Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Installation in Cleburne: What to Know First
Linear gate installation in Cleburne typically runs between $1,200 and $4,800 for a complete system, depending on gate size, opener model, and site work. Most residential Linear installations we quote take one to two days of labor, and we always settle the price in writing before the first bolt comes off the truck. This page is for homeowners in Cleburne, Cleburne’s lake communities, and the acreage east of town who own or plan to own a Linear opener and want the install done once, wired correctly, and backed in writing. If you’d rather skip the reading and just ask a question, call (817) 961-9404 and a live person will answer.
How Linear Products Fail - and How We Fix Them
Linear builds solid openers, but every brand has its habits. Here’s what we see in Cleburne, on real driveways, when a Linear gate install goes sideways or an existing one starts acting up:
- LDO series limit-switch drift. The Linear LDO50 and LDO33 residential swing-arm openers use mechanical limit cams that wear over time, especially on gates that open and close 20-plus times a day. The gate stops a few inches short or over-travels and stresses the hinge. We reset the limits, check the arm geometry, and replace the cam assembly when it’s wallowed out - an OEM part we keep on the truck for common models.
- APeX series control-board capacitor failures. Cleburne’s summer heat and the surge patterns we get during spring storm season are hard on electrolytic capacitors. On Linear APeX boards, a failing cap shows up as an opener that works one day and just hums or twitches the next. We replace the board with OEM when the opener is under warranty, and a quality aftermarket equivalent when it isn’t - and we’ll always tell you which we’re using and why.
- Radio receiver desensitization on the MEGACODE line. Linear MEGACODE receivers are generally reliable, but we’ve seen homes near Cleburne’s radio towers and newer subdivisions with dense Wi-Fi mesh get intermittent “gate won’t open from the car” complaints. It’s not the remote. It’s interference saturating the receiver’s front end. We relocate the antenna, add a filter, or step up to an external receiver mounted away from the house’s electrical panel.
- Drive-belt tension loss on PRO-Series slide operators. The Linear PRO series sliding-gate operators use a belt-drive reduction that stretches over the first year of daily use. In Cleburne’s clay soil, gates also settle slightly after install, which changes the track alignment and accelerates belt wear. We set tension, shim and level the track, and re-check at the 90-day mark as part of our Done Right Promise.
- Wrong-gauge wire from the original install. This is the quiet killer. We regularly find Linear operators on Johnson County acreage fed with 16-gauge speaker wire from a handyman install, because the gate worked fine on day one. Two years later, voltage drop under load trips the board or burns the motor windings. On a new Linear installation we run the proper 12-gauge THWN in conduit, sized to the run length from the house panel, so the opener gets full voltage even on a 200-foot driveway.
Our Linear Gate Installation Process
Every Linear job we do in Cleburne follows the same steady path. No skipped steps, no shortcuts.
- 1
Call and walk-through. You call (817) 961-9404, a live person answers, and we ask about your gate and your Linear opener. We schedule a site visit at a time that works for you.
- 2
Measure and inspect. We check gate weight, hinge condition, post plumb, power access, and clearance. On existing gates, we look at what failed and why - not just what broke.
- 3
Written quote. We put the price in writing, agreed before any work starts. The number on the quote is the number on the invoice. No surprises.
- 4
Install and wire. We mount the Linear opener, set travel limits, wire the power properly, install safety edges on automatic gates, and program remotes and any keypad you want.
- 5
Open-close cycle testing. We run the gate through full cycles, test obstruction reversal, check clutch tension, and make sure the gate is balanced and not fighting the opener.
- 6
Walk-through and guarantee. We show you what we did, hand you the remotes, and confirm the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No arguing.
What Linear Gate Installation Costs in Cleburne
Honest numbers, based on what we’ve quoted across Cleburne and Johnson County:
- Single swing gate with Linear LDO33 and one remote: $1,200 - $1,900
- Double swing gate with Linear LDO50, two remotes, and keypad: $2,200 - $3,400
- Sliding driveway gate with Linear PRO-Series operator and safety edges: $2,800 - $4,800
- Pedestrian gate with Linear keypad entry and maglock: $1,000 - $2,200
What moves the price: gate weight and steel thickness, distance from the electrical panel for the power run, concrete work for new posts or track foundations, and whether we’re pulling permits for setback or easement lines. We’ll walk you through every line item before we start, because a square deal means you know the price before the work begins. Call (817) 961-9404 for a free estimate on your exact setup.
Why Cleburne Homeowners Call Ironworks Gate Co. for Linear Work
We’ve been doing this in Cleburne for over 42 years, and Victor Salinas grew up here, not far from Hulen Park. This is not a franchise sending whoever is available. We train on nine gate-automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - because the right fix on the first visit matters more than the size of the logo on the truck. Every job is protected by our 90-Day Done Right Promise, in writing. And when you call at 10 p.m. because the gate won’t close, a live person picks up the phone - not a voicemail tree, not “we’ll call you Monday.” We’ll be there when we say. As an independent Linear service provider, we’re not tied to any manufacturer’s playbook - we do the job the way it should be done for a Cleburne driveway, and we stand behind it.
FAQs
No, a professional installation is exactly what the warranty expects. Linear’s warranty covers manufacturing defects in the opener, and installation by a qualified gate technician does not void it. What does void warranties, in our experience, is the wiring mistakes and skipped safety components we sometimes find on DIY or cut-rate installs. We install to code and to the manual, and we document the work at your request.
Most standard residential Linear installations are scheduled within one week of the site visit, once we’ve measured and ordered any custom steel for the gate itself. Labor is usually one to two days. A live person answers (817) 961-9404 any time, day or night, and will get your site visit on the calendar.
It depends on the part and your warranty status. For boards, motors, and safety edges on openers still under warranty, we use Linear OEM parts so you keep full coverage. On out-of-warranty equipment, we use quality aftermarket equivalents where they’re proven equal to or better than the original - and we’ll tell you plainly which one we’re quoting and why. We don’t hide parts decisions in the fine print.
Here’s the honest rule we apply: if the repair costs 60% or more of a comparable new opener, install new. A tired board plus a worn gearbox plus labor can creep past half the price of a fresh unit with a fresh warranty. We’ll show you the math before you decide, because Victor’s habit of not charging for parts a job doesn’t actually need is a good deal deeper than a discount.
Yes. We handle the full electrical run, in-ground conduit where the driveway requires it, safety edges on automatic gates, photo-eye obstruction sensors, and any keypad or access control you want. You will not need a second contractor. Call (817) 961-9404 and we’ll sort it out from the first measure to the final cycle test.
We do. We’re trained and equipped on LiftMaster, Mighty Mule, Ghost Controls, DoorKing, and four others besides Linear. So if you’ve got a Linear at the front gate and something else on the barn gate, one call covers both. If it swings, rolls, or latches, we can sort it out.
We keep a few standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Mention it when you call (817) 961-9404 and we’ll apply it to your quote.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Cleburne and nearby areas.