Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Keene
Gate access control in Keene usually means one of two jobs: bringing a 40-year-old swing gate up to modern safety and entry standards, or replacing a keypad, receiver, or control board that has failed after decades of Texas weather. Most Keene jobs we handle are completed in a single visit, with a written price agreed before any work begins. We schedule around the way Keene actually lives, which includes Sunday service for the large Seventh-day Adventist community here. Call (817) 961-9404 for a free estimate, and a live person will answer, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Keene’s Preferred Gate Access Control Company
Keene is not like the towns around it. A significant share of residents observe Saturday Sabbath, anchored by Southwestern Adventist University and the Adventist community that built this city. That changes how gate service works here. Other companies from Burleson or Cleburne will schedule a Saturday callback without thinking twice, then wonder why nobody answers. We plan Keene work for Sunday when weekend service is needed. It is a small thing, but it tells you we know this town.
Our crews arrive in uniform, background-checked, and ready to work on whatever opener is on the driveway. We are trained and equipped on nine automation brands, and we stock common parts for older LiftMaster and Linear units that are still everywhere in Keene’s 1950s-to-1980s neighborhoods. Every job, from a keypad replacement to a full access control upgrade, is backed by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. Victor Salinas, our owner, holds every tech to that standard.
We also understand Keene’s soil. The Blackland Prairie clay under this town swells and cracks with the seasons, and that movement is behind most of the access control failures we see here. More on that below.
Our Gate Access Control Services in Keene
Our Gate Access Control work in Keene covers the full scope, from simple keypad swaps to full phone entry and smart access systems. Here is what homeowners in Keene call us for most often.
Keypad Entry
Keypad entry is the workhorse of Keene driveways. The older units installed on 1970s and 1980s swing gates are now failing at the control board, the membrane pad, or both. We replace keypads on those old gates regularly, and when the operator itself is still solid, a new LiftMaster or Linear keypad wired to the existing board is often the most cost-effective fix. Expect a keypad replacement in Keene to run $180 to $340 installed, depending on whether new wiring or a receiver is needed. The price is agreed before we start.
Remote Control
Remote control problems in Keene often trace back to the receiver, not the remote. Lightning from spring storms takes out receivers on older operators, and high-wind events bend panel gates enough to short the receiver wiring. We diagnose the whole chain, from remote to receiver to operator board. A receiver replacement typically runs $220 to $400 in Keene, and we keep programmed remotes on the truck so most jobs finish same trip.
Phone Entry
Phone entry systems let you open the gate from a call or app, which matters for Keene homeowners with long driveways and visitors from the university area. We install and retrofit phone entry on both existing swing and slide gates. If your old operator predates modern safety photocells, we will recommend adding them at the same time. A phone entry add-on in Keene typically runs $600 to $1,300 depending on the existing board and gate type.
Card Reader
Card readers make sense for Keene properties with regular visitors, caregivers, or staff. We install standalone readers and integrate card access with existing phone or keypad systems. Card reader installation in Keene typically runs $450 to $900 per entry point, with programming included. We walk you through adding and removing cards before we leave. Done right, and backed in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keene
We repair and install access control equipment from BFT, Linear, and Ghost Controls, along with six other major brands. Keene homes carry a mix of old LiftMaster workhorses on original gates and newer Viking or Ghost Controls units on infill properties at the town’s edges. Carrying parts for both generations means fewer second visits and less waiting. Most access control repairs in Keene are single-visit jobs for us.
Common Gate Access Control Problems We See in Keene Homes
- Keypad strike misalignment from shifting gate posts. Keene’s Vertisol clay swells in wet winters and cracks in summer drought. That heave tilts gate posts, and the keypad latch no longer lines up with the strike, so codes entered correctly do not release the gate. Re-plumbing the post in a wider footing is the real fix.
- Lightning-damaged receivers and control boards. Spring severe weather in Keene brings 60 to 80 mph straight-line winds and frequent lightning. Older operators without surge protection lose receivers and boards. If your remote stopped working after a storm, the receiver is the first thing we check.
- Sagging swing gates dragging the latch. Gates hung 40 to 60 years ago on original hinge welds sag over time. The gate drags, the latch binds, and the operator strains or trips its safety circuit. We correct the sag at the hinge post and re-set the footing when the clay has moved it.
- Operators without modern safety photocells. Many original Keene gates were installed before current UL 325 entrapment protection rules. Those old operators lack photocells, so sensors trip repeatedly or the operator fails after a lightning event. Retrofitting photocells is often required to make the gate safe and reliable.
Pricing for Gate Access Control in Keene, TX
Here are real numbers for Keene, not a vague “it depends.” Keypad replacement runs $180 to $340. Remote receiver replacement runs $220 to $400. Card reader installation runs $450 to $900 per entry. Phone entry retrofits run $600 to $1,300 depending on the existing board. Full access control upgrades on older Keene gates, including new keypad, receiver, and safety photocells, typically land between $900 and $1,800.
What changes the price is the gate itself. A 40-year-old tubular steel swing gate with a shifted hinge post costs more to correct than a ten-year-old aluminum gate with a simple board failure. We quote the full price before any work starts, in writing. No surprises on the bill. Call (817) 961-9404 for an exact quote. Estimates are free, and our $50 Off Any Repair Over $250 offer applies to most Keene access control repairs.
We Also Serve Cities Near Keene
We serve Keene and the surrounding Johnson County communities, including Gate Access Control in Keene work throughout Cleburne, Joshua, Alvarado, and Burleson. If you live just outside Keene proper, call us. We cover the whole area with the same Sunday scheduling awareness and the same written guarantee.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Keene
Keene’s Vertisol clay expands when wet and contracts hard during summer drought. That seasonal movement tilts gate posts and shifts the latch strike, so the gate frame flexes and the keypad or its wiring loses alignment. The keypad itself may be fine. We re-level the post, re-set the footing if needed, and re-align the latch. That usually solves the summer code failures for good. Call (817) 961-9404 for a free estimate.
Usually yes, if the gate’s steel and hinge welds are still sound. We recently retrofitted a 1970s tubular steel swing gate on Pecan Street near the Southwestern Adventist University campus. The original LiftMaster keypad entry had a dead control board, and the gate had sagged so badly the latch struck a half-inch high. Our tech replaced the keypad with a new LiftMaster keypad entry unit, re-plumbed the hinge post in a wider concrete footing after the clay had shifted it two inches, and added new safety photocells to bring the operator up to current UL 325 entrapment protection. The homeowner had it done on a Sunday, not Saturday. If your old gate is structurally sound, a phone entry retrofit is a practical upgrade.
We schedule Keene work on Sundays as the effective weekend service day, because a meaningful share of Keene residents observe Saturday Sabbath. This is unique to Keene in Johnson County. If a Saturday visit is needed for an emergency, we handle it, but our standard weekend scheduling for Keene is Sunday. Call (817) 961-9404 and a live person will sort out the right day with you.
In many cases, yes, but the honest answer depends on the panel’s condition and the track. Keene’s spring storms produce 60 to 80 mph straight-line winds that bend lightweight aluminum panels and pull them off their tracks. If the panel is bent, replacement is often cheaper than repeated repairs. If the panel is straight and only the track or rollers failed, a repair with a stronger track and wind-rated hardware is the better route. We will show you the damage and quote both options before any work starts. Free second opinion on any written estimate, too.
Not necessarily. Sagging is almost always a post problem, not an operator problem. In Keene, the Blackland Prairie clay shifts posts two or more inches laterally in a single post-drought season. The operator is often straining against a gate that no longer hangs square. Re-plumbing the post in a wider footing and correcting the hinge alignment usually restores smooth operation. If the operator is also 40 years old and lacks current safety photocells, then a replacement operator makes sense. We will tell you which path saves you money. Call (817) 961-9404 for an honest assessment.
If your gate access control in Keene is acting up, call Ironworks Gate Co. at (817) 961-9404. We answer live, 24/7. We quote the price before the work. We stand behind every job with the 90-Day Done Right Promise. And we schedule Keene the way Keene actually lives.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keene and Johnson County.