Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Rendon
A well-built driveway or estate gate in Rendon has to do more than look right. It has to stand plumb and square through Blackland Prairie clay that swells with every spring rain and shrinks hard in August. We’ve been setting and hanging gates in Rendon long enough to know what that soil does to a post, and we install accordingly. Call Ironworks Gate Co. at (817) 961-9404 for a free estimate on any gate installation in Rendon, from a single pedestrian gate to a matched pair of heavy ornamental driveway gates with automation.
Why Ironworks Gate Co. Is Rendon’s Preferred Gate Installation Company
Rendon homeowners have a different set of expectations than most suburban neighborhoods. This is an unincorporated Tarrant County acreage community, not a tract development, and the properties reflect that. We work on custom built homes from the 1990s through the 2020s, many with working livestock infrastructure sitting right alongside ornamental tube-steel driveway gates. That mix means our Gate Installation crews have to be equally comfortable welding a heavy farm gate hinge and programming a LiftMaster operator on a decorative entry. We are.
Victor Salinas leads our installation team. He’s spent decades on gate work across the DFW area, and he trains every Ironworks technician the same way: measure twice, set the posts deeper than the frost line and deeper than the clay movement, and never leave a job until the gate swings true and the motor runs quiet. That is why Rendon customers call us back for the second gate, the operator upgrade, the keypad addition, and refer us to their neighbors along Rendon Road and beyond.
We coordinate dispatch from our Dallas-Fort Worth office, and we keep crews scheduled into Rendon every week. When you call, a real person answers, 24 hours a day, 7 days a week. No voicemail trees, no callback queues. We tell you when we’ll be there, and we are.
Our Gate Installation Services in Rendon
Driveway Gate Installation
Most Rendon properties have long drives, often with a gate at the road and another utility gate further back near the barn or hay field. We install driveway gates of every type: sliding, swing, cantilever, and double leaf. The two questions that matter here are what the clay soil will do to the posts, and what the gate needs to do for you daily. We set posts in concrete footings deep enough to resist the heave cycle that moves shallower posts within a season. That is not speculation. We have reset enough posts in Rendon to know exactly where the failure starts.
Pedestrian Gate Installation
A pedestrian gate gets used more than any other gate on the property, and in Rendon it often lives right beside a heavy driveway gate at the road. We build and hang pedestrian gates that match the driveway gate in style and finish, so the whole entry looks like one piece. We also install keypads, card readers, and intercom systems for pedestrian entry, wired or solar. The gate needs to swing true the day we leave and still swing true after a hard winter. That is the standard.
Sliding Gate Installation
Sliding gates make sense on Rendon acreage where a long driveway has room for the gate to travel. The track has to be dead level, and the foundation under the track has to be stable. On Blackland Prairie clay, a poorly bedded track shifts within months and the gate starts jumping or grinding. We bed our tracks in reinforced concrete and set the posts below the movement zone. It costs a little more up front. It costs a lot less than redoing the job in two years.
Swing Gate Installation
Swing gates are the most common style on Rendon acreage. They fit the character of the properties here, both the ornamental iron entry gates and the practical farm gates. The challenge is the hinge post. When clay heaves, the post leans, the panels bind at the latch, and the hinges tear out. We install swing gates with deep set posts and heavy duty hinges sized for the weight of the panel, plus a steel frame behind ornamental work when the gate carries a lot of mass. A 600 pound double swing gate needs a post that will not move. We build for that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We are trained and equipped on nine gate automation brands, and for Rendon properties we keep parts stocked for the ones we see most in this area: BFT, Linear, and Ghost Controls are common on acreage homes and ranchettes here. Whether you need a new Ghost Controls opener installed on a solar swing gate or a BFT underground operator rebuilt under a Rendon driveway gate, we carry the parts and we know the wiring. Most installations are completed in one visit, with the price agreed before we turn a single bolt.
Common Gate Installation Problems We See in Rendon Homes
- Clay heave pushing gate posts out of plumb. Rendon sits on Blackland Prairie clay, and it moves more than most people realize. A gate post set in a standard footing can lean within one wet-dry cycle, binding the panel at the latch. We set posts deep and in concrete sized for the load.
- The two-gate property surprise. Rendon acreage often has a decorative electric gate at the road and a livestock gate deeper on the property. Clay movement hits both at once, and what starts as a single installation or repair regularly turns into two gates once we walk the property. We quote both honestly before work begins.
- Ice storm damage to ornamental gates. The February 2021 freeze and the ice storms before it bent ornamental iron panels and tore up operators when ice accumulated on arms and hinges. We reinforce hinge posts and specify operators with enough torque for icy conditions, then install ice-resistant mounting points.
- Operators undersized for the gate. A heavy custom iron gate needs an operator rated for its full weight plus wind load. We see gates in Rendon where the opener was sized for half the actual panel weight, and it fails within a couple of seasons. We size operators correctly the first time.
Pricing for Gate Installation in Rendon, TX
Here are straight numbers for Rendon, based on what we have installed and repaired in this area. A basic single swing driveway gate, 12 to 14 feet wide, installed with manual operation, typically runs between $1,800 and $3,200 depending on materials and ground conditions. A double swing ornamental gate with automation runs $5,000 to $9,500 installed. A sliding gate with track and operator is generally $4,500 to $8,000. Pedestrian gates start around $900 installed. The variables in Rendon are post depth and footing size, panel weight, and whether we need to remove an old failing gate first. Every quote is fixed and agreed before we start. Call (817) 961-9404 for an exact written number.
We Also Serve Cities Near Rendon
Ironworks Gate Co. provides Gate Installation in Rendon and the surrounding acreage communities. We regularly work in Cleburne, Itasca, Keene, and Joshua, where the soil conditions and property types are the same. Wherever you are in the Rendon area, we bring the same fixed pricing, written guarantee, and live answer on the phone.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Rendon
A swing gate on properly set deep footings is the most practical choice for most Rendon driveways, because it puts the load straight down onto concrete below the movement zone rather than relying on a long level track run. That said, a sliding gate works well if you are willing to invest in a reinforced track bed. For clay soil, the deciding factor is not the gate type, it is the footing depth and mass. We spec both for Rendon conditions on every quote. Call (817) 961-9404 and we will walk your property with you.
The panel is usually not the problem. The post is. Blackland Prairie clay expands when it is wet and shrinks when it is dry, and that cycle slowly leans posts out of plumb. Once the post leans even a few degrees, the panel sags and binds. Repairing the panel without resetting the post means the sag returns within months. The permanent fix is to reset the post in a deep concrete footing with proper drainage, then re-hang the gate to a true plumb line. That is the repair we make in Rendon more than any other.
Yes. Solar openers work well on Rendon acreage where running a power line to the gate would mean a long trench across pasture. We install solar-compatible operators from BFT, Linear, and Ghost Controls, sized for the panel weight and for North Texas sun hours. The battery bank matters as much as the panel, and we size both for cloudy stretches and cold weather. A solar opener on a heavy ornamental gate needs a serious battery reserve, and we build for that. Call us at (817) 961-9404 for an honest assessment of whether solar is right for your gate.
Jumping the track is almost always a foundation problem. The track bed underneath shifts with the clay, the track flexes or goes out of level, and the wheels lose contact. We see it on Rendon slide gates that were installed on a shallow slab or on compacted soil instead of a reinforced concrete track beam. The fix is to pull the gate, pour a proper reinforced bed, and re-set the track dead level, then re-hang the gate and adjust the wheels. A track that is truly flat and stable will not jump.
Automatic gates in Texas, including Rendon, must have a primary entrapment protection device and a secondary device, per UL 325 and ASTM F2200 standards. In practice, that means photocells across the gate opening and a reversing mechanism on the operator, plus a contact edge on sliding gates. We install every automatic gate with photocells, a properly calibrated reverse, and an audible alarm on the motor. These are not optional add-ons. They are the law, and they are the difference between a gate that stops for a child and one that does not. We will not install an automatic gate without them.
For a written estimate on any gate installation in Rendon, call Ironworks Gate Co. now at (817) 961-9404. You will talk to a real person, you will get a straight price, and the work will be done right and backed in writing for 90 days. That is the Keystone Standard, and it has not changed in over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rendon and the surrounding acreage communities.