Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kennedale
Gate installation in Kennedale means working with clay that moves, posts that heave, and gates that were hung decades ago and need a second life. We’ve spent over 42 years in this trade, and our crews work Kennedale properties every week: acreage parcels off Mansfield Cardinal Road, older ranch homes near Kennedale Parkway, newer subdivisions south of I-20, and the small commercial yards along the industrial corridor. The job starts with a straight answer on what your existing gate can carry and what it can’t. Call us at (817) 961-9404 and we’ll come look.
Why Ironworks Gate Co. Is Kennedale’s Preferred Gate Installation Company
We’re a gate company, not a fence company that also hangs gates. That distinction matters in Kennedale, where the work is split between heavy ranch-style swing gates on acreage lots and ornamental driveway gates in newer tracts. Our Gate Installation team handles both, and the difference comes down to knowing how Tarrant County clay behaves when you weld a 500-pound gate onto a post sunk three feet into it. We’ve seen post footings in the 76060 ZIP heave two inches between a wet April and a dry August. If your installer doesn’t plan for that, your gate sags within a year no matter how square the initial install. Victor Salinas, who leads our company, has built his reputation on showing up, telling the truth about the soil, and putting it in writing with our 90-Day Done Right Promise. That’s the Keystone Standard, applied to every job we take. A live person answers our phone 24 hours a day, seven days a week. No answering service, no voicemail tree.
Our Gate Installation Services in Kennedale
Swing Gate Installation
Swing gates are the classic Kennedale entry, whether a single leaf across a two-car driveway or a double gate spanning a pasture entrance. Most of our swing gate work here involves solid, older frames: welded pipe, tubular steel, occasionally ornamental aluminum on newer homes. The install itself is only half the job. In Kennedale, the real work is the post. We set posts in 24-inch concrete piers with rebar and plan for the shrink-swell cycle so the gate stays plumb through the seasons. If you have an existing ranch gate with good bones but tired hinges, we can hang it square and fit a new operator. If the frame is cracked or the posts are beyond re-setting, we’ll tell you that before you spend a dollar.
Sliding Gate Installation
Sliding gates make sense where a Kennedale driveway slopes or where a gate would swing across a ditch, a pasture fence, or into the path of cars on a county road. The challenge on acreage is often the ground itself. A rolling gate on a sloped entrance needs a level track and a foundation that won’t shift when the black clay swells after spring rain. We pour for that. For commercial yards off Kennedale Parkway, where a slide gate might open forty times a day, we size the operator for the cycle load and use commercial-grade hardware that won’t burn out in a year. A residential opener under that workload fails fast. We don’t install that mismatch.
Double Gate Installation
Double gates are common across Kennedale’s half-acre and multi-acre lots, especially where a single leaf would be too long and heavy to swing safely. They also carry a specific failure mode on clay soil: the two hinge posts move independently, so the gates drift out of alignment and the latch stops catching. We see this constantly in the 76060 ZIP. The fix is not another latch. It’s proper footings and rigid post-to-post connection below grade, so both leaves live and die together. We install double gates as a system, not two singles bolted to whatever was there before.
Pedestrian Gate Installation
A walk gate beside a driveway or in a side yard gets far more cycles than the vehicle gate. In Kennedale we install both welded-steel walk gates matched to the driveway gate and lighter aluminum pedestrian gates for newer subdivisions. We hang them on hinge posts set to hold, not just to survive the first year. If you’re adding a walk gate near the street, talk to us about latch hardware that meets code and an intercom post if you’re planning access control later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kennedale
We’re trained and equipped on nine gate-automation brands, including BFT, Linear, Viking, and Ghost Controls. For Kennedale customers that means we can service and match what’s already on your property without ripping out a good motor because a technician only knows one brand. We stock common parts locally and schedule most installs in a single visit. If your old operator is an orphan brand nobody carries parts for anymore, we’ll recommend a replacement from a brand we can actually stand behind and service for the next fifteen years.
Common Gate Installation Problems We See in Kennedale Homes
- Posts leaning and throwing the gate out of level. Tarrant County’s expansive clay swells in wet months and contracts in drought. We regularly re-set posts on gates that were installed level twelve months earlier but now drag or bind. The original footing is the failure, not the gate.
- Operator retrofits on old pipe gates without post reinforcement. A 1980s double swing gate hanging on undersized posts will tear the post apart at the hinge once a motor takes over. We reinforce the hinge post before we mount a new operator, not after the weld cracks.
- Obsolete control boards on gate motors from the 1990s and early 2000s. Kennedale’s older homes often have operators with discontinued boards. We can repair many, but when the board is no longer available, the honest fix is a new operator matched to the existing gate.
- Commercial gates running residential operators. Yards along Kennedale’s industrial corridor sometimes have slide or swing gates cycling hundreds of times daily on a residential motor. They burn through limit switches and boards fast. We replace them with commercial-grade operators designed for the workload.
Pricing for Gate Installation in Kennedale, TX
A typical single swing gate installation in Kennedale runs $2,400 to $4,800, depending on the frame material and whether we’re replacing posts. A double swing gate on an acreage driveway typically runs $4,500 to $8,500 because it needs two substantial hinge posts and often a matched pair of operators. Sliding gates start around $3,500 for basic residential installations and go up significantly for commercial-cycle work off the industrial corridor. Adding an automatic operator runs $1,400 to $3,200 on top of the gate itself for most residential jobs. The price we quote is the price you pay, agreed before any work starts. Nothing gets bolted to your property without a written number first. Call (817) 961-9404 and we’ll come measure for free.
What Makes Gate Installation Different in Kennedale
Kennedale sits inside the DFW metro, but it holds onto a genuinely rural character. There are horse properties and small livestock operations inside city limits, and that shapes the gate work here. Our Gate Installation in Kennedale calls routinely involve heavy pipe or tubular-steel ranch gates hung on posts that have been heaved and re-set multiple times by the shrink-swell clay. A technician working Arlington or Mansfield might see one of those a month. We see them weekly. Our crew recently pulled a 1980s tubular-steel double swing gate off a half-acre property near the light-industrial corridor off Kennedale Parkway. The original hinge posts had heaved so far out of plumb that the operator’s safety photocells were misaligned every few weeks. We cut the old post footings, poured new 24-inch concrete piers with rebar, and retrofitted a LiftMaster LA400 swing gate operator with a solar kit to avoid trenching power across the pasture. The family wound up keeping the original gate frame after sag correction and a weld repair, which saved them a full replacement. That’s the kind of judgment call you only get from crews who know this ground.
We Also Serve Cities Near Kennedale
Our crews regularly work Mansfield, Burleson, Crowley, and Alvarado, so if you have family or a second property nearby, we can cover it. The same team that knows Kennedale’s clay and gate stock handles the whole southern Tarrant and northern Johnson County arc.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kennedale
Yes, in many cases we can reuse your existing welded-pipe gate. The gate frame is often fine; the failure is usually the posts, the hinges, or the operator. We correct sag, repair welds where needed, and fit a new operator sized for the gate’s weight and length. If the frame is rusted through or cracked at structural points, we’ll tell you and show you before recommending replacement. We don’t sell a new gate when the old one is serviceable. Call (817) 961-9404 and we’ll inspect it free.
The black clay under your post footings expands when it absorbs spring rain, and the footing lifts unevenly. When summer drought hits, the clay shrinks and the post can settle crooked. This shrink-swell cycle moves original footings every year, especially under heavy ranch gates. The permanent fix is a deeper footing with a concrete pier and proper rebar, not just re-shimming the hinge. We address this on nearly every older Kennedale gate we touch.
When you install an automatic gate operator, current safety standards require external entrapment protection: photocells and, depending on the gate type, safety edges or a monitored reversing mechanism. An old gate with no photocells cannot remain that way once it’s automated. We bring every retrofit up to current UL 325 safety requirements as part of the install. It’s not optional, and it’s not an upsell. It’s how gates are installed correctly now.
Often, yes. We build a level track bed and a concrete foundation on the slope rather than regrading the whole entrance. The gate rides on a level rail while the ground falls away around it. This is standard work on acreage driveways where a swing gate would hit the slope or need a longer leaf than the entrance can support. We’ll tell you honestly if your specific entrance geometry makes a slide gate practical, before any dirt gets moved.
The duty cycle. A commercial gate off the industrial corridor may run forty or sixty cycles a day against a residential gate that opens four times. Commercial operators are built for that: heavier gearboxes, higher-rated motors, cycle counters, and often NEMA-rated control boxes for dust and weather. We install commercial-grade equipment on those yards and residential equipment where it belongs. Installing the wrong one either burns out in a year or wastes your money. Call (817) 961-9404 and we’ll specify the right unit for the actual cycle load.
Call Ironworks Gate Co. for Gate Installation in Kennedale
If you’re in Kennedale and your gate is leaning, dragging, or dead at the opener, call us at (817) 961-9404. We’ll send a uniformed, background-checked technician who knows the soil, knows the gate stock, and knows what can be saved. Estimates are free. The price is written before we start. Every job is backed by our 90-Day Done Right Promise. Victor Salinas and our crews have stood behind this work for over four decades, and we plan to be doing it for another forty.
Written by Victor Salinas, Owner at Ironworks Gate Co., providing gate installation in the Dallas-Fort Worth metro area since 1984.