Ghost Controls Access Control Installation Nationwide

Ghost Controls Access Control Installation: The Cleburne Owner’s Guide

Ghost Controls access control installation in Cleburne typically runs $275 to $600 installed, depending on which module you need and how the existing wiring has held up in the Texas heat. We keep the most common Ghost Controls boards, receivers, and keypad kits on our trucks, so most jobs are finished the same visit. The way most Cleburne homeowners find out this part has failed is quiet: the remote stops working from the usual distance, or the gate opens on its own after a hard rain.

Call (817) 961-9404

If your Ghost Controls system has started behaving like it has a mind of its own, or stopped responding entirely, this page will tell you exactly what’s involved in putting it right. We’re an independent gate company, not affiliated with Ghost Controls, but we work on their equipment every week across Johnson County.

Key takeaways:

• Most Ghost Controls access control repairs are completed in one visit, parts and labor included in the up-front price.
• We’re trained across nine opener brands, Ghost Controls included, so the right module goes in the first time.
• Every job carries our written 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No arguing, no paperwork.

Which Ghost Controls Models This Applies To

Ghost Controls has kept their access control architecture fairly stable over the years, which works in your favor. The main compatibility split is between their older AX series and the current AXX and TSS series openers. If your control board is stamped with an AX part number, it often can be upgraded to the newer receiver without replacing the whole operator, and that’s a conversation worth having before you spend money on a discontinued board.

The quickest way to identify what you have: the part number is printed on the white sticker on the control board itself, usually near the terminal block. On the new AXX series, look for the label on the underside of the cover. If the sticker is faded or gone, a photo of the board layout is usually enough for us to match it. For OEM versus aftermarket, we lean OEM or known-good equivalents on Ghost Controls because their remotes and receivers use a rolling code system that cheap universal parts don’t always talk to properly. We’ve pulled generic receivers off gates in Keene and Joshua after the owner spent a weekend on a part that was never going to pair.

Signs Your Ghost Controls Access Control Installation Is Failing

• Remote range drops to ten feet or less. The receiver module on the control board is losing sensitivity, or the antenna wire has been pinched or corroded at a connection point.
• The gate opens without anyone pressing a button. We see this most often after thunderstorms roll through Cleburne in spring. A moisture-damaged receiver can phantom-trigger, and the fix is a new module, not a new remote.
• Keypad lights up but won’t operate the gate. The keypad itself still has power, but the relay or wiring back to the board has failed. Sometimes it’s a broken wire at a hinge point where the gate flexes.
• One remote works, another won’t, and re-pairing fails. This usually means the receiver’s memory has a fault. On Ghost Controls units, the receiver is often integrated into the main board, so replacing the board cures it.
• After a power blink, the gate forgets every remote and code. The board’s memory chip has been damaged by a surge. A whole-home surge protector on the gate circuit is a cheap insurance policy we recommend to every Cleburne customer after this happens once.

Replacement Cost & What’s Included

A new Ghost Controls receiver module or replacement control board in Cleburne generally falls between $180 and $420 for the part itself, and most access control installations total $275 to $600 with labor. Where you land depends on the specific module, whether the keypad and remotes need to be re-paired, and how much of the existing low-voltage wiring can be reused. We quote the full price up front, parts and labor together, before any work begins, so there’s no line item waiting to surprise you at the end.

Every access control installation comes with our 90-Day Done Right Promise in writing. The work is guaranteed, the parts are quality, and the price doesn’t change after you approve it. Victor Salinas grew up not far from Hulen Park and has spent decades working on Gates across Johnson County. He doesn’t pad a bill with parts a job doesn’t need.

DIY or Call Us?

There are two safe things you can check yourself before calling. First, confirm the outlet or breaker feeding the opener has power. Second, check the remotes’ batteries with a fresh set. That’s the limit of what we’d recommend, because access control work on a Ghost Controls opener involves low-voltage wiring, programming, and sometimes a board swap inside a cabinet that also carries line voltage. A wrong connection can fry the new board before it ever works, and a bad diagnosis means you’ve bought a part that doesn’t fix the problem.

If the gate still won’t respond after fresh batteries, call us at (817) 961-9404. We’ll talk through what it’s doing, give you a straight answer about likely cost, and schedule a time that works. A live person answers around the clock, not an answering service.

FAQs