Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Crowley
Gate access control in Crowley, TX comes down to one question most of the time: will the keypad, card reader, or phone entry system still work after the ground moves under it? In Crowley, that question matters more than in almost any other market we serve. The Blackland Prairie clay under your subdivision swells with every spring rain and shrinks through every late-summer drought, and that cycle pulls gate posts out of plumb, stretches conduit, and turns a perfectly good access system into a fault-throwing headache. We fix that. Call (817) 961-9404 and we’ll send a technician who knows Crowley’s soil, not just the wiring diagram.
Why Ironworks Gate Co. Is Crowley’s Preferred Gate Access Control Company
We’ve been doing gate work for over 42 years, and in that time we’ve learned that Crowley is not like other cities in Tarrant County. The soil does things here. When a keypad mounted on a brick-veneer pillar starts dropping signal or a card reader stops recognizing fobs, the cause is rarely the board. It’s usually the post the board is mounted to, leaning a degree or two after a wet winter, stretching the wire inside conduit that was never sleeved properly when the house went up. Our technicians who serve Crowley check the ground first and the electronics second, because in this town that’s the order that finds the problem.
We’re familiar with the 2000s and 2010s subdivisions around FM 1187, the older lots near Deer Creek, and the rural-edge properties spreading south toward Burleson and Joshua. Our crews carry parts for the nine opener brands we service, so most keypad, intercom, and loop detector repairs in Crowley get finished in one visit. You won’t wait a week for a part to ship. And every job, from a simple keypad reprogram to a full phone-entry retrofit, carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No arguing.
Victor Salinas leads our access control work across Crowley. He has spent years watching this specific city’s gates bind in August and fault in January, and he trains every technician accordingly. When you call, a live person answers, 24 hours a day. Not a voicemail tree. When we say we’ll be there, we will.
Our Gate Access Control Services in Crowley
Here’s what we install, repair, and service across Crowley, from the HOA-governed brick subdivisions to the larger rural-edge lots where pipe gates still dominate.
Keypad Entry
Keypad entry is the workhorse of Crowley gate access. We install wireless and hardwired keypads on driveway gates throughout 76036, and we repair the two failure modes we see constantly: keypads that work until the post shifts, and keypads that were wired with direct-burial wire instead of proper conduit. In Crowley’s clay, that distinction decides whether a keypad lasts five years or fifteen. A new keypad installation in Crowley typically runs $350-$650 depending on the gate material and whether we’re adding it to an existing opener or running fresh wire.

Remote Control
Remote control systems are what most Crowley homeowners mean when they say “automatic gate.” We program, replace, and troubleshoot remotes and receivers for every major brand we service. The most common call we get from Crowley subdivisions is a remote that programmed fine in the spring and then stopped working by Thanksgiving. The remote usually isn’t dead. The gate frame has moved, and the operator is throwing an obstruction code before the remote signal even matters.

Phone Entry
Phone entry systems let you buzz a visitor in from your smartphone or have the gate call your house line. These systems are common on Crowley’s larger lots, where the driveway is long enough that walking to the gate isn’t a quick errand. We install cellular and VoIP phone entry units that don’t rely on a landline. In Crowley, a phone entry install typically runs $800-$1,400 including the unit, programming, and power run. If you already have a wired intercom at the house, we can often reuse that wiring and save you the trench.

Card Reader
Card reader systems show up most often on community gates and HOA entrances in Crowley, but we also install them for individual homeowners who want a fob or prox card instead of a keypad. The reader itself is the easy part. The hard part in Crowley is keeping the reader aligned to a gate post that wants to move. We mount card readers on a reinforced plate or sleeve the conduit deeply enough that ground movement doesn’t shear the wire. A basic single-reader installation starts around $500, and full multi-reader community systems run higher depending on the number of users and entry points.

Video Intercom
Video intercom is the fastest-growing request we get in Crowley, especially on the newer brick-veneer homes where the drive gate is a hundred feet from the front door. You want to see who’s at the gate before you buzz them in. We install video intercoms that stream to your phone, and we mount them so they stay tight to the pillar through wet-dry seasons. Expect to spend $1,200-$2,200 on a quality video intercom in Crowley, including power and connectivity work.

Smart Access
Smart access means controlling your gate from an app, setting schedules, and getting alerts when it opens. Most Crowley homeowners with smart access systems use them to let in lawn crews, pool service, or grandchildren without handing out remotes. We integrate smart controllers with existing openers and make sure the system keeps working when the gate settles. A smart access retrofit in Crowley typically runs $450-$850, depending on the opener’s age and whether it needs a new control board.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crowley
Our team is trained and equipped on nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’re not brand-loyal in a way that puts you at a disadvantage. If your Crowley home has a builder-grade opener that has been stalling for two years, we’ll tell you honestly whether it’s worth repairing or whether a replacement makes more sense. We stock common parts for these brands on our trucks, so most Crowley service calls get finished the same day we arrive. No waiting for a board to ship from California.
Common Gate Access Control Problems We See in Crowley Homes
Crowley’s housing stock and clay soil create a predictable list of failures. Here are the four we see most often:
- Builder-grade operator failure on 2000s-2010s subdivision gates. The operators that came with the house were sized for a perfectly plumb gate on a perfect day. After fifteen years of clay movement, the gate binds mid-cycle and the operator burns out. We replace the operator and fix the post so the new one doesn’t meet the same fate.
- Keypad and card reader wire continuity loss. Post movement stretches or pinches the conduit that was never sleeved during the build. The wire itself hasn’t failed. The connection has, because the ground pulled it apart. We re-run the wire properly and sleeve it so it doesn’t happen again.
- Manual gate converted to automation without a reinforced post footing. We see this on rural-edge lots and on larger properties where the homeowner bought an opener kit and installed it on a gate that was never meant to move under power. The hinge post twists after the first wet-dry cycle, the safety photocell trips, or the rack and pinion shears. We dig the deeper footing, re-plumb the post, and then make the automation work.
- Seasonal safety loop faults. The loop detector under the driveway reads fine in August and faults in January. The electronics are fine. The post has moved an inch, and the loop’s alignment threshold is tighter than the movement. We reset or re-run the loop so it holds through the whole season, not just the dry half.
Pricing for Gate Access Control in Crowley, TX
Let’s talk real numbers for the Crowley market. A keypad replacement on an existing opener runs $350-$650 installed. Adding a card reader for a single gate starts around $500. Phone entry systems for a 76036 home run $800-$1,400 depending on whether we can reuse existing wiring. A video intercom install generally lands between $1,200 and $2,200. Smart access retrofits are $450-$850. If a post has shifted, a full re-plumbing and deeper footing adds $250-$500 depending on gate size and access. We quote the full price before any work starts. You’ll know the number, in writing, before the first bolt turns. Call (817) 961-9404 for a free estimate, and remember our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Our dispatch and scheduling is coordinated from our Dallas-Fort Worth office, but the crews who serve Crowley live here, work here, and know the subdivisions off FM 1187 and the rural roads south of town. When you call for a Crowley gate access problem, you’re getting a local response, not a Dallas technician who’s never dug in Blackland clay.
We Also Serve Cities Near Crowley
If you’re in a neighboring community, we handle gate access control across the southern Tarrant County and northern Johnson County area. That includes Burleson, Joshua, Kennedale, and Keene. The same crew, the same 90-Day Done Right Promise, and the same understanding of how this region’s soil and weather treat a driveway gate. Visit our Gate Access Control service page to learn more about the full scope of our work, including welding, gate installation, and opener repair.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Crowley
Because the Blackland Prairie clay under your gate post shrinks in late-summer heat and swells with winter rain. That seasonal movement pulls the hinge post out of plumb just enough that the gate binds mid-cycle, and the operator reads the extra resistance as an obstruction. The opener isn’t failing. The ground moved. We fix it by resetting the post, often with a deeper footing, and then re-aligning the safety devices. Call (817) 961-9404 and we’ll check the post before we condemn the motor.
Yes, in most cases. We can mount a keypad or card reader on a manual gate and tie it into a low-voltage release, provided the gate’s hinge posts are still sound and the gate closes squarely. If the post has already shifted, we may need to correct that first. A keypad retrofit on a manual gate in Crowley runs $350-$650 plus any post work if needed.
Yes. Safety photo-eyes are required on any automated gate that opens across a driveway, and they have to be aligned properly to pass their own test loop. The issue in Crowley is that a builder-installed eye mounted on a shifting post can fall out of alignment while everything else still looks fine. We set the eyes with the post, not against it, so they hold alignment through the wet-dry cycle.
Look at the post, not the gate. If the hinge post is still vertical and the gate leaf sags on the hinge side, it’s a hinge or weld issue. If the post itself leans even slightly, the clay under it has moved and no hinge adjustment will fix the real problem. On a lot of Crowley properties we see both: the post leans, the gate sags, and the hinges have been cranked so many times they’re wallowed out. We correct the post first, then the hinges. Estimates are free.
On rural-edge lots we most often install BFT, Linear, and Ghost Controls, because those brands handle the wider temperature swings and rougher gate frames we see on pipe and T-post installations better than some residential brands. We also service Viking systems on larger estate properties. The operator is only part of the job. On a pipe gate south of Crowley, the post footing and loop detector matter just as much as the brand on the box.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Crowley, TX and surrounding communities.





Before
After
Before
After
Before
After