Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Midlothian
Gate hinge replacement in Midlothian typically runs $220-$480, and post replacement on an average driveway gate starts around $350 and can reach $900 when the footer has failed. Most of our jobs in 76065 are completed in a single visit because the problem is rarely complicated, but it is always specific: clay soil moving under a post, wind racking a frame, cement dust eating a hinge. If your gate drags, sags, or shudders when the wind picks up, call us at (817) 961-9404 and we’ll send a technician who knows Midlothian soil and Midlothian gates.
Key Takeaways
- Hinge replacement in Midlothian: $220-$480 typical
- Post replacement: $350-$900 depending on footing condition
- Alkaline dust near US-67 accelerates hardware wear by years, not months
- Our crews reach most Midlothian neighborhoods within 60-90 minutes
- Every job backed by the 90-Day Done Right Promise, in writing
Why Ironworks Gate Co. Is Midlothian’s Preferred Gate Parts & Welding Company
We have been repairing and rebuilding gates long enough to know that Midlothian is not like the sandy-soil suburbs south of here. The clay under your gate moves. It swells in April and shrinks in August, and every shift pulls on posts, hinges, weld joints, and operator brackets. Homeowners in Midlothian do not just need a welder. They need someone who understands why the same gate went out of square twice in one year, and who will fix it so it stays fixed longer than the last guy managed.
Our Gate Parts & Welding team works on gates across Midlothian weekly. The reviews we get from homeowners around Mockingbird Lane, off FM 663, and in the newer subdivisions east of US-287 tend to mention the same things: the technician showed up when we said, explained the repair in plain English, and left the gate working better than it had in years. That is the standard. Victor Salinas built this company on the belief that a gate repair should not need a follow-up call, and the technicians he sends out are background-checked, uniformed, and held to it.
When you call, a live person answers, 24 hours a day. Not a voicemail, not an answering service. You tell us what the gate is doing, we schedule a visit to Midlothian, and we show up with the parts and tools to finish the job in one trip. Most of our Midlothian jobs are done in a single visit, and the price is agreed before a single bolt comes off the hinge.
Our Gate Parts & Welding Services in Midlothian
Hinge Replacement
Hinges on Midlothian gates take a beating that hinges in Grand Prairie or Arlington never see. Wind loads out here can be brutal, especially on solid infill gates or heavy cedar. A hinge that bends or shears is usually the first casualty. We replace it, reinforce the mounting point if the metal has torn, and make sure the gate swings true before we leave. Typical cost in Midlothian: $180-$360 per hinge set, depending on gate weight and whether welding is needed on the frame itself.
Post Replacement
In Midlothian, a leaning post is almost always about the soil, not the post. Blackland Prairie clay grabs hold of a post, swells when it rains, and heaves it upward when the ground dries and cracks. We do not just set a new post in a new hole. We go deeper, add gravel drainage at the base, and pour a footer that resists the heave cycle. A post replacement on a standard driveway swing gate in 76065 runs $350-$900, depending on depth needed and access for equipment.
Rail Repair
When a Midlothian gate gets racked by wind or clay movement, the rails take the stress. They bend, the welds crack, and the gate starts to drag or bind. We cut out the damaged section, straighten or replace the rail, and weld it back with proper penetration so the frame does not twist again the next time a front blows through. Rail repairs in Midlothian usually run $150-$400.
Custom Welding
Some gates are worth more than a hardware-store fix. We do custom welding on Midlothian properties all the time, from reinforcing sagging ranch gates to building new brackets, latch plates, and custom hinge assemblies that fit the gate in front of us, not the one in a catalog. If you have an older gate that no longer matches anything at the parts counter, a weld is often the cheaper and stronger answer than replacing the whole thing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Midlothian
Most gate hardware brands cross our path in 76065 on a regular basis. We work on openers and operators from BFT, Linear, Viking, and Ghost Controls, along with several others, and we keep common replacement parts and weldable components on hand so Midlothian customers are not waiting a week for a bracket. If your opener is fighting a sagging gate or a corroded hinge, the fix usually starts at the hinge, not the motor. We look at the whole system before we touch anything.
Common Gate Parts & Welding Problems We See in Midlothian Homes
- Post heave after spring rain: Midlothian’s expansive clay lifts posts out of the ground after heavy wet periods, and the gate starts dragging or binding against the latch post. It is the most common call we get between March and June in 76065.
- Wind-racked frames on solid infill gates: North Texas storms put enormous pressure on gates with no open slats to let the air through. Hinge brackets bend, frames twist out of square, and suddenly the gate will not close without a fight.
- Hinges seized by cement dust: Along the US-67 corridor, fine alkaline dust from the cement plants settles on gate hardware. It grinds into hinge barrels and latch mechanisms, and components that should last a decade fail in half that time.
- Operator strain from misaligned gates: When a gate goes out of alignment, the opener works against it every single cycle. That burns out capacitors, strips gears, and shortens motor life. The motor is often blamed. The hinge or post is usually the culprit.
On a 2-acre property off Old Fort Worth Road near the US-67 corridor, our crew found a heavy ranch-style swing gate sagging badly after a week of spring storms: the hinge post had heaved out of level, and the alkaline dust from the nearby cement plants had seized the original hinges solid. We cut out the old hinge post, poured a new post footing with deeper embedment and gravel drainage, welded on fresh heavy-duty hinges, and re-hung the gate with proper sag correction. Then we lubricated every moving part and checked the gate operator’s safety photocell before we left. That is what a repair in Midlothian actually looks like.
Pricing for Gate Parts & Welding in Midlothian, TX
| Service | Typical Range in Midlothian |
|---|---|
| Hinge replacement | $180 - $360 per hinge set |
| Post replacement (single gate post) | $350 - $900 |
| Rail repair | $150 - $400 |
| Custom welding (per hour) | $90 - $140 |
| Latch and lock replacement | $120 - $280 |
| Gate roller replacement | $140 - $320 |
Those are straight numbers for Midlothian work. What moves the price is depth, material cost, and whether the damage goes beyond the part you called about. We give you the number before we start, in writing, and we do not leave a surprise on the invoice. Free estimates are standard. Call (817) 961-9404 and we will walk you through it.
We Also Serve Cities Near Midlothian
Our Gate Parts & Welding in Midlothian crews regularly cross into Mansfield, Alvarado, Kennedale, and Burleson for the same kind of work. If you are just outside 76065, the drive time is short and the price does not change much. Call (817) 961-9404 and we will tell you exactly when we can be there.
Serving Midlothian, TX - Our Local Coverage Area
We’re based in the Midlothian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Midlothian
Because the Blackland Prairie clay under your gate posts expands when spring rains soak the ground, then contracts sharply during summer heat. Each cycle torques the post footing slightly, and over a season or two the gate racks out of square. Fixing it properly means setting the post deeper with drainage, then correcting the gate’s hang so the movement does not pull it out again. The 90-Day Done Right Promise covers the repair if it does. Call (817) 961-9404 to schedule an inspection while it is still acting up.
Most automatic gate openers in Midlothian have a manual release mechanism, usually a key, handle, or pull-cord near the motor housing. Disengage that release before trying to push the gate, and if the gate is on uneven ground or the wind is up, stand to the side, not behind it. If you are unsure which release type your opener uses or the gate will not move even after disengaging, call us at (817) 961-9404. We will walk you through it over the phone, day or night.
Often yes, especially if the post itself is still plumb and the concrete footing is sound. We cut away the broken hinge, clean the mounting surface, and weld a replacement hinge or a reinforced plate onto the existing post. If the post has rotted or heaved, welding alone will not last, and we will tell you that before we start. The decision comes down to what is actually holding the gate up.
The fine alkaline dust that drifts from the cement manufacturing corridor settles on exposed gate hardware. It works into hinge pins, roller bearings, and latch slides, grinding them like lapping compound. Gates within a mile or two of US-67 in Midlothian often show wear years earlier than identical gates in cleaner neighborhoods. Twice-yearly lubrication and inspection help, and it is a standard add-on we offer on every service call in that corridor.
Check the hinge brackets and top rail for bending or cracked welds, then look at the latch post. Wind racking usually bends something before it loosens something else. If the gate bangs against the stop, a broken or unadjusted closer spring may be the cause. If any part looks bent, welded joints are cracked, or the gate no longer lines up with the latch, stop using it and call (817) 961-9404. A slamming gate is tearing itself apart a little more with every gust.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Midlothian and the surrounding area.