Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Alvarado
Gate repair in Alvarado usually runs between $145 and $485 depending on whether we’re resetting a leaning post, replacing a snapped hinge, or rewiring an automatic opener. Most jobs are completed in one visit. If your gate is dragging on the latch side after a dry summer, or it quit opening after the last storm, call (817) 961-9404 and a live person will answer, day or night.
We know this stretch of Johnson County well. The soil here moves more than people expect. That movement is behind most of the gate failures we see in Alvarado. Whether you live off County Road 401, near the high school, or in a newer ranchette subdivision off I-35W, we’ll give you a straight answer and an upfront price before any work starts.
Why Ironworks Gate Co. Is Alvarado’s Preferred Gate Repair Company
Ironworks Gate Co. has been standing behind gate work for over 42 years, since 1984. We’re not a general handyman service that happens to take gate calls. Gates are all we do. Driveway gates, estate gates, ranch gates, and the automation that opens them. That focus matters when a 400-pound tube-steel swing gate has pulled its hinge post out of plumb, because a wrong guess under that kind of weight can hurt someone.
Our crews know what Alvarado soil does to a gate. We carry welding gear and gate operator remotes on the same truck, because on a single property line here you’ll often find a decades-old pipe cattle gate and a new solar-powered automatic driveway gate 50 feet apart. A live person answers our phone 24 hours a day, 7 days a week. When you call from Alvarado, you get a schedule, not a voicemail tree.
Victor Salinas leads our team, and he holds every job to the same standard we’ve used for four decades: the Keystone Standard. If a gate we fixed isn’t right within 90 days, we come back and make it right. That promise is written, not spoken. No forms, no arguing.
Our Gate Repair Services in Alvarado
Electric Gate Repair
Electric gate repair in Alvarado typically runs $160 to $380, and covers failed circuit boards, dead remotes, and automated openers that have stopped responding. Lightning strikes and power surges from severe thunderstorms are common culprits here, especially on rural properties with long service drops. Before we swap any part, we test the full circuit so you’re not buying a new board when the fault is actually a corroded wire in the conduit.
Automatic Gate Repair
Automatic gate repair in Alvarado usually lands between $180 and $420. When a swing gate won’t close fully after a storm, or it starts and stops mid-cycle, the issue is often a misaligned safety photocell, a bent arm, or a limit switch knocked out of adjustment by wind load. We service BFT, Linear, Viking, and Ghost Controls systems, among others, and stock common boards and sensors so most fixes happen in one trip.
Hinge & Post Repair
Hinge and post repair is the most called-out service we handle in Alvarado, with square deal pricing ranging from $200 to $550 depending on post size, gate weight, and how far the footing has failed. Blackland Prairie clay shrinks into finger-width cracks when summer drought sets in. Hinge posts that weren’t set below the active clay zone lean within a single wet-dry season. We cut out bad concrete, bell-bottom new piers, and re-set the post so it stays where it’s put.
Gate Realignment
Gate realignment in Alvarado typically costs $120 to $300. A gate that drags on the latch side, rubs the opener arm, or won’t catch the latch is usually out of plumb at the hinge post. In most cases we true the gate back to square, re-shim the hinges, and adjust the automated operator to match. A straight gate isn’t cosmetic. A sagging 16-footer grinds the opener gears and can eventually rip the post bolts out entirely.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alvarado
Our technicians are factory-trained on nine gate-automation brands, including BFT, Linear, Viking, and Ghost Controls. We keep common boards, sensors, and remotes on our trucks so most Alvarado repairs don’t wait on a parts shipment. If your system is older or out of production, we can usually cross-reference what’s available and tell you honestly whether a repair or a replacement motor makes more sense. No brand snobbery and no upselling.
Common Gate Repair Problems We See in Alvarado Homes
- Leaning hinge posts from shrinking clay. During Johnson County summer droughts, the gumbo soil shrinks and cracks, letting the concrete footing shift. A 14 to 16 foot gate starts tilting, drags on the latch side, and pulls the post over by inches.
- Slide gates knocked off track after heavy rain. When storm runoff saturates the frost line, fence-line posts heave unevenly. Rack and pinion rail alignment snaps, and the exit loop detector loses sync so the gate won’t sense a vehicle leaving.
- Sheared lag bolts on brick-column gates. In the newer ranchette subdivisions along the I-35W corridor, solid infill gates act like sails in a severe thunderstorm. Wind load can shear the hinge-post lag bolts straight out of brick columns.
- Solar-powered openers failing after a week of cloud cover. It’s not always the battery. Birds nesting on the panel, dust film from county roads, and shaded install spots are common in rural Alvarado, and we can often correct the placement before an expensive battery replacement.
Pricing for Gate Repair in Alvarado, TX
Three out of four gate repairs in Alvarado cost less than $400. Here’s the breakdown by job type:
- Gate realignment and hinge shim work: $120 to $300
- Hinge replacement with new weld or bolt hardware: $150 to $280
- Post reset with larger concrete footing or bell-bottom pier: $240 to $550
- Automatic opener board or sensor replacement: $180 to $420
- Full gate rehang including post and hinge repairs: $300 to $650
Every price is quoted and agreed before any work starts. If we find something unexpected mid-repair, we stop, call you with the cost, and wait for your go-ahead. No surprise invoices. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Alvarado
You’ll find our Gate Repair crews working in Keene, Burleson, Cleburne, and Mansfield as well. The same written 90-Day Done Right Promise follows every job, whether the gate is on a hundred-acre spread outside Alvarado or in a subdivision half a mile from the tracks in Keene. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Alvarado directly.
Serving Alvarado, TX - Our Local Coverage Area
We’re based in the Alvarado area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Alvarado
Because your hinge post is likely leaning out of plumb. Alvarado sits on Blackland Prairie clay that shrinks into deep cracks during summer drought. When the clay pulls away from your post footing, the concrete loses lateral support and the post tilts under the weight of the gate. We fix it by resetting the post below the active shrink-swell zone, which prevents the same lean next year. Call (817) 961-9404 for an exact assessment and quote, and ask about our free estimate.
If you’re comfortable doing so, check that the safety photocells are still aligned and free of storm debris, because a misaligned beam will stop the gate mid-cycle. Listen for grinding at the opener arm, which indicates a bent arm or shifted post. Do not try to force the gate closed by hand. That can damage the gearbox. If the gate still won’t close, call us at (817) 961-9404 and we’ll come out from Alvarado with a same-day repair window.
Yes, and we do it regularly on rural Alvarado roads. Many local properties have a decades-old pipe gate on cedar posts at one entrance and a modern automated swing gate at the paved driveway apron. Our trucks carry welding gear, gate operator remotes, and spare parts for both, so one service call covers the whole property. The price for the old gate hinge and latch work is separate from the automatic opener repair and is quoted before we begin.
Locate the manual release lever or pull handle on the operator arm or gearbox, usually near the motor itself. Pull it firmly once and the gate should unlock from the motor so you can push it open by hand. Do not force the gate open while the motor is engaged, and don’t run the opener until power returns and you’ve re-secured the release. If you can’t find the release or the gate won’t budge, call (817) 961-9404 and we’ll talk you through it or dispatch someone to Alvarado right away.
Thirty-six inches is the minimum we recommend in Alvarado’s gumbo clay, but most heavy automatic gates do better with 42 to 48 inches and a bell-bottomed pier below the active shrink-swell zone. Some of our local Alvarado repairs have required dismantling and re-setting a post that a previous contractor set in a shallow 18-inch footing that failed within one year. If your gate has leaned once, it will lean again unless the concrete goes deep enough. Call (817) 961-9404 for a free estimate and we’ll tell you exactly what your gate needs.
Contact Ironworks Gate Co. for Gate Repair in Alvarado
A leaning gate and a dragging post do not get better with time. Let us look at it, tell you what’s wrong, and quote a square deal before any wrench turns. Call (817) 961-9404 and a live person will answer, day or night. Whether you’re off FM 3136, near the Alvarado city limit, or on a county road out by the I-35W corridor, our team will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Alvarado and surrounding Johnson County communities with gate repair, automation, and welding for over 42 years.