Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterMighty Mule Gate Repair in Cleburne, TX | Ironworks Gate Co.
We provide independent Gate Repair in Cleburne and the surrounding Johnson County acreage, with most jobs completed in a single visit. The thing that sets our Mighty Mule work apart here is simple: we understand that a gate opener bolted to a pipe-frame gate hung on clay soil behaves differently than one bolted to an ornamental gate in a suburban lot. Call (817) 961-9404 and a live person answers, day or night.
We’ve been at this since 1984, and we’re certified on nine opener brands including Mighty Mule. For over 42 years, Cleburne homeowners and ranchers have called us when a gate stops working, and we show up with the right part, the right welder, and a written price before any work begins. We’re an independent service provider, not a factory-authorized dealer, which means we fix what’s actually broken rather than pushing a replacement you don’t need. Our Mighty Mule sales & service work is backed by our 90-Day Done Right Promise, in writing, on every job.
Why Cleburne Residents Choose Us for Mighty Mule Service
Victor Salinas, our owner, grew up in Cleburne not far from Hulen Park and learned welding and electrical fundamentals at Hill College in Hillsboro. That combination matters when you’re diagnosing a Mighty Mule opener on a 16-foot pipe gate that’s been hanging on creosote posts since the Reagan administration. We know the MM562, MM571W, FM200, and RB741 model lines inside out, and we know what Cleburne clay does to a post over twenty seasons.
We’re not a franchise and we don’t sub out to whoever’s available. Our background-checked, uniformed technicians carry genuine Mighty Mule control boards, actuators, and remotes on the truck, plus the upgraded aftermarket parts that hold up better in Johnson County heat and freezes. Most Mighty Mule repairs in Cleburne get done on the first trip. The price is set before we turn a bolt, and the 90-Day Done Right Promise means if it isn’t right, we come back and make it right, no arguing, no paperwork.
Common Mighty Mule Gate Repair Problems We Solve in Cleburne
- Rusted-out control board terminals. Condensation builds inside the plastic housing during Cleburne’s hot days and cool nights, especially on low-lying acreage near the Nolan River. We see corroded terminals that cause intermittent operation or complete failure. The fix is a clean board replacement, not a whole new opener.
- Stripped plastic drive gears in MM562 actuators. When clay soil heaves a gate post out of plumb, the gate binds mid-swing. Homeowners force it, and the plastic gear inside the actuator strips. We reset the post, realign the gate, and replace the gear, because if you only replace the gear, it’ll strip again next summer.
- Failed limit switches after hard freezes. February 2021 seized more than a few MM571W arms across Johnson County. The plastic internals crack when cold, and the gate starts reversing mid-travel or won’t fully close. We upgrade the limit cam to a metal part so it survives the next ice storm.
- Solar panel under-voltage on RB741 installations. Remote driveways outside Cleburne’s city power reach often run Mighty Mule solar kits. Johnson County summers above 100°F degrade sealed lead-acid batteries faster than the manual predicts. We check panel output, battery health, and wiring, and we retrofit with batteries sized for Texas heat.
- Hinge weld failures on heavy pipe gates. A Mighty Mule opener will keep pulling a gate that’s sagging until the hinge weld snaps. On Cleburne’s 5-to-20-acre properties, those gates are schedule-40 steel. Victor’s father was a welder, and Victor has spent decades welding. We fix the gate first, then the opener.
Mighty Mule Service in Cleburne: What Local Conditions Mean for Your Equipment
Cleburne sits on expansive clay soil that swells after spring rain and shrinks during summer drought. That movement heaves gate posts seasonally, enough to throw a gate out of plumb by August. A Mighty Mule opener doesn’t know the post moved; it just reads the resistance and trips the safety reverse, or the motor burns itself out fighting it. We routinely reset posts and realign actuators on the same Cleburne properties year after year, a cycle that doesn’t show up nearly as often in Burleson or Midlothian, where the soils are sandier and the gates are lighter ornamental steel.
This is the information no generic Mighty Mule page will tell you: in Cleburne, a gate that cycles perfectly in April will bind by late summer, and the opener gets blamed for a problem the soil caused. We see it on County Road properties, on acreage off Bethesda Road, and on ranches throughout the county where pipe swing gates were hung decades ago on creosote-treated posts that have since rotted at the soil line. A technician who doesn’t know Cleburne clay will replace the opener and call it fixed. We fix the post, the gate, and the opener, in that order.
Mighty Mule Models & Products We Service in Cleburne
We service the full Mighty Mule line that Cleburne homeowners actually have on their driveways. The MM562 dual swing opener, common on 1980s-to-2000s pipe-frame ranch gates. The MM571W heavy-duty arm, built for long, heavy schedule-40 steel gates. The FM200 single swing opener, popular on smaller acreage driveways. And the RB741 solar and battery-powered unit, installed on remote driveways where running utility power to the gate costs more than the opener itself.
When a part fails, we install genuine Mighty Mule replacement boards and actuators when available. For batteries, solar panels, and limit switches, we often recommend aftermarket parts that hold up better in Cleburne’s climate. If your Mighty Mule opener is over 12 years old and both the control board and actuator show damage, we’ll tell you honestly whether a new opener is cheaper than two major repairs. We carry common parts on the truck for fast Cleburne turnaround, so you’re not waiting on a backorder.
Mighty Mule Service Pricing in Cleburne
Here’s what Mighty Mule repair work typically costs in this area, based on what our crews see on Cleburne driveways week to week.
| Service | Typical Price Range |
|---|---|
| Control board replacement (MM562/MM571W/FM200) | $220-$390 |
| Actuator arm replacement (single arm) | $260-$410 |
| Limit switch replacement and arm realignment | $170-$280 |
| Solar panel and battery replacement (RB741) | $280-$520 |
| Post reset and hinge weld repair (per post) | $350-$700 |
The exact price depends on gate size, post condition, and which Mighty Mule model you have. A free estimate from us includes the diagnosis, so you know the cost before we start. We quote the price up front and you agree to it before any work begins, no surprises on the bill. Call (817) 961-9404 for an exact quote on your Mighty Mule opener, estimates are free.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mighty Mule Gate Repair in Cleburne
Yes, and it’s a pattern we see repeatedly in Cleburne. Rain swells the clay soil, the gate post shifts just enough to misalign the opener, and the safety sensors or limit switches send a false signal that opens the gate. The fix is realigning the opener to the gate’s true position, not just replacing the board. We check the posts and the gate swing before touching the opener, because if the post is moving, the problem will return. Call (817) 961-9404 and we’ll diagnose it properly.
You can absolutely replace just the control board on a MM571W, and that’s usually the right call if the board is the only failed component. A new MM571W board runs less than a quarter of a full opener replacement. But if your actuator arm is also clicking or binding, we’ll calculate both repairs. If the combined cost exceeds a new opener, we’ll tell you that in plain numbers instead of selling you parts one at a time. The decision is yours, with honest numbers from us.
Usually the keypad receiver, or the keypad’s battery, but occasionally it’s a blown keypad input on the FM200 control board. The way to tell: if the keypad’s backlight is weak or flickers, replace its battery first. If the battery is fresh and the remote still works, we trace whether the keypad is sending a signal the board isn’t receiving. We can test the keypad independently with a receiver on the truck before you spend money on the wrong part.
We do, and those RB741 solar installs are some of our regular Cleburne Gate Installation work. Remote driveways off the county roads often have no power at the gate, so everything depends on the panel, the charge controller, and the battery. Johnson County heat cooks sealed lead-acid batteries, and a panel shaded by an oak branch or caked with dust starves the whole system. We test the full circuit, clean and reposition panels, and replace batteries with units rated for Texas heat.
That’s most likely a stripped plastic gear inside the actuator, cracked or sheared when ice seized the gate and the motor kept trying to turn. On the MM562 and MM571W, the internal drive gear is the sacrificial part. We replace the gear, but we also inspect the gate itself for post shift and hinge bind, because a binding gate after a freeze is often the real culprit. For an exact diagnosis and a free estimate on the repair, call (817) 961-9404.
Service Areas Near Cleburne
We serve all of Cleburne service area and the surrounding Johnson County communities, including Keene, Joshua, Alvarado, and Crowley. Our Mighty Mule service in Itasca covers the acreage south of town, and our Mighty Mule service in Keene reaches the smaller properties along the county line. If your driveway has a gate and you’re within 30 miles of Cleburne, we’ll come take a look.
Book Your Mighty Mule Service in Cleburne Today
If your Mighty Mule opener is acting up, call us now at (817) 961-9404. A live person answers 24/7, not a voicemail tree. We’ll schedule a same-day or next-day visit, quote the price before any work starts, and back the whole job with our 90-Day Done Right Promise, in writing. If it swings, rolls, or latches, we can sort it out.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cleburne since 1984.