Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Kennedale
A gate motor that won’t open, groans mid-travel, or burns through limit switches is more than a nuisance on a Kennedale acreage lot, it’s a broken link between you and your livestock, your equipment, and the rest of the day. We fix it the first visit, most days. For Kennedale Gate Repair you can count on, Ironworks Gate Co. has been running service routes through Kennedale for over 42 years, and our techs know the 76060 ZIP, the clay soil, the older welded-pipe gates, and the commercial yards along the light-industrial corridor better than any generalist contractor ever will. Call (817) 961-9404 and a live person answers. Every time. Day or night.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Motor & Opener Company
Kennedale presents a workload that general handymen and one-truck operators simply don’t train for. Our techs arrive on a horse property off Dick Price Road to reset a sagging hinge post before lunch, then cross town to diagnose a worn rack and pinion on a light-industrial slide gate the same afternoon. That dual workload, heavy ranch gates and high-cycle commercial operators, is the daily texture of this city. It’s why we stock parts for older LiftMaster, Viking, and BFT units on the truck instead of ordering and waiting.
Every Kennedale job runs under the same standing rule. The Gate Motor & Opener team quotes the price before a single bolt gets turned, and every completed job carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing.
Victor Salinas built this company around a simple Keystone Standard: the 400th job gets the same care as the first. Uniformed, background-checked techs on every call. A live person on the phone 24 hours a day, 7 days a week, not a voicemail tree. And a crew that understands what Tarrant County clay does to a gate post that’s been in the ground since the Reagan administration.
Our Gate Motor & Opener Services in Kennedale
Motor Installation
Gate Installation - Kennedale pros know replacing an old operator on a driveway gate starts with the post, not the motor. If the post leans even an inch, the new motor works against the geometry and fails early. We check the post, re-plumb when needed, then install. Most motor installations on 76060 properties complete in one visit, with a printed quote agreed before work starts. Expect $1,100 to $2,400 for a residential swing operator installed, depending on gate weight, post condition, and whether new photo-eyes or a loop detector are part of the job.
Motor Repair
When a Kennedale gate motor fails, it’s usually one of three causes: a burned capacitor from a gate that’s out of balance, stripped internal gears from years of fighting post movement, or a control board that’s been fried by a North Texas electrical surge. We diagnose on site and repair most units the same day. A typical motor repair in Kennedale runs $240 to $680, with the exact figure settled before any work begins. If the operator predates modern entrapment protection, we’ll tell you honestly whether repair is even worth it.
Linear Motor
Linear arms are the right choice for many Kennedale residential gates, especially on the newer 2000s/2010s subdivisions where homeowners want quiet, controlled movement without a bulky underground operator. Linear units tolerate modest gate sag better than swing arms, but they still need a stable post and a properly adjusted teach-in cycle. Installation on a single-leaf driveway gate in Kennedale typically runs $1,250 to $2,100. Repairs to a failing Linear arm, stripped piston threads, worn clutch, failed limit switches, run $180 to $420 in most cases.
Slide Motor
Slide gates dominate the commercial and light-industrial side of Kennedale, and they see more cycles per day than any residential gate in this city. Rack and pinion wear is the leading killer of slide motors here, far more than in Mansfield or Arlington, because Kennedale’s fabrication shops and commercial yards cycle their gates constantly. We service the operator, the rack, the limit sensors, and the NEMA-rated control enclosure, with Kennedale Gate Parts & Welding expertise on every call. Slide motor replacement on a Kennedale commercial gate runs $1,800 to $4,300 depending on gate length, weight, and whether the control box needs a full swap rather than a board repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We carry factory training and stocked parts for nine major gate-automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Kennedale’s older acreage gates, we see a lot of early 2000s Viking and BFT units still in service, and we keep the boards and capacitors those units need on hand. If your gate has a Ghost Controls operator and you’re on the fence about replacing versus repairing, ask us when you call. We’ll give you a straight answer, not a sales pitch. Gate Motor & Opener in Kennedale customers get same-week scheduling on most parts-stocked repairs.
Common Gate Motor & Opener Problems We See in Kennedale Homes
- Clay-driven post heave. Tarrant County’s expansive black clay moves more than most people think. When the hinge post leans, the operator’s limit switches over-travel on every cycle, and that’s what kills motors on older LiftMaster and Viking units. We re-set the post below the heave line, then re-teach the operator.
- Legacy operators without entrapment protection. A photocell hit on a pre-2000 operator leaves the gate stuck mid-travel or dead-closed. On an acreage lot with a 40-degree temperature swing between 6 a.m. and 4 p.m., that failure is predictable, not random. Retrofit photo-eyes and a compliant control board fix it.
- Rack and pinion wear on light-industrial slide gates. This one is disproportionately common in Kennedale. The rack wears quietly until the operator’s internal gear strips, and by then the motor is gone too. Four times more common here than in neighboring suburbs.
- Solar panels that can’t keep up. Canopy trees grow fast on older Kennedale horse properties, and a gate that worked fine on solar for five years suddenly won’t hold a charge. We size the battery bank and panel to the actual shade, not the original install spec.
Pricing for Gate Motor & Opener in Kennedale, TX
A gate motor repair in Kennedale runs $240 to $680 for most residential units. Motor installation runs $1,100 to $2,400 for a swing operator and $1,800 to $4,300 for a commercial slide motor with rack. What moves the number: gate weight and length, post condition, whether entrapment protection needs retrofitting, and whether the control board is repairable or needs replacement. We quote the price in writing before work starts, and the bill matches the quote. We also run a $50 off any repair over $250 and a permanent 5% senior and veteran discount. Call (817) 961-9404 for an exact figure on your gate.
We Also Serve Cities Near Kennedale
While this page covers Kennedale specifically, our trucks run regular routes through Mansfield, Burleson, Crowley, and Alvarado. If you’re just outside the 76060 ZIP and need a gate motor repaired or replaced, call the same number. We’ll schedule you on the nearest route day.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Kennedale
Yes, and in fact that’s the correct order of operations. Retrofit work in Kennedale often starts with cutting out and re-pouring the hinge post footing below the clay heave line, then re-plumbing the post before the new operator goes on. Out near the acreage lots off Dick Price Road, we reset a leaning hinge post on a 1990s welded-pipe swing gate that had pulled a LiftMaster operator so far out of alignment the safety photocell tripped every third cycle. We re-poured the footing, re-plumbed the post, and added a loop detector so the operator stops fighting the gate’s natural sag. A retrofit like that typically runs $900 to $1,800 depending on post replacement and operator model. Call (817) 961-9404 and we’ll look at it in person.
The short answer is expansive clay. Spring rains swell the ground and soften the footing, then August drought shrinks the clay and the post shifts. The gate geometry changes with the seasons, and your operator’s limit switches and internal gears absorb the abuse. That’s why post re-setting and re-plumbing is a near-universal component of repair calls across the 76060 ZIP. We fix the post first, then the motor. Call (817) 961-9404 for a site visit and a written quote.
Almost always yes. Commercial slide gates in Kennedale’s light-industrial corridor run high cycles, often 100 or more per day, and need an operator with a heavy-duty duty cycle rating, a NEMA-rated control box, and a properly matched rack. Residential slide motors wear out quickly under that load. We stock and service commercial-grade operators, and we inspect the rack and pinion for wear before recommending a motor replacement. A commercial slide motor installation here typically runs $1,800 to $4,300.
Grandfathered does not mean safe, and the practical answer is usually yes. Operators without entrapment protection fail unpredictably, and a gate that closes on a child, a horse, or a delivery driver is a liability that a grandfather clause will not cover. The 90-Day Done Right Promise applies to every retrofitted system we install, and retrofitting an older Kennedale gate with compliant photo-eyes and a modern board usually costs $350 to $900 on top of the operator if the existing motor is still sound. Call (817) 961-9404 and we’ll give you a straight assessment.
It can, but only if the panel and battery bank are sized to the actual shade, not the sticker on the box. Mature canopy trees on Kennedale horse properties block the winter sun that solar builders assume. We’ve seen plenty of installs that died in December because the panel was specified for full sun. We measure the site, size the array and battery to the real conditions, and wire in a properly rated controller. A solar setup for a shaded 76060 property typically runs $1,100 to $2,200 including panel, battery, regulator, and installation.
If your Kennedale gate motor is failing, call (817) 961-9404. A live person answers, we quote the job before work starts, and every repair carries the 90-Day Done Right Promise. Free estimates, written quotes, no surprises on the bill.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Kennedale for over 42 years.