Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Kennedale
Gate access control in Kennedale usually means one of two things: a keypad or card reader on an acreage entrance, or a full phone-entry and video setup on a long private drive. The work is different here than it is twenty minutes north, because many Kennedale properties sit on black clay soil that moves every season, and many gates are heavy pipe construction rather than light aluminum. When a post shifts, the opener fights the gate, the keypad stops working, and you’re left with a remote system that behaves unpredictably. Ironworks Gate Co. handles the whole job: the gate, the opener, the post, and the access system. Call (817) 961-9404 and a real person answers, any hour.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Access Control Company
Victor Salinas leads a crew that has been working on gates since 1984, and the work we do in Kennedale reflects a specific local reality: acreage gates outnumber subdivision gates here, and the soil underneath them never sits still. We service the 76060 zip every week, and our technicians know what happens to a gate off Dick Price Road or near Bowman Springs after a wet spring followed by a dry August. The clay swells, the post leans, the opener binds. Homeowners in Kennedale call us because we diagnose the post and the soil first, then the electronics. Our dispatchers coordinate from the Dallas-Fort Worth office, and crews arrive at Kennedale properties with the parts and the welding gear to fix both the steel and the circuit board in the same trip.
Every job we complete carries the 90-Day Done Right Promise in writing. If something is not right within ninety days, we come back and make it right. No forms, no argument. Background-checked, uniformed technicians work on your property the way they would work on their own mother’s. That is not a slogan. It is how we have stayed in business for over forty years.
Our Gate Access Control Services in Kennedale
Keypad Entry
Keypad entry systems on Kennedale acreage gates fail in patterns we see every week. The main culprits are corrosion at the wire terminals from sprinkler overspray, and intermittent contact failures from heat expansion on south-facing posts. We install weather-sealed keypads rated for direct sun and moisture, wired with connections that can survive a North Texas summer. A typical keypad install or replacement in Kennedale runs $280 to $520, including the unit and labor.
Remote Control
Remotes on rural gates stop working for reasons that have nothing to do with batteries. When a gate post heaves, the opener’s travel limit sensors misread the gate position, and the remote appears dead. We re-set posts, re-align the opener’s travel, and then program remotes. If the remote itself failed, we carry replacements for Linear, Viking, and Ghost Controls systems, among others. Remote replacement and programming in Kennedale typically costs $95 to $185.
Phone Entry
Phone entry systems let you buzz a gate open from your cell phone, usually through a cellular or VoIP module wired into the opener. On Kennedale properties with long drives and no landline, a cellular phone-entry module is the sensible choice. We install and configure phone entry on existing openers from LiftMaster, FAAC, BFT, and others. Phone entry system installation in Kennedale generally runs $650 to $1,200 depending on the module and whether we are adding a new antenna or cellular bridge.
Card Reader
Card readers are common on Kennedale’s light-industrial corridor, where fabrication shops and small commercial yards run gates through dozens of open-close cycles daily. These are high-cycle slide and swing gates that need commercial-grade card readers and NEMA-rated control boxes. We install and service proximity, Wiegand, and keypad-plus-card units. A commercial card reader install in Kennedale starts around $850 and goes up from there based on site conditions and control panel integration.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Kennedale customer has a BFT operator on a ranch gate, or a Linear system on a commercial slide, we do not have to call a brand rep and wait. We know the wiring, the programming, and the failure points. We also keep common replacement parts stocked for these brands, which means the job is usually finished on the first visit, in one trip.
Common Gate Access Control Problems We See in Kennedale Homes
- Post heave from expansive clay: The shrink-swell cycle of Tarrant County’s black clay pushes gate hinge posts out of plumb every year, and a leaning post throws off the opener’s limits and the access keypad’s alignment. This is the single most common root cause of access control failures in the 76060 zip.
- Solar battery failure after cloudy winter stretches: Kennedale acreage entrances without mains power rely on solar-charged opener batteries. When February brings freeze-thaw gray days, those batteries drain, and the gate goes dead. We test, replace, and upgrade solar banks to handle the load.
- Sprinkler overspray corrosion on keypads: Unpainted steel gates on acreage lots often sit near irrigation heads, and over years the constant wetting corrodes the keypad PCB and terminal contacts. Intermittent failures follow. We replace with sealed units and move wiring out of the spray path.
- Misaligned entrapment protection on shifting gates: When a gate post moves, the photo-eye beam and the safety edge stop lining up, and the gate reverses or refuses to close. UL 325 compliance matters, and in Kennedale it usually requires re-aiming the safety devices after re-setting the post.
Last month we reset a leaning hinge post on a 16-foot pipe swing gate off Dick Price Road, where seasons of black-clay shrink-swell had thrown the gate so far out of plumb that the FAAC operator’s safety photocells were constantly tripping. After re-setting the post in a deeper, reinforced footing, we re-hung the gate, aligned the rack and pinion, and upgraded the keypad entry to a weather-sealed unit that no longer shorts out after spring rain.
Pricing for Gate Access Control in Kennedale, TX
Here is what gate access control work in Kennedale typically costs, based on the jobs we complete in 76060:
- Keypad entry install or replacement: $280-$520
- Remote replacement and programming: $95-$185
- Phone entry system (cellular module + install): $650-$1,200
- Card reader install (residential): $450-$900
- Card reader install (commercial, light-industrial corridor): $850-$1,800
- Video intercom add-on to existing opener: $700-$1,400
- Diagnostic service call (applied to repair if you proceed): $89
Every price is quoted and agreed in writing before we touch a single bolt. No surprises on the final bill. We also honor $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans. Call (817) 961-9404 for an exact quote. Estimates are free.
We Also Serve Cities Near Kennedale
Our Gate Access Control crews work throughout southern Tarrant County. Along with Gate Access Control in Kennedale, we regularly serve Mansfield, Burleson, Crowley, and Alvarado. Same team, same 90-Day Done Right Promise, same live answer on the phone any hour of the day.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Kennedale
Yes, and most of the acreage gates we service in the 76060 zip run on solar. The key is sizing the panel and the battery bank for North Texas reality: a cloudy February week, followed by a heat wave, followed by more clouds. A properly sized solar setup with a quality battery bank handles that. An undersized one leaves you walking to the gate with a manual key. We size, install, and upgrade solar systems on BFT, Linear, Viking, and Ghost Controls openers. Call (817) 961-9404 for a free site look.
No. If the hinge post has heaved in the clay, a new opener will bind and burn out the same way the old one did. The post has to be dug out, re-plumbed, and re-set in a deeper footing, and then the gate re-hung before the opener goes on. We do the post work and the opener work in the same visit. That is the only way the repair lasts. Call (817) 961-9404 and we can look at it this week.
Yes. UL 325 applies to every automatic gate in the United States, and commercial slide gates need photo eyes, a reversing edge, or both, depending on the gate’s location and travel. On the light-industrial corridor off Kennedale-New Hope and Dick Price Road, we see gates that have had safety devices bypassed or disabled by previous repair attempts. We restore them to compliance, every time. Call (817) 961-9404 if you are not sure whether your gate meets the standard.
Yes. Most modern openers, including the BFT and Linear units common in Kennedale, will accept a video intercom add-on without replacing the whole system. You get a camera at the gate, a monitor inside, and two-way voice; some systems also offer cell-phone video. We wire it into your existing opener and configure everything on site. Expect $700 to $1,400 for a typical install, and the price is fixed before we start. Call (817) 961-9404 to talk through options.
The answer is in the post, not the remote. Our crews re-set the post so it stops moving, then re-align the opener so the remote is actually communicating with a gate that closes flush every time. Sometimes the fix is as simple as re-aiming the photo eyes and re-setting the travel limits. Other times the post needs a deeper, reinforced footing. Either way, we fix the cause, not the symptom. Call (817) 961-9404 when the remote starts acting up.
Call Ironworks Gate Co. in Kennedale Today
If your gate access control is unreliable, or if you are planning a new entrance on your property, call (817) 961-9404. A live person answers, twenty-four hours a day. We will schedule a visit to Kennedale, diagnose the problem, and give you a written price before any work starts. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale since our crews first set foot on its black clay soil.