Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Benbrook
A gate that won’t open is more than an annoyance in Benbrook. It’s a vehicle trapped in the driveway, a horse property left unsecured, a trip to the store that can’t happen. Most gate repairs in Benbrook run between $180 and $650 depending on whether we’re fixing a hinge, realigning a post, or replacing a control board. We dispatch crews to Benbrook daily, usually within one business day for non-emergency calls and faster for urgent work. Call (817) 961-9404 and a live person answers, day or night.
Ironworks Gate Co. has repaired hundreds of gates in Benbrook. We know the properties off Winscott Road, the ranch entrances along FM 2871, the lake-adjacent lots where rust never sleeps and clay never sits still. This page tells you what actually fails here, what it costs, and what can be fixed versus what should be replaced.
Key Takeaways
- Most Benbrook gate repairs cost $180 to $650, with post realignment on the higher end.
- A live person answers at (817) 961-9404, 24 hours a day, 7 days a week.
- Benbrook’s clay soil shifts posts up to 2 inches seasonally. That’s the dominant failure we fix here.
- Every job carries a written 90-Day Done Right Promise.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Repair Team
Benbrook homeowners tend to stay put. Many of our customers have lived in the same house for twenty or thirty years, on half-acre lots or larger, with gates that were hung when the house was built and openers added somewhere along the way. They’ve had handymen patch a hinge and leave. They’ve had someone “look at” a control board and never come back. That’s why a company that’s been doing this work for over 42 years, with written guarantees and a real person on the phone, matters here.
Our repair crews arrive in uniform, background-checked, and they work the way they’d work on their own mother’s property. We quote the price before any work starts. You know the number. We stand behind it. And if something isn’t right within 90 days, we come back and make it right. No paperwork, no argument. That’s the Keystone Standard, and it applies to every gate job we do in Benbrook.
Victor Salinas owns Ironworks Gate Co. and still insists on reviewing complex automation repair notes before we close out the day. That’s what 42 years looks like: the owner’s name attached to the work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook.
Our Gate Repair Services in Benbrook
We repair every part of a driveway gate system: the steel, the hinges, the motor, the controls, and the safety edges. Here’s what Benbrook calls us for most, and what we actually do when we arrive.
Hinge & Post Repair
Benbrook’s biggest gate problem isn’t the opener. It’s the ground the gate is bolted to. The shrink-swell clay around Lake Benbrook expands when wet and contracts when dry, and a gate post can move up to 2 inches between seasons. That movement bends hinge brackets, shears weld points, and drops the gate leaf until it drags on the driveway. We dig out the old footing, re-set the post in a deeper concrete pier with gravel drainage, and re-weld or replace the hinges so the gate hangs square again. On heavy ranch gates we radius the hinge plates to spread the load so a single weld isn’t carrying hundreds of pounds.
Gate Realignment
When a gate sags or binds, the frame has fallen out of square. Sometimes it’s the post. Sometimes the gate leaf itself has twisted over decades of heat and wind. We don’t just shim it and call it done. We bring the gate back to plumb, reset travel limits on the opener, and inspect every hinge and weld point for stress cracks. On gates off Winscott Road and FM 2871 where the clay is most active, realignment is seasonal maintenance, not a one-time fix. We’ll tell you honestly if your gate needs a re-set every couple of years or if a structural repair will hold it square for good.
Weld & Rust Repair
Lake-adjacent air carries moisture, and moisture is the enemy of untreated steel. We see rust-seized hinge pins on otherwise healthy gates, rust-bubbled paint hiding structural thinning, and weld beads that have cracked from years of post movement. In Benbrook, we check for both problems on every lake-adjacent service call: rust-seized hardware AND post plumb. We grind out failed welds, re-weld with proper penetration, and treat rust with a phosphoric conversion before priming and painting so it doesn’t come back in a season.
Electric & Automatic Gate Repair
Older Benbrook gates often run on operators installed in the 1980s and 1990s. We service the electronics, motors, limit switches, and safety systems on nine automation brands, including BFT, Linear, and Ghost Controls. If a board has failed, we tell you what a replacement costs versus what a new operator costs, and we give you the straight comparison. No upsell, just facts. Most electrical diagnoses in Benbrook are completed in a single visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
Whatever is bolted to your gate post, we’ve likely worked on it. Our technicians are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when your 1990s-era operator has an obsolete control board and you need to know whether a retrofit is possible or whether it’s time to replace. We carry common parts for BFT, Linear, and Ghost Controls in our service vehicles, so most Benbrook repairs happen in one trip, not two or three.
Common Gate Repair Problems We See in Benbrook Homes
- Post heave from expansive clay. The soil around Lake Benbrook moves more than any other factor we deal with. Posts tilt, hinges bind, and the gate leaf drags. This is the number one call we get in the 76126 and 76116 zip codes.
- Rust-seized hinges near the lake. Moisture off Lake Benbrook accelerates rust on untreated steel. A hinge that hasn’t been greased in years can seize solid even when the post is perfectly plumb.
- Legacy openers with obsolete control boards. Many Benbrook gates run on operators from the 1970s through 1990s. When those boards fail, modern safety photocells often can’t be retrofitted. We tell you straight: retrofit or replace.
- Storm damage along the lake corridor. Spring wind events blow down the open corridor and bend lighter gate panels or knock openers off their travel limits. After a storm, the gate usually needs travel-limit reprogramming or panel straightening.
Pricing for Gate Repair in Benbrook, TX
Here’s what Benbrook homeowners can expect to pay, based on the work we actually do here:
| Repair Type | Typical Benbrook Cost |
|---|---|
| Hinge replacement (single gate) | $180 - $320 |
| Post realignment (single post, dig and re-set) | $350 - $650 |
| Weld repair (cracked hinge bracket or frame) | $150 - $400 |
| Control board replacement | $280 - $550 |
| Full operator replacement (motor, arms, controls) | $850 - $1,800 |
The biggest cost driver in Benbrook is post work. Clay soil means digging deeper footings, sometimes adding gravel drainage, and occasionally replacing a post that’s rotted below grade. A gate that only needs a hinge is a relatively quick job. A gate that needs a post re-set is a half-day project. We quote the exact number before any work starts, and that number doesn’t change. Free estimates, written price, no surprises.
Standing offers for Benbrook customers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Mention any of these when you call (817) 961-9404.
We Also Serve Cities Near Benbrook
Our Gate Repair crews cover Benbrook and the surrounding communities daily. If you’re in Cleburne, Itasca, Keene, or Joshua, the same team, the same written guarantee, and the same live-person phone support apply. Scheduling works the same way: call (817) 961-9404 and we’ll give you a straight appointment window.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Benbrook
Benbrook sits on a stretch of expansive black clay that runs through the lake basin, and it’s far more active than the soil under most Fort Worth neighborhoods. The clay absorbs water during wet seasons and shrinks during drought, and that cycle moves a gate post up to 2 inches vertically and laterally every year. Fort Worth’s soil, particularly on the east and north sides, is more stable. In Benbrook, the fix is a deeper concrete pier with gravel drainage at the base, which isolates the post from the active soil zone. If your gate has shifted, call (817) 961-9404 for a realignment quote.
In most cases, no. Control boards from that era weren’t designed to communicate with modern safety edge sensors or photocell logic. You can sometimes add an aftermarket safety loop, but if the board won’t recognize modern entrapment protection, your only real option is a new operator. We’ll show you the comparison: what a replacement board costs (if one exists), what a new operator costs, and whether any of the old hardware can be reused. The quote is free. Call (817) 961-9404 and we’ll give you straight numbers.
Usually hinge repair or frame realignment, not a new panel. A sagging gate means a top hinge has worn out, a hinge bracket has pulled away from the post, or the frame has twisted. We check the post first. If the post is plumb and the hinge is the problem, we replace the hinge assembly and re-weld the bracket. If the frame itself is bent, we can often straighten or reinforce it with a welded gusset. Replacement only makes sense when the steel has thinned from rust or the frame is cracked beyond repair.
The moisture off Lake Benbrook accelerates rust on untreated steel, and once a hinge pin rusts solid, the gate seizes even if the post is perfectly plumb. The long-term fix is to replace the hinges with greasable, zinc-plated or stainless pivot assemblies and then treat the surrounding steel with a rust converter and marine-grade paint. We also check for post movement while we’re there. On lake-adjacent properties, rust and post heave almost always happen together. Treating one without checking the other means another service call inside a year.
After a wind storm, the most common cause is the travel limit being knocked out of sync. Wind pressure can push the gate leaf past its set limit, or debris can block the safety edge and trick the opener into thinking something’s in the way. Check for branches, rocks, or buildup along the track or curb. If the gate path is clear and the opener still stops short, the limit switch needs reprogramming. That’s a quick service call for us. Call (817) 961-9404 and we’ll send a tech to Benbrook, usually the same day or next.
Contact Ironworks Gate Co. in Benbrook
If your gate is stuck, sagging, rusting, or simply worn out, call (817) 961-9404. A live person answers. No voicemail tree, no answering service. We’ll schedule a time, send a background-checked technician in a marked vehicle, and give you a written quote before any work begins. Whether you’re on a half-acre ranch-style lot off Winscott Road or a horse property near the Army Corps land, we know the ground and we know the gates. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook.