Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Kennedale
When a gate won’t open in Kennedale, it’s rarely a small problem. The black clay soil under the 76060 ZIP heaves with every wet-dry cycle, and a gate that worked fine in May can be out of square by August. We repair gates on acreage properties off Eden Road, Dickinson Road, and along the Mansfield border, and we understand how a 16-foot ranch gate behaves differently from a suburban ornamental driveway gate. If your gate is sagging, binding, or the opener won’t respond, call (817) 961-9404. A live person answers, and we’ll send a technician who knows Kennedale’s soil and gate stock better than anyone.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Repair Company
Kennedale homeowners and property owners call us because we’ve been doing gate work for over 42 years, and we treat every job like it’s on our own mother’s driveway. Victor Salinas and the crew don’t farm work out to subcontractors. Our technicians are background-checked, uniformed, and trained on nine gate-automation brands, so when a BFT or Linear opener on a Kennedale acreage gate fails, we diagnose it correctly the first visit.
The Gate Repair work we do in Kennedale gets the same treatment: a written 90-Day Done Right Promise on every job. If it’s not right, we come back. No paperwork, no arguing. That’s the Keystone Standard, and it applies whether we’re resetting a hinge post on a horse property near the Kennedale Speedway Park area or replacing a solar gate opener battery on a long driveway off Little Road.
Response time matters when your gate is stuck open and your livestock or your equipment is exposed. We schedule Kennedale calls with local technicians who carry heavy-gauge tubing, hinge weldments, and opener parts in the truck. Most jobs are done in one visit, with the price agreed on before a single bolt is turned.
Our Gate Repair Services in Kennedale
Hinge & Post Repair
On Kennedale acreage lots, the hinge post carries far more weight than the gate itself. A 16-foot tubular-steel gate hung on a post set in expansive clay will eventually lean, crack its footing, and drag at the latch side. We re-set posts in proper concrete footings, weld or replace failed hinges, and re-plumb the gate so the operator isn’t fighting the swing. On properties with horses or small livestock, we also check that hinge pins and pinch points aren’t a hazard to animals moving through the opening.
Gate Realignment
Seasonal soil movement in Kennedale pulls gate frames out of square by fractions of an inch at a time, until the latch no longer lines up and the opener starts throwing obstruction faults. We correct sag at the hinge point, re-level the gate, and adjust the latch and operator travel so the gate closes like it was hung yesterday. On welded-pipe ranch gates from the 1970s and 1980s, realignment often means cutting and re-welding hinge barrels rather than just nudging a bracket, and we’re set up for that.
Electric Gate Repair
An electric gate in Kennedale usually means an AC-powered operator on a residential driveway or a solar setup on a remote acreage entrance. We repair both. Wiring faults, blown control boards, dead batteries, failed photo eyes, and stripped drive gears all fall under this heading. When a LiftMaster or Viking unit stops responding on a property off Rendon Road, we trace the fault rather than guessing at parts, and we stock the common boards, capacitors, and limit switches in our service vehicles.
Automatic Gate Repair
Automatic gates on Kennedale’s larger lots see heavy cycles. School traffic in and out, delivery trucks, trailers, and ranch equipment all put strain on operators that a city driveway gate never feels. We service the full drive train: motors, gearboxes, chain and belt drives, rack and pinion on slide gates, and the control boards that tie everything together. If the gate won’t hold position, reverses unexpectedly, or grinds when it cycles, we find the cause and fix it properly rather than resetting the limits and hoping for the best.
Solar Gate Opener Repair
Rural Kennedale properties far from mains power rely on solar gate openers, and those systems have a predictable failure mode: they work all summer, then die during cloudy winter weeks. The panels don’t change, but the batteries lose capacity in cold, and the charge controller stops topping them off. We test panel output, replace batteries with properly sized units, and adjust the charge settings so the gate opens reliably through January. A solar gate opener that’s dropping voltage in cold weather isn’t something to ignore; a 700-pound gate that stops halfway open on a dark night is a problem waiting to happen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We’re trained and equipped on nine gate-automation brands, so whatever is on the gate post, we can work on it. Around Kennedale we see plenty of BFT and Linear units on residential driveway gates, plus Viking and Ghost Controls on solar acreage installs. We stock local parts for these brands, which means faster turnaround when a control board or limit switch fails. If the operator on your Kennedale gate is older or the brand sticker is long gone, we can still identify it and source the part rather than selling you a full replacement you may not need.
Common Gate Repair Problems We See in Kennedale Homes
- Hinge posts heaving out of square. The wet-dry cycle of Tarrant County’s expansive black clay pushes post footings upward unevenly. On Kennedale ranch gates, this shows up as a latch side that sags two inches lower than the hinge side within a single season.
- Operators burning out on wide gates. A 16-foot or 18-foot swing gate weighs as much as a small car, and a residential-grade operator rated for a 12-foot suburban gate will strip gears or overheat the motor trying to move it. We see this on acreage entrances all over the 76060 ZIP.
- Solar openers failing in winter. Cloudy weeks in December and January starve the batteries, and a gate that opened fine in July won’t budge in February. The fix is usually a battery replacement and charge controller adjustment, not a new panel.
- High-cycle commercial slide gates wearing out. Fabrication shops and industrial yards along Kennedale’s light-industrial corridor run their gates dozens of times a day. Rack and pinion wear, failed loop detectors, and worn rollers are the most common failures, and they need commercial-grade parts, not residential replacements.
Pricing for Gate Repair in Kennedale, TX
A typical hinge and post repair on a Kennedale acreage gate runs $250 to $700, depending on the post size and whether we’re re-setting it in concrete or just welding a new hinge barrel. Gate realignment for sag correction usually lands between $180 and $450. Electric gate repair, including diagnostic time and common parts like control boards or photo eyes, typically costs $200 to $600. Solar gate opener battery replacement runs $150 to $350, and a full solar opener diagnosis with panel testing is around $100 to $200. Every price is quoted and agreed on before we start work, so you’ll never see a surprise on the invoice. Standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and 5% off for seniors and veterans. Call (817) 961-9404 for an exact quote; estimates are free.
We Also Serve Cities Near Kennedale
Ironworks Gate Co. works throughout south Tarrant County, and we regularly take calls from Mansfield, Burleson, Crowley, and Alvarado. If you’re just outside Kennedale on a county road or in a neighboring subdivision, the same crews and the same 90-Day Done Right Promise apply. See our Gate Repair in Kennedale page or call (817) 961-9404 and we’ll get a technician headed your way.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Kennedale
Kennedale sits on the same expansive black clay that defines much of Tarrant County, and that clay shrinks and swells dramatically with moisture. Heavy spring rains saturate the soil, then summer drought pulls the moisture out. The cycle exerts thousands of pounds of lateral force on post footings, and over a single season a properly set post can heave upward or lean several degrees. On heavy ranch gates, the added weight accelerates the movement. The fix is re-setting the post in a properly sized concrete footing, sometimes with rebar through the footing into undisturbed soil, and then re-plumbing the gate so it operates cleanly again. Call (817) 961-9404 and we’ll send someone out to look at your post and give you a straight answer.
Yes, and it’s one of the most common calls we get in the 76060 ZIP. Solar gate openers depend on batteries to store charge, and those batteries lose capacity in cold weather. Shorter winter days and cloudy stretches in December and January mean the panel isn’t producing enough to recover. The usual fix isn’t a new panel; it’s a properly sized replacement battery and, often, a charge controller adjustment so the system tops off correctly. We test the panel output, replace the battery with the right amp-hour rating for your gate’s cycle count, and verify the opener operates through a full open-close cycle before we leave. Call (817) 961-9404 for solar gate diagnostics in Kennedale.
Yes, and we do it regularly. These gates are built from steel tubing and welded pipe, often fabricated locally decades ago. Their hinges are welded barrels, their latches are often hand-built, and their posts are heavy. We repair them by cutting out failed hinge barrels and welding in new ones, straightening bent frame sections, replacing latch pins, and re-setting posts that have heaved. The work requires welding equipment and an understanding of how these gates carry weight, and our crew is set up for exactly that. If your ranch gate is sagging or the latch won’t catch, call (817) 961-9404 and we’ll come take a look.
That’s almost always a failed loop detector or a rack and pinion problem. Commercial slide gates on Kennedale’s light-industrial corridor cycle dozens of times a day, and the loop detector that senses vehicles is often the first component to fail. When it does, the gate doesn’t know the truck has cleared and won’t close, or it closes on vehicles. Rack and pinion wear will also cause the gate to bind partway through travel. We carry commercial-grade replacement detectors, rack sections, and control boards, and we can diagnose whether the issue is the detector loop in the pavement, the controller, or the drive system. Call (817) 961-9404 and we’ll get a commercial gate technician to your shop.
Yes, it can be. A gate that reverses without an obstruction is usually seeing a false signal from a photo eye, a failing safety edge, or a misaligned loop detector. It’s also a sign the control board’s entrapment protection settings are out of calibration. On Kennedale properties with children, pets, or livestock moving near the gate, a false trigger is a genuine safety concern, and a gate that reverses mid-cycle can leave your property open or close on someone unexpectedly. We test the safety circuit end to end, replace faulty photo eyes or edges, and recalibrate the operator’s entrapment settings so the gate closes only when it’s safe. Call (817) 961-9404 for a safety inspection; don’t wait for the gate to misbehave again.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale and the surrounding area.