Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Cleburne?
Gate repair in Cleburne typically costs between $150 and $450 for standard maintenance, sensor adjustments, or minor hardware replacements. For more significant issues, such as motor replacement or major structural welding, homeowners can expect to pay anywhere from $800 to $2,500, depending on the specific brand of the opener and the complexity of the gate system. At Ironworks Gate Co., we believe in upfront pricing, meaning we settle the cost before we turn a single bolt. If you need a professional assessment, call (817) 961-9404 for a free estimate.
When you live in a place like Cleburne, your gate faces unique challenges. The North Texas soil, which is often heavy clay, can shift significantly with the changing seasons. This movement affects how gate posts sit in the ground, which in turn causes alignment issues that stress the motor and hinges. We have been serving this community for over 42 years, and we have seen how these local environmental factors dictate the type of repair a gate needs. Whether you have a slide gate that is dragging or a swing gate that refuses to close, the repair cost is determined by the root cause, not just the symptom.
Gate Repair Cost Breakdown (2026)
To give you a clear picture of what to expect, we have outlined the standard cost ranges for common gate services in the Cleburne market. Keep in mind that these are estimates based on standard labor and parts for the nine major brands we service: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
| Service Type | Estimated Cost Range |
|---|---|
| Standard Service Call & Diagnostic | $125 – $175 |
| Gate Hinge or Wheel Replacement | $200 – $500 |
| Gate Opener/Motor Repair | $300 – $800 |
| Full Motor/Opener Replacement | $900 – $2,500+ |
| Welding & Structural Repair | $250 – $600 |
| Safety Sensor Alignment/Replacement | $150 – $300 |
| Access Control/Keypad Repair | $150 – $400 |
The final price depends on whether we are simply adjusting a sensor or performing a complex structural weld. We offer a $50 discount on any repair over $250, and we provide a free second opinion on any written estimate you may have received from another company. Our goal is to provide a square deal, which means an upfront price with no surprises on the bill. If you are ready to get your gate working correctly, call (817) 961-9404 today.
What Affects Gate Repair Pricing in Cleburne
Several factors influence the final cost of your gate repair. Because we have been in business since 1984, we have learned that the age of the installation, the brand of the equipment, and the specific geography of your property all play a role in the complexity of the work.
- Gate Material and Weight: A heavy, custom-wrought iron gate requires different handling and stronger motors than a standard aluminum or chain-link gate. The heavier the gate, the more stress it puts on the hinges and the motor, which can lead to more costly wear and tear over time.
- Soil Movement and Post Alignment: In Cleburne, the clay-heavy soil is notorious for shifting. If your gate posts are not set deep enough or if the soil has moved, your gate will become misaligned. Correcting this often requires more than just a motor fix; it may require structural work to re-set the posts or reinforce the hinges.
- Brand-Specific Parts: We specialize in nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some of these systems have proprietary parts that are more expensive to source than others. We carry parts for these specific brands so that we can complete most jobs in a single visit.
- Electrical Complexity: Older gates often have outdated wiring that may not meet current electrical standards. If we find that the issue is not the motor but the electrical supply, we will need to address the wiring to ensure the system is safe and reliable.
- Frequency of Maintenance: A gate that has not been serviced in years will often have multiple points of failure. We recommend an $89 seasonal tune-up to prevent these smaller issues from compounding into a major, expensive repair.
If you are looking for Gate Repair in Cleburne, it is helpful to know that our technicians are background-checked and uniformed. They are guided by the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. We treat your home the way we would treat our own mother’s home.
The Ironworks Difference: Our 90-Day Done Right Promise
When you call Ironworks Gate Co., you are calling a company led by Victor Salinas that has been part of this community for over 42 years. We do not believe in temporary fixes that fall apart the moment we drive away. We stand behind every job with our 90-Day Done Right Promise. This is our Keystone Standard. It is a written, no-hassle guarantee. If the repair is not right, we come back and make it right. There is no paperwork, no arguing, and no exceptions.
Many companies in the industry focus on volume, trying to get in and out as fast as possible. We focus on the craft. Whether we are welding a hinge or programming a new keypad, we want the gate to close as smoothly as the day it was first hung. Victor Salinas has built this company on the belief that a gate is not just a piece of metal, but a vital component of your home’s security and convenience. We are the company that plans to be in town for another forty years, and we know that reputation is earned one job at a time.
We are available whenever you need us. A live person answers the phone 24 hours a day, 7 days a week. We do not use voicemail trees, callback queues, or answering services. When you call (817) 961-9404, you are speaking to someone who can help you right away.
How to Save on Gate Repair
We understand that gate repairs are rarely planned expenses. That is why we offer several ways to help keep your costs manageable while still receiving high-quality service.
- Use Our Standing Offers: We offer $50 off any repair over $250. If you have a written estimate from another company, we provide a free second opinion to ensure you are getting a fair price.
- Seasonal Maintenance: Prevention is the most effective way to save money. Our $89 seasonal tune-up helps catch small issues like loose hinges or misaligned sensors before they turn into motor failures.
- Senior and Veteran Discounts: We are proud to support our seniors and veterans with a permanent 5% discount on our services.
- Call Early: Do not wait until the gate stops working entirely. If you hear grinding noises, see the gate moving slower than usual, or notice the sensors acting erratically, call us. Fixing a minor issue is always cheaper than replacing a burned-out motor.
For a free estimate or to schedule your service, call (817) 961-9404. We are ready to help.
Safety First: Why Professional Gate Repair Matters
Gate systems, particularly those with automatic openers, involve high-tension springs, heavy metal panels, and electrical components. These are not projects for a DIY weekend. We have seen the results of improper repairs, and they can be dangerous. High-tension springs, in particular, can cause severe injury if they snap or are released incorrectly.
When you hire Ironworks Gate Co., you are hiring trained professionals who are equipped to handle these dangers safely. We know how to relieve tension, how to secure the gate during the repair, and how to test the system so it does not pose a hazard to your family, your pets, or your vehicles. Our technicians are trained on the specific safety requirements for the nine brands we service. If your gate is behaving strangely, stop using it immediately and call a professional. It is better to have a gate that is temporarily stuck than to have a gate that causes an injury.
FAQs - Gate Repair Cost
How much does it cost to replace a gate motor in Cleburne?
Replacing a gate motor typically costs between $800 and $2,500, depending on the brand, the size of the gate, and the existing infrastructure. We service nine major brands, including LiftMaster, FAAC, and Viking, and we will provide an upfront price before we begin any work. Call (817) 961-9404 for a free estimate.
Is it cheaper to repair or replace my gate?
In most cases, a repair is more cost-effective, especially if the structural integrity of the gate is still sound. We specialize in welding and motor repair, so we can often restore a gate that others might tell you to replace. If the cost of repair approaches the cost of a new installation, we will tell you honestly so you can make the best decision for your home. Call (817) 961-9404 to discuss your options.
Can you fix my gate on the same day?
We strive to complete most jobs in a single visit. Because we are trained on nine major brands and carry common parts, we are often able to diagnose and fix the issue immediately. If a specialized part is required, we will let you know upfront. Call (817) 961-9404 to see if we can get to your property today.
Does the soil in Cleburne really affect my gate?
Yes, the clay-heavy soil in the Cleburne area is prone to shifting, which causes posts to move and gates to become misaligned. This misalignment puts extra strain on your motor and hinges, leading to premature failure. We have 42 years of experience dealing with these local soil conditions and can help you reinforce your gate to withstand the movement. Call (817) 961-9404 for an inspection.
What is your 90-Day Done Right Promise?
Our 90-Day Done Right Promise is our written guarantee that if the repair we perform is not working correctly, we will come back and fix it, no questions asked. It is a no-hassle, no-paperwork promise that ensures you never have to pay twice for the same problem. If you need reliable service, call (817) 961-9404.
Common Gate Problems We See in Cleburne
After 42 years in the business, we have seen just about every way a gate can fail. In Cleburne, we see a lot of the same issues, often caused by the environment or just the natural passage of time. Understanding these problems can help you identify when it is time to call for help.
One of the most common issues is a gate that drags on the ground. This is almost always caused by a shift in the gate posts or a worn-out hinge. Because our soil shifts, the posts that hold your gate can tilt, even just a fraction of an inch. That fraction of an inch translates to several inches of sag at the end of the gate. We have the tools and the welding expertise to correct this, whether it means adjusting the hinges or, in more severe cases, re-setting the post.
Another frequent issue is a gate that stops halfway or refuses to close. This is often an electrical or sensor issue. Automatic gates rely on safety sensors to detect obstacles. If these sensors are dirty, misaligned, or faulty, the gate will stop for safety reasons. We frequently see sensors affected by the dust and debris common in North Texas. We can clean, align, or replace these sensors to get your gate working smoothly again.
Finally, there is the motor itself. Motors are the heart of your gate system. Whether you have a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule, these motors are machines that require maintenance. Over time, the gears can wear out, the capacitors can fail, or the electronic boards can be damaged by power surges. We are trained to diagnose these issues quickly, saving you the expense of replacing a motor when a simple repair would suffice.
If you are experiencing any of these issues, remember that Ironworks Gate Co. is here to help. We are a locally owned and operated business, and we treat every customer with the respect they deserve. We do not use high-pressure sales tactics. We provide honest assessments and professional work. You can visit our home page to learn more about our full range of services.
Pricing reflects the Cleburne market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 961-9404. Written by Victor Salinas, Owner at Ironworks Gate Co., serving Cleburne since 1984.
What Our Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher