Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
A new driveway gate in Benbrook typically runs $3,800 to $11,500 installed, depending on whether you’re automating a wide ranch entrance off Stevens Drive or adding a walk gate up by the house. Lead times run about one to three weeks once we measure and order materials. That’s the honest range. Call (817) 961-9404 and we’ll come out, walk the driveway with you, and write a firm price before any work starts.
We’ve been building and hanging gates across Tarrant County for over 42 years. Around Benbrook, the jobs look different than they do in newer Fort Worth suburbs. We’re dealing with long entrances, equestrian traffic, black clay that won’t sit still, and lake air that eats untreated steel. Gate Installation out here isn’t a weekend project. It’s a structure you’ll drive through every day for the next thirty years, and it needs to be set for this ground, not somebody else’s.
Why Ironworks Gate Co. Is Benbrook’s Preferred Gate Installation Company
Benbrook homeowners call us because the gate companies they called before didn’t understand what an acreage entrance actually demands. A 16-foot pipe gate on a horse property moves differently than a decorative aluminum gate in a planned subdivision. The soil heaves harder. The wind off Lake Benbrook hits wider panels with real force. And when a gate binds or an opener burns out, the person answering the phone needs to know what they’re talking about. A live person answers our line 24 hours a day, 7 days a week.
Victor Salinas leads our crew, and the standard he holds is simple: set every post like it’s going to outlast the driveway it’s guarding. Our technicians arrive in uniform, background-checked, and they work the way they’d work on their own mother’s property. Every job we complete in Benbrook carries the 90-Day Done Right Promise in writing. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Our Gate Installation Services in Benbrook
Driveway Gate Installation
Most Benbrook driveways are wide enough to need something heavier than a standard residential gate. We build and install tubular steel and iron driveway gates on half-acre lots near the golf course and on five-acre horse properties south of the lake. The driveway gate is the one you’ll operate most, so we pay close attention to operator sizing, hinge placement, and how the gate travels through Benbrook’s clay-driven post movement. You get a square deal: upfront price, no surprises on the bill.
Swing Gate Installation
Swing gates are the most common style we install in Benbrook, especially on acreage entrances where a sliding gate would need a long, level track run. A properly hung swing gate on welded pivot hinges will outlast two retrofitted opener systems. The trick is the post. In Benbrook’s shrink-swell clay, a swing gate post set at three feet will be out of plumb within two seasons. We set deeper than standard and use heavier Schedule 40 steel.
Sliding Gate Installation
Where the driveway slopes or where there’s no room for a leaf to swing inward, a sliding gate is the answer. Around Benbrook we see these on properties with hillside driveways and on commercial or ranch entries where a swing arc would block the road. Track alignment matters more here than almost anywhere else we work, because the ground moves. We weld our own steel frames in the shop and build track beds that tolerate seasonal movement without binding.
Double Gate Installation
Double gates are the standard for Benbrook horse properties and anything over about 14 feet of opening width. Two leaves splitting the load mean less stress on each hinge and each post, but only if both posts are set right and the opener is sized for the combined weight. We see a lot of double gates around Benbrook that were originally hung as manuals and later automated with residential-duty openers never meant for the span. When we install, we match the operator to the actual gate weight and wind load on that specific driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Benbrook
We’re trained and equipped on nine gate automation brands, and around Benbrook the ones we install most are BFT, Linear, and Viking. Each has its strengths for acreage work: BFT for heavy rams on wide steel leaves, Viking for reliable solar-capable operators on long driveways without mains power, and Linear for straightforward residential automation at a fair price. We keep common parts for these and Ghost Controls stock on hand, which means a faster turnaround when a board or a limit switch fails on a Benbrook call. You won’t wait a week for a part to ship from California.
Common Gate Installation Problems We See in Benbrook Homes
- Post footing heave from shrink-swell clay. Benbrook’s black clay can move a gate post 2 to 4 inches vertically in a single wet/dry cycle. Hinge posts tilt, the latch side binds, and the gate drags on the dirt. We set posts deeper here than code minimums and often use helical piers on heavy automatic gates.
- Lake moisture corrosion on hinges and pivot pins. Gates within a quarter-mile of Lake Benbrook or the Army Corps boundary rust out untreated hardware surprisingly fast. We’ve seen hinge pins snap clean through on gates less than ten years old. We spec galvanized or stainless hardware on every lake-adjacent install.
- Undersized operators on wide steel gates. A 16-to-20-foot tubular steel gate on a Benbrook horse property has real sail area when the wind comes across the lake corridor. Residential-duty openers strip gears and burn out motors. We match the opener to the actual load.
- No entrapment protection on older automatic gates. Many Benbrook properties have automatic gate openers that were retrofitted decades ago without photo eyes, reversing edges, or proper force settings. This is a safety issue, not just a code issue. Every automated gate we install includes entrapment protection that we demonstrate and test in front of you.
Pricing for Gate Installation in Benbrook, TX
Here are the numbers we quote around Benbrook, based on what we’ve built and installed in this city over the years. A single swing driveway gate in steel, installed manual, runs $3,800 to $6,200. A double swing gate for an acreage entrance runs $6,500 to $11,500, depending on width, steel gauge, and whether you add automation. A sliding gate runs $7,000 to $13,000 installed, with the track bed and steel frame included. Adding a solar-capable operator like a BFT or Viking for a gate with no mains power runs $1,800 to $3,400 on top of the gate itself. Pedestrian gates run $1,200 to $2,800 installed. We quote every job in writing before a single bolt is turned. Senior and veteran customers receive a permanent 5% discount. Call (817) 961-9404 and we’ll walk the driveway with you and hand you a firm number.
We Also Serve Cities Near Benbrook
Benbrook is our focus, and we also take calls from Cleburne, Itasca, Keene, and Joshua. If you live just outside the city limits toward the county line, call us and we’ll send a technician out to look at the entrance. Same crew, same written guarantee, same straightforward price.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Benbrook
We set gate posts in Benbrook at a minimum of 42 inches deep, and more often 48 to 54 inches on automatic gates and wide double leaves, with 4-foot concrete footings. In the heaviest clay sections south of the lake toward the Corps boundary, we recommend helical piers under the hinge posts. This is deeper than most general contractors go, and it’s the single biggest factor in whether a Benbrook gate still swings square in ten years. Standard practice elsewhere is 36 inches. That’s not enough here.
Yes. We install solar-powered gate openers on Benbrook properties every month, typically on acreage driveways where running mains power to the gate would mean trenching 200 to 400 feet through pasture or across a creek. We pair the operator with the right solar panel and battery capacity for your specific gate weight and daily cycles. BFT and Viking both make dependable solar-capable units. Call (817) 961-9404 and we’ll tell you honestly whether solar will handle your gate or whether you need a power run instead.
The usual cause around Benbrook is a combination of three things we find together on almost every sagging gate: the original hinge posts were set too shallow and the clay has since heaved them out of plumb, the hinges themselves were underbuilt for the leaf weight, and the gate was automated with an opener that yanks the leaf from the wrong point. The fix is a post reset on a proper footing, heavier welded hinges, and an operator sized to the actual load. We’ve corrected dozens of these around Stevens Drive and the equestrian properties west of the lake.
Yes, on every single automated gate we install, and yes, we demonstrate it before we leave. Entrapment protection means photo eyes across the gate opening, reversing edges or obstruction sensing depending on the gate type, and force settings that stop and reverse the leaf if it contacts anything. A gate without these can kill a child or a pet. We show you what triggers it, where the sensors sit, and how to test it yourself. It’s part of every automated installation we do in Benbrook, no exceptions.
We replace the hinges with galvanized or stainless units on the first repair if the gate is within range of lake moisture, and we coat the pivot pins and weld points with a rust inhibitor rated for humid, salt-free but moisture-heavy air. If the gate leaf itself is rusting through at the hinge mount, we cut out the rotted section and weld in a reinforced plate. On lake-adjacent Benbrook properties we recommend an annual visual check on hardware even when the gate operates fine, because the failure mode here is usually sudden: a pin corrodes internally and snaps without warning. Call (817) 961-9404 and we’ll inspect yours.
Call Ironworks Gate Co. for Your Benbrook Gate Installation
We’ve built and hung gates across Benbrook for over four decades, and we plan to be doing it for another forty years. That’s why we set posts deeper than the next company, spec hardware for lake air and heaving clay, and put our name on every job in writing. When you’re ready to talk about your entrance, call (817) 961-9404. Victor Salinas and our crew will come out, walk the property with you, and hand you a written price before a single bolt is turned. Free estimates, no obligation, and a live person on the phone whenever you call.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Benbrook and the surrounding Tarrant County communities.