and the systems we fit on BFT and Linear operators handle wide, heavy farm gates well. We’ll size the panel to your gate’s weight, cycle count, and how much shade the tree line throws. Estimates are free, and the price is locked before we order anything.
Yes, and it’s a safety issue that should be addressed immediately. Safety edges and photo eyes are required on automatic gates for a reason. If your gate reverses inconsistently or closes on a car, the likely culprits are misaligned photo eyes, a failing safety edge, or incorrect close-force settings on the operator. In Crowley HOAs we often see this after a post shift knocks the photo eye out of alignment. We inspect and repair HOA gate operators across 76036, and we quote the fix before any work starts. Call us the same day you notice it.
We do. Sagging pipe gates on T-posts are common on the larger rural-edge lots south of Crowley. The issue is usually sinkage: the T-post on the hinge side settles or tilts in clay, the gate drops, and the latch side drags. We can reset the post in concrete, sleeve a new hinge, or refit the gate to swing level again. If the gate is wide enough to need an operator, we’ll spec one that can handle its span and weight. Estimates on farm gates are free.
The steel got cold, fast, and became brittle. Then the gate cycled normally in freezing temperatures and the stress concentrated at the welds, typically at hinge tabs and mid-rail joints. Wrought-iron and tubular-steel driveway gates around Crowley that had been through fifteen years of summer heat expansion and winter contraction cracked at the weakest points. We repair those welds and reinforce the joint, then rust-proof the area so a surface repair doesn’t become a structural one. Call (817) 961-9404 and we’ll put eyes on the welds and quote the repair.
Call Ironworks Gate Co. for Gate Repair in Crowley
If your gate is dragging, sagging, sticking, or refusing to open, call (817) 961-9404. A live person answers, any hour, any day. We’ll ask what the gate is doing, give you a straight answer about likely causes, and schedule a visit that fits your day. The quote is written before we begin, the work is done right, and it’s backed in writing by the 90-Day Done Right Promise. That’s been the standard at Ironworks Gate Co. since 1984, and it’s the same standard we bring to every driveway in Crowley.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving the Crowley area with dedicated gate repair and automation services.