Linear Gate Access Control Nationwide

Linear Gate Access Control in Cleburne: What to Know First

If you own a Linear gate opener in Cleburne and the keypad, remote, or entry system has stopped responding, we can usually get it sorted in one visit. Most Linear access control repairs run between $185 and $475 depending on what actually failed, and you’ll know the exact price before we turn a single bolt. This page is for homeowners and property owners who need straight answers about Linear gate access control, which parts last, which ones don’t, and what a proper fix looks like. Call (817) 961-9404 and a live person will answer, day or night.

Call (817) 961-9404

As an independent Linear service provider, we’re not tied to a corporate service route or a scripted phone tree. We’re the local company that shows up with the right part on the truck and fixes it the first time.

How Linear Products Fail - and How We Fix Them

Linear gate access systems are solid, but they have personality. After four decades in Johnson County, we know their habits. Here’s what we see most often in Cleburne driveways:

• MegaCode receiver drifting off frequency. The Linear MegaCode series, common on older APeX and LS050 units, uses a single-button remote with rolling code technology. The receiver on the gate board can drift slightly over years of North Texas heat cycles. Symptom: the remote works from ten feet away but not from the street. Homeowners often assume the remote is dying, but in Cleburne we frequently find the receiver just needs its frequency dialed back in and the antenna lead checked for corrosion. That’s a $120 to $190 fix, not a whole new receiver.
• Keypad membrane failure on the AK-11 and AK-15. The Linear AK series exterior keypads use a rubber membrane over the buttons. After five or six Texas summers, that membrane cracks and lets moisture into the circuit board. You’ll see keys that work intermittently or not at all. We replace the keypad or the membrane with an OEM part when the housing is still good. If the housing is sun rotted, a full replacement runs about $95 to $240 installed.
• Relay chatter on linear gate boards running phone entry or card readers. When a Linear gate board controls both a keypad and a phone entry relay, the on board relays can start buzzing or dropping calls. This is usually a failing relay or a loose ground on the board, not a programming issue. We see it regularly on the older MC and LC series controllers still running in Cleburne’s established neighborhoods. A board level relay replacement is far cheaper than a new controller.
• Transformer fade on 24V access systems. Linear access peripherals on the 24V side, keypads, card readers, and loop detectors, can brown out when the transformer gets weak. The gate opens slowly or not at all, but the motor itself is fine. We test transformer output on every Linear access call before condemning anything else. A replacement transformer is under $100 installed.
• Failed loop detectors on Linear slide gates with free exit. Linear slide gate systems, particularly the SL series, often pair with a loop detector for vehicle exit. In Cleburne’s clay heavy soil, which holds moisture and shifts with the seasons, the saw cut loop wire can break underground. The gate won’t auto open for exiting cars even though the keypad and remote work fine. We test the detector first, then the loop itself, and we know how to cut a new loop in asphalt or concrete without turning your driveway into a mess.

Our Linear Gate Access Control Process

A Linear access control job with us goes like this:

1. 1
   Call and diagnosis. You call (817) 961-9404. A live person answers. We ask what the gate is doing, what type of entry system you have, and we schedule a visit. No phone menus, no tickets, no waiting until Monday.
2. 2
   On site testing. Our technician tests input power, transformer output, the receiver, the keypad, and the board. On a Linear system, we know exactly which test points to check and in what order, so we’re not guessing and swapping parts at your expense.
3. 3
   Straight pricing before work. We tell you what failed, what your part options are OEM Linear or a quality aftermarket equivalent when it makes sense, and the exact price. That number is agreed before we touch a tool. No surprises on the bill.
4. 4
   The repair. We carry the common Linear parts on the truck: MegaCode receivers, AK series keypads, loop detectors, transformers, and board relays. Most jobs are done in the same visit.
5. 5
   Test and clean up. We test every entry method: keypad, every remote, phone entry, loop detector, all of it. Then we clean up and walk you through what we did.
6. 6
   The 90 Day Done Right Promise. Every repair is covered by our written guarantee. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions.

What Linear Gate Access Control Costs in Cleburne

Here’s honest pricing for the most common Linear access control jobs we do in Cleburne:

• AK 11 or AK 15 keypad replacement: $120 to $240 installed, depending on whether the housing can be reused.
• MegaCode receiver repair or replacement: $180 to $320 installed.
• Transformer replacement for 24V access system: $95 to $160 installed.
• Loop detector replacement (excluding new loop cut): $170 to $280 installed.
• Complete Linear access control upgrade (keypad, receiver, wiring cleanup, testing): $450 to $800 installed.
• Phone entry or card reader integration with a Linear board: $350 to $900 depending on the system and hardware.

The main cost driver is whether the board itself has failed or whether it’s a peripheral component. A dead transformer is a quick, inexpensive fix. A fried main board is a bigger decision, and we’ll be straight about whether repair or replacement makes more sense for your situation. Estimates are free, and we honor what we quote. Call (817) 961-9404 for an exact price on your setup.

Why Cleburne Homeowners Call Ironworks Gate Co. for Linear Work

Victor Salinas grew up in Cleburne, not far from Hulen Park, and he has been working on gates and motors across Johnson County for decades. When you call about a Linear system, you’re talking to a company that knows the brand’s habits and the way Cleburne’s heat and soil punish electronics. We don’t send a handyman to diagnose a control board.

We also work on LiftMaster, Mighty Mule, Ghost Controls, DoorKing, and four other major brands. That matters because many Cleburne gates are hybrids: a Linear board here, a LiftMaster arm there, a Ghost Controls sensor someone added later. We sort it out regardless of what’s on the driveway. If it swings, rolls, or latches, we can sort it out.

Every job is a square deal: upfront price, no surprises on the bill, and a written 90 Day Done Right Promise behind the work. A live person answers our phone 24 hours a day. We will be there when we say.

FAQs